• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.897-907
• /
• 1991

This study was conducted to research the formation and the color development of CoO-ZnO-Fe2O3-TiO2-SnO2 system for the purpose of synthesizing the spinel pigments which are stable at high temperature. After preparing CoO-ZnO-Fe2O3, in which CoO causes the color, as a basic composition, $\chi$CoO.(1-$\chi$)ZnO.Fe2O3 system, $\chi$CoO.(1-$\chi$)ZnO.TiO2 system and $\chi$CoO.(1-$\chi$)ZnO.SnO2 system were prepared with $\chi$=0, 0.2, 0.5, 0.7, 1.0 mole ratio respectively. The manufacturing was carried out at 128$0^{\circ}C$ for 90 minutes. These specimens were analyzed by the reflectance measurement and the X-ray diffraction analysis and the results were summarized as follows: 1. All of the specimens formed the spinel structure and were colored with stable yellow or blue. 2. As the content of CoO and Fe2O3 in the specimens being increased, the reflectance of each specimen was measured becoming lower and the colors were changed from yellow to greyish blue and from blue to dark blue. 3. As the substituting amount of Co2+ ion for Zn2+ ion in $\chi$CoO-ZnO-TiO2-SnO2 system being increased, the colors were changed from blue to greyish blue. The colors were changed from yellow to grayish green owing to the tetrahedral Co2+ ions being increased, the octahedral Co2+ ions being decreased with increasing the amount of Sn4+ ions. 4. CoO-ZnO-Fe2O3-TiO2-SnO2 system, in which Zn2+ was substituted with Co2+ and Fe3+ was substituted with Ti4+ and Sn4+, easily formed the spinel structure without regard to the amount of substitution or the ion owing to the selectivity of the coordination number: 4 of Zn2+, 4 of Co2+, 6 of Fe3+ or 6 of Ti4+ and Sn4+.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.75.2-75.2
• /
• 2007

• 한국세라믹학회지
• /
• 제36권5호
• /
• pp.564-569
• /
• 1999

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1455-1458
• /
• 1997

In order to promote CO gas sensitivity, $SnO_2$ added ZnO prepared. The electrical conductivities and dielectric constants decreased by increasing $SnO_2$ content in air. The electrical conductivities in 1000ppm CO atmosphere were larger than in dry air. The measured CO sensitivities were $1{\sim}15.2$ at $100^{\circ}C{\sim}480^{\circ}C$. The maximum CO sensitivity of 15mol% $SnO_2$ added ZnO was 15.2 at $305^{\circ}C$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.175.1-175.1
• /
• 2015

CuSn thin films were deposited by rf magnetron co-sputtering method with pure Cu and Sn metal targets with a variety of rf powers. CuSn thin films were studied with a surface profiler (alpha step), X-ray photoelectron spectroscopy (XPS), X-ray induced Auger electron spectroscopy (XAES), X-ray diffraction (XRD), and contact angle measurement. The thickness of CuSn thin films was fixed at $200{\pm}10nm$ and deposition rate was calculated by the measured with a surface profiler. From the survey XPS spectra, the characteristic peaks of Cu and Sn were observed. Therefore, CuSn thin films were successfully synthesized on the Si (100) substrate. The oxidation state and chemical environment of Cu and Sn were investigated with the binding energy regions of Cu 2p XPS spectra, Sn 3d XPS spectra, and Cu LMM Auger spectra. Change of the crystallinity of the films was observed with XRD spectra. Using contact angle measurement, surface free energy (SFE) and wettability of the CuSn thin films were studied with distilled water (DW) and ethylene glycol (EG).

• 한국분말재료학회지
• /
• 제13권1호
• /
• pp.46-51
• /
• 2006

Through the volume change of Sn in a low-temperature phase transformation, the Sn nanopowder with high, purity, was fabricated by an economic and eco-friendly process. The fine cracks were spontaneously generated. in, Sn ingot, which was reduced to powders in the repetition of phase transformation. The Sn nanopowder with 50 run in size was obtained by the 24th repetitions of phase transformation by low-temperature and ultrasonic treatments. Also, the $SnO_2$ powder was fabricated by the oxidation of the produced Sn powder to the ingot and milled by the ultrasonic milling method. The $SnO_2$ nanopowder of 20 nm in size was fabricated after the milling for 180 h.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2017년도 춘계학술대회 논문집
• /
• pp.130-130
• /
• 2017

Au 합금 도금층은 내마모성 및 내식성이 우수하고 접촉저항이 낮기 때문에, 커넥터, 인쇄회로기판 등과 같은 전자부품의 접속단자부에 널리 적용되고 있다. 각 부품들을 효과적으로 전기적 신호를 통해 연결하기 위해서는 낮은 접촉저항이 요구되며, 이러한 Au 합금 도금층의 접촉저항은 합금 원소의 종류 및 함량, 용융 솔더와 전자부품을 고정시키는 표면실장공정에서 받는 theremal aging의 온도와 시간에 따라 변화된다. 현재 전자부품용 커넥터에 실시되고 있는 금 합금도금은 Au-0.3wt%Co합금, Au-0.2wt%Ni합금도금이 대부분 적용되고 있으며, 높은 순도(금 함유량 99.7wt%이상)로 인하여 금 사용량을 절감하기 어려운 실정이다. Sn은 Au와 높은 고용률을 갖는 합금을 형성하는 장점을 갖고 있기에 금 사용량 절감에 큰 기여를 할 수 있을 것으로 예상된다. 따라서 본 연구에서는 Sn을 합금 원소로 사용하여 높은 Sn함량을 갖는 Au 합금 도금층을 제작하고, 무연솔더의 융점보다 더 높은 온도인 533K에서 thermal aging을 실시하여, Sn함량별로 thermal aging에 따른 접촉저항과 솔더퍼짐성의 변화를 기존의 Co, Ni합금과 비교 조사하였다. 또한, 표면분석을 통하여 Au-Sn합금 도금층의 접촉저항이 변화하는 요인에 대해서도 고찰하였다. 표면적 $0.2dm^2$의 순수 동 시편 위에 약 $2{\mu}m$두께의 Ni도금을 실시한 후 Sn 함량을 다르게 준비한 도금 용액(Au 6g/L, Sn 1~8g/L)을 사용하여 Au-Sn합금 도금을 실시하였다. Au-Sn합금 도금층은 전류밀도 0.5ASD, 온도 $40^{\circ}C$에서 약 $0.1{\mu}m$두께가 되도록 도금하였으며, 두께는 형광X선 도금두께측정기로 측정하였다. 금 합금 도금층 내의 Sn함량은 Ti시편 위에 도금한 Au-Sn합금층을 왕수에 용해시킨 다음, ICP를 사용하여 분석하였다. Au-Sn합금 도금층의 접촉저항은 준비된 시편을 533K에서 1분 30초, 3분, 6분 간 열처리한 후, 5회 접촉저항을 측정하여 그 평균값으로 하중에 따른 금 합금 도금층의 접촉저항을 비교하였다. 솔더링성은 솔더볼을 합금 표면에 솔더페이스트를 이용하여 붙인 뒤 533K에서 30초간 열처리하고, 열처리 후 솔더볼의 높이 변화를 측정해 열처리 전 솔더볼의 높이에 비해 퍼진정도를 측정하였다. 또한, 도금층 내의 Sn함량에 따라서 접촉저항이 변화하는 요인을 분석하기 위해서 X선 광전자 분광기를 이용하여 도금층 표면의 정량 분석 및 화학적 결합상태를 분석하였다. ICP분석결과 Au-Sn합금층 내의 Sn함량은 도금용액의 조성별로 9~12wt% Sn 합금층이 형성된 것을 알 수 있었고 기존의 Au-Ni, Au-Co 합금층과 비교해 합금함량이 크게 증가된 것을 알 수 있었다. 또한 접촉저항 측정 결과, 기존의 Au-Ni, Au-Co합금층의 접촉저항과 비교했을 때 Au-Sn합금층의 접촉저항이 더 낮은 것을 알 수 있었다. 또한, 솔더퍼짐성 측정 결과 기존의 Au-Ni, Au-Co합금층과 비교해 솔더퍼짐성이 우수한 것을 확인할 수 있었다. 따라서 전자부품용 접점재료에 합금함량이 높은 Au-Sn합금층을 적용시키면 더 우수한 커넥터의 성능을 얻을 수 있을 뿐 아니라 경제적으로 큰 절약 효과를 기대할 수 있을 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.360.2-360.2
• /
• 2016

CuSn thin films were fabricated by rf magnetron co-sputtering method on the Si(100) substrate for evaluation of the antibacterial effect. The co-sputtering process was performed with different rf powers and sputtering times to regulate the thickness of the films and relative atomic ratio of Cu to Sn. The physicochemical properties of the CuSn thin films were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), X-ray induced Auger electron spectroscopy (XAES), Optical microscope (OM), 4-point probe, and antibacterial test. An antibacterial test was conducted with Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) as changing contact times between CuSn fillms and bacteria suspension. We compared to the crystalline structures of films before sterilization and after sterilization by XRD measurement. The changes of oxidation states of Cu and Sn and the chemical environment of films before and after antibacterial test were investigated with high resolution XPS spectra in the regions of Cu 2p, Cu LMM, and Sn 3d. After antibacterial test, the morphology of the films was checked with an OM images. The electrical properties of the CuSn films such as surface resistance and conductivity were measured by using 4-point probe.

• 대한전자공학회논문지
• /
• 제25권11호
• /
• pp.1315-1322
• /
• 1988

$SnO_X$/Pt 薄膜형 가스感知素子의 製造하고 그 특성을 결정하였다. $SnO_X$/Pt 薄膜은 $SnO_2$에 Pt를 重量比로 2% 섞은 표적을 電子량 加熱승치法으로 形成하였다. 素子의 전도도는 온도의존성을 보였고, CO 가스에 대한 感度는 2000 ppm 이하의 낮은 농도범위에서 가스농도는 평방근에 비례하였다. 최적동작온도는 약 300$^{\circ}$C 였고 CO 가스농도가 5000 ppm에서의 응답시간은 약 20초 였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.347-349
• /
• 1997

In order to investigate CO sensing property of a SnO$_2$-WO$_3$composite ceramic. we prepared pure SnO$_2$and WO$_3$added SnO$_2$compostie ceramics. Using XRD and SEM, a phase analysis and microstructure were investigated. The resistances as a function of gas atmosphere were measured by High Voltage Measure/source Unit. The measured 1000ppm CO gas sensitivity of SnO$_2$-WO$_3$composite ceramics were smaller than that of pure SnO$_2$.