• Journal of ILASS-Korea
• /
• v.5 no.3
• /
• pp.9-16
• /
• 2000

In a SI engine, three-way catalyst converter has the best efficiency when A/F ratio is near the stoichiometry. The feedback control using oxygen sensors in the commercial engine has limits caused by the system delays. So it is necessary to control fuel quantity in accordance with intake air amount in order to reduce exhaust emission and improve the specific fuel consumption. Precise A/F ratio control requires measurement of air amount with respect to the cylinder and injection fuel according to the air amount In this paper, we applied nonlinear fuel injection model and developed the algorithm of A/F ratio control. This algorithm includes the methods of measurement of transient air mass flowing into each cylinder, of calculation of injection pulse width for measured air mass, and the method of feedback and engine control by using lambda sensor. Also we developed control program for IBM-PC by using C++ Builder, and tested it in the commercial engine.

• Journal of information and communication convergence engineering
• /
• v.11 no.4
• /
• pp.253-257
• /
• 2013

Mobile computers can process large amounts of data at high speeds, and it is feasible and easy to implement a remote monitoring system utilizing mobile computers. Because of their portability and convenience, these computers have been employed in various research areas to develop such monitoring systems. Existing monitoring system is a bit difficult to real time monitoring the scattered offshore facilities. So this paper compensate the existing system by using mobile computers such as a tablet PC-based monitoring system. Also, the scattered offshore facilities can be monitored in real-time through the tablet PC. The developed monitoring system is a fully Internet-based monitoring platform that enables one to monitor and control remote oceanic applications at any time and any place where it is possible to access the Internet. It can be applied to many oceanic applications as well as the unmanned systems and remote monitoring systems on land.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.136-138
• /
• 2016

본 프로그램은 기존 PC 원격제어 프로그램들이 갖고 있는 기능의 문제점, 비효율성, 사용의 불편함, 보안 위험 등의 결함을 보완하여 보다 편리하고 효율적이며 실용적인 작업환경을 제공하는데 목적이 있다. 따라서 기존 프로그램들의 기능과 특징을 분석하고 결함을 파악하여 해결방안을 제시하고 이를 고려한 프로그램을 설계하여 개발함으로써 누구나 PC 원격제어라는 편리함과 효율적인 작업환경이라는 기대효과를 예상해 보았다.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2298-2303
• /
• 2008

The increasing demands for the recently released CPU which has had higher heat density, the confined space of desktop PCs, and so on are the main drive for continuously improving PC cooling systems. In order to meet number of demands, this paper describes the flow and thermal behavior of the heat sink combined with heat pipes, and a fan through the numerical analysis by using the computational fluid dynamics(CFD) code and discusses how to extend the cooling capability.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.601-604
• /
• 2008

Desktop PC CPUs have been significantly required to be the necessity of thermal management while they have satisfied the extensive data and graphic processing requirements. So the cooling systems assembled with heat pipes embedded in a metal cooling plate, and fins are widely used in the desktop PC markets. Due to a number of demands such as the confined space of desktop PCs, higher heat density of CPUs, and acoustic noise, however, there is the main drive to improve continuously cooling systems. This paper presents the flow and thermal behavior of the cooling system by using the computational fluid dynamics(CFD) code.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.653-656
• /
• 2005

Maglev straight track composes of guide rail, back iron, power rail and girder. Above all, girder is important. So this study analyzes the influence of PC girder and steel girder on stress analysis fur Maglev straight track, and to study the stress analysis the finite element method is utilized.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.148-149
• /
• 2022

The use of high-strength grout applied for facility foundations and bridges has recently been expanding in offshore wind farm. Wind farm in offshore require bearing capacity for horizontal loads such as wind, waves, and earthquakes. In order to improve the bearing force of the base part, sufficient fluidity and a certain strength should be ensured so that the high-strength grout is densely charged in the narrow space of the connection part. Therefore, in this study, changes in fluidity and strength according to the ratio of PC-based superplasticizer mixed in high-strength grout were measured. As a result, as the ratio of the superplasticizer increased, fluidity increased and strength decreased. However, the strength did not decrease when the ratio of superplasticizer was above a 0.005. Therefore, it was confirmed that the fluidity change was remarkable when a 0.005 ratio of PC-based superplasticizer were added.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.22 no.6
• /
• pp.1500-1508
• /
• 2008

The author investigated whether Chwiyeon-tang(PC), Haengso-tang(PH), Jawanchihyo-san(PJ) and Gamisocheongryong-tang(PS) significantly affect both PMA-induced mucin production and MUC5AC gene expression in airway epithelial cells and sulfur-dioxide-induced airway goblet cell hyperplasia and mucus hypersecretion animal model using rat. Possible cytotoxicity of each herbal medicine was assessed by measuring the survival and proliferation rate of NCI-H292 cells. Confluent NCI-H292 cells were pretreated for 30 min in the presence of PC, PH, PJ and PS, respectively, and treated with PMA(10 $ng/m{\ell}$), to assess the effect of each herbal medicine on PMA-induced mucin production by enzyme-linked immunosorbent assay(ELISA). Effects of each herbal medicine on PMA-induced MUC5AC gene expression from the same cells were investigated. Also, hypersecretion of airway mucus and goblet cell hyperplasia were induced by exposure of rats to $SO_2$ during 3 weeks. Effects of orally-administered PC, PH, PJ and PS during 1 week on intraepithelial mucosubstances and hyperplasia of goblet cells were examined using histological analysis after staining the epithelial tissue with PAS-alcian blue. (1) PC, PJ, PS and PH did not show significant effects on the survival and proliferation of NCI-H292 cells ; (2) PC, PJ and PS significantly decreased PMA-induced mucin production from NCI-H292 cells ; (3) PC, PJ and PS significantly inhibit the expression levels of PMA-induced MUC5AC gene in NCI-H292 cells ; (4) Among PC, PJ, PS and PH, only PS decreased $SO_2$-induced hyperplasia of airway goblet cells and intraepithelial mucosubstances. This result suggests that PC, PJ and PS can not only affect the production of mucin but also affect the expression of mucin gene and this can explain, at least in part, the traditional use of PC, PJ and PS for controlling airway diseases showing hypersecretion of mucus in oriental medicine.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.6
• /
• pp.131-138
• /
• 2014

The steel structure fabrication plant certification program was enacted as a part of the construction technology management act, article 24-3, to improve the quality of steel construction after the decay falling accident of Seongsu Bridge in 1994. However, the national certification program for structural precast concrete that is a prefabricated construction products produced by casting concrete in plant is not implemented yet. So, to introduce the proper certification system for precast concrete, the quality certification programs of North America, Europe and Japan are surveyed. In North America, the organizations that manage the plant certification programs are PCI, NPCA, CPCI and so on. Sales of precast concrete elements in Europe are governed by the construction products regulation 305/2011. Therefore, CE marking is mandatory from July 2013 for all construction products including precast concrete. In Japan, precast concrete products used in civil engineering are certificated by JIS mark, product certification system and plants for manufacturing precast concrete building elements are audited by Japan Prefabricated Construction Suppliers and Manufacturers Association. Based on these survey studies, in this paper is described an adaptation of precast concrete plant certification to comport with the certification system in Korea.

• Smart Media Journal
• /
• v.1 no.1
• /
• pp.1-9
• /
• 2012

This Paper proposes an effective SoC hardware architecture implementing a VDP for Full HD TVs. The proposed architecture makes real time video processing possible with supporting efficient bus architecture and flexible interface. Video IP cores in the VDP are designed to provide a high quality of improved image enhancement function. The Avalon interface is adopted to guarantee real-time capability to IPs as well as SoC integration. This leads to reduced design time and also enhanced designer's convenience due to the easiness in IP addition, deletion, and revision for IP verification and SoC integration. The embedded software makes it possible to implement flexible real-time system by controlling setting parameter details and data transmitting schemes in real-time. The proposed VDP SoC design is implemented on Cyclon III SoPC platform. The experimental results show that our proposed architecture of the VDP SoC successfully provides required quality of Video image by converting SD level input to Full HD level image.