• Journal of Environmental Impact Assessment
• /
• v.32 no.6
• /
• pp.437-449
• /
• 2023

This study measured PM₁₀ concentrations and wind speeds in buffer green spaces and neighborhood parks located along the road, and compared them with roadside measurementresults to understand the effect of mitigating PM₁₀ concentrations by type of green space and the influence of wind speeds on it. As a result of the analysis, the effect of mitigating PM₁₀ concentration was different depending on the type of roadside green space, and an increase in wind speed had a significant effect on reducing PM₁₀ concentration. In buffer green areas with high planting density, wind speed was low and PM₁₀ stagnated inside, resulting in the highest concentration. On the other hand, green areas in neighborhood parks with relatively low planting density had high wind speeds and the lowest PM₁₀ concentration. The non-green area within the neighborhood park recorded the highest wind speed, which was advantageous for the spread of PM₁₀, but the concentration was higherthan that of the green area. Therefore, in orderto reduce PM₁₀ concentration in roadside green space, it is necessary to create green space with good ventilation, and the combined effect of green space and wind speed seems to be more advantageous in reducing PM₁₀ concentration. Green spaces capture and remove PM inside, contributing to reducing the concentration of PM outside. In order to manage PM in the entire city and on roads, it is necessary to increase planting density and leaf area in roadside green spaces, such as buffer green spaces, so that PM can be removed within the green spaces. However, in green spaces such as neighborhood parks that are actively used by city residents, in orderto minimize damage to users due to PM, it is desirable to create green spaces with a structure that allows PM to spread to the outside rather than stagnate inside.

• Journal of Food Hygiene and Safety
• /
• v.38 no.6
• /
• pp.544-550
• /
• 2023

To develop a functional probiotic that inhibits gingipain, a major virulence factor of Porphyromonas gingivlais (P. gingivalis), we screened over 30 probiotic strains for their ability to inhibit gingipian activity. We investigated the inhibition of expression of gingipain genes kgp, rgpA, and rgpB as well as gingipain activity, using freeze dried cell-free supernatants of Weisiella cibaria SPM402 (WC402) and Lactobacillus paracasei SMP412 (LP412), both of which demonstrated antibacterial activity against P. gingivalis. Thus, it was verified that kgp expression was reduced by approximately 0.71±0.02 folds and rgpB expression was reduced by approximately 0.71±0.14 folds at a concentration of WC402 10 mg/mL. Meanwhile, at the same concentration of 10 mg/mL of LP412, kgp expression was reduced by approximately 0.19±0.08 folds, rgpA expression was reduced by approximately 0.09±0.02 folds, and rgpB expression was reduced by approximately 0.24±0.03 folds. At a concentration of 10 mg/mL, Kgp activity was inhibited by approximately 78.65±3.58% (cell associated gingipain, CAG), 82.45±1.22% (cell-free gingipain, CFG) by WC402 and 80.71±2.11% (CAG), and 85.81±0.05% (CFG) by LP412 respectively. Rgp activity was also effectively inhibited by approximately 78.6±1.01% (CAG), 86.78±0.47% (CFG) and 82.93±1.26% (CAG), 88.81±0.36% (CFG) by WC402 and LP412 respectively. Based on these results, W. cibaria SPM402 and L. paracasei SPM412 can be regarded as functional probiotics with the ability to inhibit gingipain activity and exhibit antibacterial effects against P. gingivalis.

• Economic and Environmental Geology
• /
• v.56 no.6
• /
• pp.661-674
• /
• 2023

From the seafloor of Taean, Chungcheongnamdo Province, a ship of the Joseon Dynasty was discovered for the first time in the history of underwater excavations in Korea in 2014 and was named Mado Shipwreck No. 4. A total of 27 unused whetstones loaded as tribute were discovered on the hull of Mado No. 4, which revealed that Mado Shipwreck No. 4 was a Grain transport ship that sank while carrying tribute from Naju to Hanyang between 1417 and 1425 (King Taejong to King Sejong). All of the 27 whetstones are in the shape of narrow and long sticks. The average values of length, width, thickness, and weight are 161.5 mm, 36.1 mm, 22.7 mm, and 253.2 g, respectively. The result of X-ray diffraction analysis shows that the constituent minerals are quartz, alkali feldspar, and plagioclase, which is similar to that of the high-resolution digital stereomicroscope analysis. The average porosity of Mado-2672 and 2673 is 2.69% and 1.78%, respectively, and the average surface hardness is 807.2HLD and 834.5HLD, respectively. It is interpreted that if the porosity increases beyond a certain level, it affects the decrease in surface hardness. All of these are made of feldspathic sandstones with an average SiO₂ content of 74.51% and were confirmed to be suitable as grindstones. They are all medium whetstones when classified based on the SiO₂ content. These whetstones are small in size and weight and are convenient to carry, so they are presumed to be a type of non-stationary whetstone, and are estimated to have been mainly used in the fields such as weapon polishing and craft production during the Joseon Dynasty.

• Journal of Food Hygiene and Safety
• /
• v.38 no.6
• /
• pp.449-456
• /
• 2023

In this study, we developed Rapid Enrichment Broth for Vibrio parahaemolyticus (REB-V), a broth capable enriching V. parahaemolyticus from 10⁰ CFU/mL to 10⁶ CFU/mL within 6 hours, which greatly facilitates the rapid detection of V. parahaemolyticus. Using a modified Gompertz model and response surface methodology, we optimized supplement sources to rapidly enrich V. parahaemolyticus. The addition of 0.003 g/10 mL of D-(+)-mannose, 0.002 g/10 mL of L-valine, and 0.002 g/10 mL of magnesium sulfate to 2% (w/v) NaCl BPW was the most effective combination of V. parahaemolyticus enrichment. Optimal V. parahaemolyticus culture conditions using REB-V were at pH 7.84 and 37℃. To confirm REB-V culture efficiency compared to 2% (w/v) NaCl BPW, we assessed the amount of enrichment achieved in 7 hours in each medium and extracted DNA samples from each culture every hour. Real-time PCR was performed using the extracted DNA to verify the applicability of this REB-V culture method to molecular diagnosis. V. parahaemolyticus was enriched to 5.452±0.151 Log CFU/mL in 2% (w/v) NaCl BPW in 7 hours, while in REB-V, it reached 7.831±0.323 Log CFU/mL. This confirmed that REB-V enriched V. parahaemolyticus to more than 10⁶ CFU/mL within 6 hours. The enrichment rate of REB-V was faster than that of 2% (w/v) NaCl BPW, and the amount of enrichment within the same time was greater than that of 2% (w/v) NaCl BPW, indicating that REB-V exhibits excellent enrichment efficiency.

• Journal of Life Science
• /
• v.33 no.10
• /
• pp.797-807
• /
• 2023

To improve the functionality of mulberry, samples were fermented with Lactobacillus plantarum JCM 1149 (LP) or Pichia kudriavzevii Atz-EN-01 (PK), and their antioxidant and anti-obesity activities were compared to those of unfermented mulberry. After fermenting for 60 hr, the total polyphenol and flavonoid content of the PK-fermented mulberry (PKFM) and LP-fermented mulberry (LPFM) was 1.5-fold and 2-fold higher, respectively, while the total anthocyanin content was 1.3-fold and 1.5-fold higher in the PKFM and LPFM, respectively. DPPH radical scavenging activity was found to be 16.3% higher (86% vs. 100%) after PK fermentation and 8.1% higher (86% vs. 93%) after LP fermentation. The lipase inhibitory activity of the LPFM and PKFM was 62.9% and 52.5%, respectively. 3T3-L1 preadipocytes were treated with unfermented mulberry, LPFM, or PKFM at 200, 400, or 800 ㎍/ml and stained with oil-red-O. A slight difference in the staining was observed in samples treated with 400 ㎍/ml. However, treatment with 800 ㎍/ml significantly reduced staining compared to the control, and the LPFM exhibited relatively higher adipogenesis inhibitory activity than the PKFM. Blood triglyceride content increased by 9.5% in the high-fat diet group, but decreased by 17.1% in the control group, 37.1% in the LPFM group, and 41.6% in the PKFM group. The blood triglyceride content of the LPFM group decreased by 43.1% and 21.4% compared to the high-fat diet group and the control group, respectively, and that of the PKFM group decreased by 48.6% and 28.9% compared to the same groups. In conclusion, the results indicate that fermented mulberry has increased antioxidant activity, lipase inhibitory activity, and adipogenesis inhibition activity, and decreased blood triglyceride content compared to unfermented mulberry.

• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.827-833
• /
• 2023

CT(Computed Tomography) contrast agents are commonly used in general hospitals and university hospitals when taking radiographic examinations. The CT contrast medium contains a mixture of a substance called "Iodine", which absorbs radiation energy and makes it appear white in the CT image, further improving the image quality. In addition, the CT contrast agent, which moves like blood in the blood vessels, clearly differentiates it from muscle and water, so CT contrast agents are widely used in hospitals. These CT contrast agents absorb X-rays, but in order to absorb X-rays, they must have a high density or a high radiation absorption coefficient. Since the CT contrast agent is injected into the blood vessels, if the density is high, the blood vessels are strained and the patient is in shock. For this reason, it is necessary to match the density similar to that of water and always pay attention to side effects. In addition, the amount of CT contrast medium is adjusted according to the patient's body shape, and the remaining contrast medium is discarded. However, This study tried to find out the idea of recycling it as a radiation shielding material. Since the CT contrast medium has a high radiation absorption coefficient at a density similar to that of water, the amount to absorb radiation is adjusted, the amount of contrast medium and the amount of water are adjusted, and the amount of radiation absorbed is determined by mixing with water. In addition, a study was conducted to find out the result of the difference in radiation absorption in various ways by comparing the radiation quality coefficient and absorption coefficient with other substances or materials in an environmentally friendly method harmless to the human body by mixing CT contrast medium and water.

• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.903-909
• /
• 2023

The purpose of this study is to compare and analyze the effect of changes in the patient's central position on the exposure dose and image quality of surrounding organs during a chest lateral examination using an Auto Exposure Control(AEC). The experiment was conducted on a human body phantom. A needle was attached to the lower part of the center of the coronal plane of the phantom, and a lead ruler was attached to the lower part of the detector so that the 50 cm point was located at the lower center of the AEC ion chamber. The exposure conditions were 125 kVp, 320 mA, the distance between the source and the image receptor was 180 cm, and the exposure field size was 14 × 17 inches. Only one AEC ion chamber was used at the bottom center, and the density was set to '0' and sensitivity to 'Middle', and the central X-ray was incident vertically toward the 6th thoracic vertebra. With AEC mode applied, the 50 cm point of the needle and lead ruler were aligned and the phantom was moved 5 cm toward the stomach (F5) and 5 cm toward the back (B5), and the dose factor was analyzed by measuring ESD. The ESD of the thyroid gland according to the change in patient center position was 232.60±2.20 μGy for Center, 231.22±1.53 μGy for F5, and 184.37±1.19 μGy for B5, and the ESD of the breast was 288.54±3.03 μGy for Center, F5 was 260.97±1.93 μGy, B5 was 229.80±1.62 μGy, and the ESD of the center of the lung was 337.02±3.25 μGy for Center, F5 was 336.09±2.29 μGy, and B5 was 261.76±1.68 μGy. As a result of comparing the average values of dose factors between each group, the difference in average values was statistically significant (p<0.01), and each group appeared to be independent. As a result of the study, there was no significant difference in the dose to the thyroid, breast, and center of the lung according to the change in the patient's central position, except for the breast (10%) when the patient moved forward about 5 cm. However, movement of about 5 cm posteriorly resulted in an average dose reduction of 23.7%. Additionally, when the patient's central position was moved to the rear, image quality deteriorated.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.192-214
• /
• 2023

Wooden architectural cultural heritages are one of the visible legacies that show the national's identity. Even when the concept of 'the original' of cultural heritages was not accurately understood, the emphasis of preservation and management of cultural heritages was placed on 'preservation of the original form' or 'maintenance of the original form'. Moreover, these days, following the trend of international preservation principles, cultural heritages are considered important as "values as historical objects." This paper is the result of an attempt to determine the scope and content of what parts should be monitored to maintain the original form of wooden architectural cultural heritage. The first thing to be done in monitoring wooden architectural cultural heritage is to check the condition of the ground and foundation. The second is the column. This is because the instability of the column causes damage to the joint with each member and the fitting part, resulting in physical changes leading to damage to the wall. The third is monitor the roof tiles. If the leak continues into the building due to the separation or damage of the roof, the defect should be partially dismantled and repaired, so it should be monitored to maintain its original shape as much as possible. The monitoring range of the base, column, and roof serves as a reference point for identifying what damage is being done to the relevant cultural heritages. In other words, the data at the time when monitoring began becomes the 'original' for the year. Alternatives based on the analysis of monitoring for the preservation of original cultural heritages should be actively introduced. In addition, by sharing the current state and situation of cultural heritages as a result of monitoring with various related organizations, preventive preservation should be established rather than preservation of cultural heritages by "intervention."

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.110-130
• /
• 2023

New years' rites serve a religious function to wish for well-being during the year by bidding farewell to the previous year and welcoming the next. In Japan, in mid-December, to welcome Toshigami, kadomatsu, and shimenawagazari are prepared, as well as osechi ryori to be eaten at the beginning of the year. On New Year's Day, people go to shrines and bow to the gods while saying Hatsumode (初詣). On the fifteenth day of the first month, in the course of a rite called Dondoyaki, all the decorations used in the first month and the amulet used in the previous year are burned. In Korea, when the Lunar New Year approaches, people prepare for their ancestral rites and clean their houses. On the first day of the new year, people hold ancestral rites for their ancestors. There are many different seasonal rites, taking place from the beginning of the year to the full moon. In China, Danwonban (團圓飯), in which the whole family sits together and eats on New Year's Eve, is important. Lights are brightly lit up all night, and the sound of firecrackers outside rings out loudly. On the door, the word chun-ryun is attached to wish for prosperity in the new year. According to the cycle of the four seasons, the first lunar month contains a high proportion of the seasonal rites that are repeated every year. The first month represents the beginning of a year, and various rituals are performed in order to wish for good health and abundance during the coming year. In addition, the "folk religious world view" is integral to annual new years' rites, so it is not difficult to understand the religious character and structure of the Korean, Chinese, and Japanese annual ceremonies. This study examines the current status of annual new years' rites in Korea, China, and Japan, and how the rites are structured according to the inflection points in the year. In addition, religious characteristics are reviewed in terms of gods, predictions, and fertility prayers, exorcisms, health, and restoration. In this way, it can be seen that various religious elements such as shamanism, agricultural faith, ancestor worship, Shintoism, Taoism, Confucianism, and Buddhism can be witnessed in the annual new years' rites of Korea, China, and Japan. In addition, differences in the presence or absence of these are shown to depend on the country.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.40-52
• /
• 2023

The basic purpose of building material called tiles is waterproofing and damp proofing, and they were restricted to use on important buildings to symbolize authority. This is especially true during the Three Kingdoms period, although unearthed examples are rare. Most of these tiles are found in ruins in the Silla and Baekje regions. Tiles were excavated from the Buwon-dong ruins that show the oldest manufacturing technique in the Gaya region to date, and tiles from the early Three Kingdoms period were recently excavated from the Gimhae Bonghwang-dong ruins, which is presumed to be the site of the royal palace of Geumgwan Gaya. These are important materials that show the appearance of tiles from the early days of Gimhae, the ancient capital of Geumgwan Gaya. The tiles excavated from the Bonghwang-dong ruins are reddish-yellow because a small amount of sand was mixed in the tile material and baked at a low temperature. The tiles are thin, no traces of fabric were identified, but traces of clay bands were identified. Tapping tool marks and traces of an anvil used in pottery production are clearly observed on the inside and outside, indicating that the tiles were made in the same way as earthenware manufacturing methods. If this is connected to the genealogy of the potters who made Gaya earthenware, it is estimated that tiles and earthenware were produced together as in the Songrim-ri ruins in Bulo-dong, Incheon, Songgok-dong ruins in Gyeongju, and Mulcheon-ri ruins. To date, tiles excavated from the Gimhae area have been identified only in places believed to be the Geumgwan Gaya City Wall (Royal Palace) in the Gimhae Basin. Considering what has been recorded so far and the geographical scenery, the Bonghwang-dong remains are the only city wall candidate site, and this is clearly revealed through the existence of the excavated tiles, which proves this. Considering that a small number of tiles were excavated during this time, it is estimated that the role of tiles as a luxury product with a symbolic meaning was greater than that of roofing materials, and there were strict restrictions and controls on its use.