• Journal of Biosystems Engineering
• /
• v.42 no.1
• /
• pp.56-61
• /
• 2017

Purpose: High energy requirement and long cooking time are limiting consumption of pigeon pea (Cajanus cajan), a nutritious food. This study was performed to estimate energy and time demand by different methods of cooking pigeon pea. Methods: Pigeon pea (150 g) was soaked in 2.0 L of water at ambient temperature ($29{\pm} 2^{\circ}C$) to determine hydration behavior. Cooking experiments were conducted using aluminum and pressure-cooking pots. Efficiency of cooking was evaluated using four types of cooking appliances (kerosene, liquefied petroleum gas (LPG), electric, and charcoal stoves). Normal (continuous heating until the food was satisfactorily cooked) and control (controlling the energy input to closely match the actual energy required) cooking were conducted. Energy requirement and duration of cooking were determined using standard procedures. Results: Soaking increased moisture content from 11.99 to 30.01% in 90 min, while water absorption rate decreased with soaking duration. In cooking 150 g of pigeon pea using kerosene stove, presoaked normal pressure-pot cooking method consumed the least energy (10 800 kJ) and time (205 min), while unsoaked normal cooking consumed the highest energy (18 450 kJ) and time (336 min). Using LPG stove, unsoaked normal cooking method required the highest energy (52 470 kJ), while presoaked control pressure-pot required the least energy (14 405 kJ). For electric stove, the lowest energy (15 560 kJ) and shortest duration (105 min) were recorded during control cooking of presoaked sample in the pressure-pot. Conclusions: Control cooking was not practicable using charcoal stove. Generally, kerosene stove consumed the least energy, while electric stove was found to have the shortest duration of cooking.

• Korean Journal of Plant Resources
• /
• v.29 no.3
• /
• pp.339-346
• /
• 2016

This study was carried out to develop an effective seed propagation method for Thalictrum rochebrunianum var. grandisepalum (H. Lev.) Nakai by analyzing seed dormancy types and germination characteristics. Seeds were collected between September to October at Gangwon province, and well-selected seeds were used while being dry-stored at 4±1℃. The seed size ranged 4.52 × 1.58 ㎜ and the weight of thousand seeds were 1,603.5 ± 0.02 ㎎. The moisture content was 7.2%. Seeds were achene type, and morphology characters showed an elliptical shape and rough texture, and light brown in color. Moist-chilling treatment was conducted for dormancy breaking because the seeds had an undeveloped embryo of liner type. The embryo had developed during a moist-chilling period, constantly, and fully developed in 10 weeks. Consequently, it seemed to be non-deep complex or intermediate complex type of morphophysiological dormancy, and embryo dormancy was broken by wet-chilling for 10 weeks. After 10 weeks of wet-chilling treatment, seed germination began. Germination percentage was higher in dark condition raher than light condition and recorded the maximum at 25℃ in the dark (16.3%). A pre-soaking treatment with a combined plant growth hormones promoted germination and shortened T₅₀. Specifically, seed germination of 84.5% was achieved by pre-soaking of seeds with a combined solution of 500 ㎎/L GA₃ and 10 ㎎/L kinetin for 24 h after a wet-chilling treatment for 10 weeks. Thus the effect of plant growth hormones coupled with chilling temperature on seed breaking dormancy provide asubsequent growth of seedlings for successful plantation.

• Korean Journal of Food Science and Technology
• /
• v.34 no.5
• /
• pp.842-845
• /
• 2002

Physicochemical properties and water uptake rate of pigmented rice were determined. The median and mean particle sizes of pigmented rice flour were 15.18 and $38.53\;{\mu}m$, whereas brown rice flour were 11.46 and $33.41\;{\mu}m$, respectively. Water-binding capacity, swelling power, and solubility of pigmented rice flour were higher than those of brown rice flour. X-ray diffraction patterns showed traditional A type of cereals. Moisture gain of pigmented rice kernels increased continuously up to 60 min at soaking temperature $(20{\sim}25^{\circ}C)$. Water uptake rate constants of pigmented rice during soaking at $20{\sim}25^{\circ}C$ also increased.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.470-474
• /
• 2011

Rice straw is the main grain straw and is produced in large quantities every year in Korea. Pretreatment of lignocellulosic biomass using soaking process was carried out mild conditions at atmospheric pressure and temperature of $60^{\circ}C$. We found enzymatic hydrolysis condition of pretreated biomass. In case of a rice straw, compared with previous lignocellulosic biomass, we found that hydrolysis time was a shorter than others. Hydrolysis of SAA-treated rice straw has shown conversion rate was higher at $50^{\circ}C$. Hydrolysis was ended between 40~48 hour. Glucose conversion rate was higher when enzyme loading is 65 FPU/ml and 32 CbU/ml. When substrate concentration was 5%(w/v), it was that conversion rate was 83.8% after hydrolysis for 72 hr. In simultaneous saccharification and fermentation(SSF) experiment about SAA-treated rice straw, ethanol productive yield was highest from $40^{\circ}C$. The yield of that time was 33.05% from 48 hour.

• Journal of the Korean Ceramic Society
• /
• v.44 no.7
• /
• pp.343-348
• /
• 2007

Alumina/silver nanocomposites were fabricated using a soaking method through a sol-gel route to construct an intra-type nanostructure. The pulse electric-current sintering (PECS) technique was used to sinter the nanocomposites. Several specimens were annealed after sintering. The microstructure, mechanical properties, critical frontal process zone (FPZ) size, and thermo-mechanical properties of the nanocomposites were estimated. The relative densities of the specimens sintered at 1350 and $1450^{\circ}C$ were 95% and 99%, respectively. The maximum value of the three-point bending strength was found to be 780 MPa for the $2{\times}2{\times}10 mm$ specimen sintered at $1350^{\circ}C$. The fracture toughness of the specimen sintered at $1350^{\circ}C$ was measured to be $3.60 MPa{\cdot}m^{1/2}$ using the single-edge V-notched beam (SEVNB) technique. The fracture mode of the nanocomposites was transgranular, in contrast to the intergranular mode of monolithic alumina. The fracture morphology suggested that dislocations were generated around the silver nanoparticles dispersed within the alumina matrix. The specimens sintered at $1350^{\circ}C$ were annealed at $800^{\circ}C$ for 5 min, following which the maximum fracture strength became 810 MPa and the fracture toughness improved to $4.21 MPam^{1/2}$. The critical FPZ size was the largest for the specimen annealed at $800^{\circ}C$ for 5 min. Thermal conductivity of the alumina/silver nanocomposites sintered at $1350^{\circ}C$ was 38 W/mK at room temperature, which was higher than the value obtained with the law of mixture.

• Food Engineering Progress
• /
• v.13 no.1
• /
• pp.24-31
• /
• 2009

The structural and physicochemical properties of dried aloe vera gel by DIS (dewatering impregnation soaking) process under optimum conditions were investigated. FT-IR spectra for dried samples of DIS aloes showed the typical patterns of standard aloe polysaccharide, and surface structures by SEM (scanning electron microscopy) were similar to a gel-like structure. In case of physicochemical properties of dried aloe samples by DIS process, solubilities and swelling powers of control (not osmotic treated aloe), DIS (S) and DIS (G), samples treated by osmotic solution of 60% sucrose/0.25% NaCl and 50% glucose/0.5% NaCl, were 48.3-57.3% and 8.3-11.7%, respectively, showing no significant differences among samples, but swelling power of DIS (PEG), sample treated by using 50% polyethylene glycol as an osmotic agent was about 5 times higher that of control. Also, water holding capacities of control, DIS (S) and DIS (G) were similar to each other, but that of DIS (PEG) was about 5 times higher that of control. Oil holding capacities of control and DIS aloes maintained the 50.9-86.4% levels of water holding capacities showing no significant differences among samples. Rehydration ratio of DIS (PEG) aloes were significantly dependent on the temperature of rehydrated solvent (water), and rehydration ratio of not-fileted aloe was about two folds higher than that of fileted aloe.

• Journal of Korean Society of Forest Science
• /
• v.56 no.1
• /
• pp.1-25
• /
• 1982

Plywood used for construction as a decorative inner material is inflammable and can cause fire accidents. causing destruction of human life and property. To diminish the fire disaster, fire retardant plywood is indeed required. In the methods of manufacturing the fire retardant plywood, a soaking method is occasionally used. However after soaking plywood into fire retardant chemical solutions redrying of soaked plywood is of the utmost importance. In this study 3.5mm and 5.0mm thickness plywoods were selected for fire retardant treatment. Treating solutions were prepared for 20% dilute solutions of ammonium sulfate, monoammonium phosphate, diammonium phosphate, borax-boric acid minalith, and water solution, 1-, 3-, 6-, and 9 hour-soaking treatments in borax-boric acid and minalith, and 6- and 9 hours in the other chemicals were applied and after the treatment hot drying was applied to treated plywoods at $90^{\circ}C$, $120^{\circ}C$ and $150^{\circ}C$ of press temperature. Drying rates, drying curves, water absorption rates of fire retardant chemicals, weight per volume and fire retardant degree of plywood were investigated. The results may be summarized as follows: 1) In the 9 hours-soaking treatment of fire retardants by hot and cold bath method, the chemical retentions of 3.5mm thickness plywood could be attained within the range ($1.125-2.25kg/(30cm)^3$) of minimum retention specification as follows: $1.353kg/(30cm)^3$ in monoammonium phosphate, $1.331kg/(30cm)^3$ in diammonium phosphate, $1.263kg/(30cm)^3$ in ammonium sulfate, $1.226kg/(30cm)^3$ in borax-boric acid. But the chemical retention, $0.906kg/(30cm)^3$, in minalith could not be attained within the range of minimum retention specification. And also in case of 5.0mm thickness plywood, chemical retentions, as $1.356kg/(30cm)^3$ and $1.166kg/(30cm)^3$ respectively, of ammonium sulfate and diammonium phosphate could be attained within the range minimum retention specification, but the other fire retardant chemicals could not. 2) In the 6- and - hours-soaking treatments of 3.5mm and 5.0mm thickness plywood, the drying curve sloped of chemical treated plywood was smaller than that of water treated. The drying rate related to thickness of treated plywood, was about three times as fast in 3.5mm thickness plywood compared with 5.0mm thickness plywood. 3) In the treatment at $120^{\circ}C$ of hot platen temperature, the drying rates of chemical-treated plywood showed the highest quantity in diammonium phosphate of 3.5mm and 5.0mm thickness plywood. But the drying rate of water treated plywood was highest during the 6- and 9 hours-soaking treatments. 4) The drying rate remarkably increased with proportion to increase of the platen temperature, and the values were respectively 1.23%/min., 6.54%/min., 25.75%/min. in hot platen temperature of $90^{\circ}C$, $120^{\circ}C$, $150^{\circ}C$ in 3.5mm thickness plywood and 0.55%.min., 2.49%/min., 8.19%/min. in hot platen temperature of $90^{\circ}C$, $120^{\circ}C$, $150^{\circ}C$ in 5.0mm thickness plywood. 5) In the fire retardant degree of chemical treated plywood, the loss in weight was the smallest in diammonium phosphate, next was in monoammonium phosphate and ammonium sulfate, and the greatest was in borax-boric acid and minalith. And the fire-retardant effect in burning time, flame-exhausted time and carbonized area were greatest in diammouniun phosphate, next were in monoammonium phosphate and ammonium sulfate, and the weakest were in borax-boric acid and minalith.

• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.807-813
• /
• 2014

The Ag-impregnated activated carbon was produced from bamboo activated carbon by soaking method of silver nitrate solution. The carbonization and activation of raw material was conducted at $900^{\circ}C$. Soaking conditions are the variation of silver nitrate solution concentration (0.002~0.1 mol/L) and soaking time (maximum 24 h). The specific surface area and pore size distribution of the prepared activated carbons were measured. Also, NO and activated carbon reaction were conducted in a thermogravimetric analyzer in order to use for de-NOx agents of used activated carbon. Carbon-NO reactions were carried out with respect to reaction temperature ($20{\sim}850^{\circ}C$) and NO gas partial pressure (0.1~1.8 kPa). As results, Ag amounts are saturated within 2h, Ag amounts increased 1.95 mg Ag/g (0.2%)~ 88.70 mg Ag/g (8.87%) with the concentration of silver nitrate solution in the range of 0.002~0.1 mol/L. The specific volume and surface area of bamboo activated carbon of impregnated with 0.2% silver were maximum, but decreased with increasing Ag amounts of activated carbon due to pore blocking. In NO reaction, the reaction rate of impregnated bamboo activated carbon was retarded as compare with that of bamboo activated carbon. Measured reaction orders of NO concentration and activation energy were 0.63[BA], 0.69l[BA(Ag)] and 80.5 kJ/mol[BA], 66.4 kJ/mol[BA(Ag)], respectively.

• Journal of Life Science
• /
• v.16 no.2 s.75
• /
• pp.352-356
• /
• 2006

Quantity of protein, amino acid, and sugar leaked from seeds was greater as the viability of seeds was dropped by the time elapsed of seed aging treatment. In the seeds with the artificial aging treatment for 20 days, 35.8 mg of protein was leaked on the 4th day after soaking, which was 6.9 times higher than that of control. Leakage of amino acid was also higher from low quality seeds treated with the aging treatment. In the seeds with the aging treatment for 20 days, $36.5{\mu}g$ fig of sugar was leaked on the 4th day after soaking, which was 2.8 times higher than that of control. The leakage of inorganic compound was higher from the low quality seeds, and leakage of total protein, amino acid, and sugar. According to .the quantity of leakage, water soluble compounds, which can be used for the assessment of seed quality without any destruction, were protein and potassium. Germination rate and percentage of seeds were dropped with the seed aging treatment, and the seed viability could be recovered by priming treatment. This phenomenon was very clear when the low quality seeds were germinated at low temperature.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.2
• /
• pp.103-111
• /
• 1979

For the effective utilization of the coastal fish resources in Korea, an investigation on the optimum processing conditions and the quality of a textured fish protein concentrate similar to the texture of animal meat has been carried out with the fish meat of Alaska pollack and mackerel. A noodle shaped product was prepared with the fish meat paste after the adjustment of pH and salt content. The product was soaked in $96\%$ ethyl alcohol to produce textured fish protein concentrate and then dried. The processing conditions were estimated with the rehydration capacity of the textured fish protein concentrate(FFC). The quality of the final product was evaluated with chemical composition, sensory test and texture measurement. The optimum pH and salt content of the fish meat for the processing of meaty textured FPC were 7.5 and $1.0\%$ respectively. The most effective soaking conditions were as follows:soaking time, 40 min. ; temperature of alcohol, 5 to $20^{\circ}C$;amount of alcohol, 4 times the weight of tile fish meat paste, number of soaking in alcohol, 4 times. The alcohol remaining in meaty textured FPC could be removed effectively by forced air drying. The yield and the contents of protein and lipid in the meaty textured FPC from Alaska pollack were $19.9\%\;84.3\%\;and\;0.5\%$ and those from mackerel were $29.8\%,\;78.1\%\;and\;3.6\%$ respectively. The content of essential amino acid in the meaty textured FPC from Alaska pollack and mackerel was not inferior to that of beef, textured soybean protein and FAO pattern. Beef meat can be substituted with the meaty textured FPC up to $50\%$ in processing meat balls withoutanysignificantlossinthetaste, ordor and texture.