• The korean journal of orthodontics
• /
• v.22 no.1
• /
• pp.205-227
• /
• 1992

This study was aimed to investigate the characteristics & the causative areas of the adult skeletal class III malocclusions with different facial divergency. The lateral cephalograms of 80 subjects with skeletal class III malocclusion from 17 to 29 years of age were classified into 3 groups according to SN-MP angle; hypodivergent group $(21.65{\pm}3.52^{\circ})$, neutrodivergent group $(30.50{\pm}2.29^{\circ})$ and hyperdivergent group $(40.02{\pm}3.98^{\circ})$. The data were gathered by digitizing of the traced cephalograms and were statistically analyzed. The results were as follows: 1. The anterior cranial base of the hyperdivergent group was shortest & tipped upwardly to the FH plane. 2. The maxilla of hyperdivergent group was shortest anteroposteriorly and positioned posteriorly to the anterior cranial base. 3. The degree of the mandibular prognathism in hyperdivergent group was less than the hypodivergent group. The hyperdivergent group showed the downward & backward rotated mandible. 4. The mandibular ramus & body was short & slender in the hyperdivergent group and the gonial angle was greatest in the hyperdivergent group. 5. The temporomandibular joint was positioned more superiorly to the anterior cranial base in the hyperdivergent group. 6. The cranial base, palatal plane, occlusal plane and mandibular plane were diverged in the hyperdivergent group. And this group had a great anterior total facial height, especially anterior lower facial height. 7. The craniofacial characteristics of skeletal class III malocclusion were critical in the vertical structure than the horizontal.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.3
• /
• pp.88-94
• /
• 2002

Recently, the life cycle and the lead-time of a product are to be shortened in order to satisfy consumer's demand. It is thus important to reduce the time and cost in manufacturing trial products. Several technique have been developed and successfully commercialized in the market of RPM(Rapid Prototyping and Manufacturing). However, most commercial systems currently use resins or waxes as the raw materials. So, the limited mechanical strength for functional testing is regarded as an obstacle towards broader application of rapid prototyping techniques. To overcome these problems, high-speed machining technology is being investigated worldwide for rapid manufacturing and even for direct rapid tooling application. In this paper, some fundamental experiments and analyses are carried out to obtain the filling time, materials, method, and process parameters for HisRP(High-Speed RP) process. HisRP is a new RP process that is combined high-speed machining with automatic filling. In filling process, Bi58-Sn alloy is chosen as filling material because of the properties of low-melting point, low coefficient of thermal expansion and no harm to environment. Also the use of filling wire it if advantage since it needs simple and flexible mechanism. Then the rapid product, for example a skull, is manufactured for aluminum material by HisRP process with an automatic set-up device thor 4-faces machining.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.1
• /
• pp.70-75
• /
• 1992

This study was carried out to investigate the characteristics of a mutant, Pseudomonas maltophilia H-8M selected with the treatment of Pseudomonas maltophilia H-8 by N-methyl-N-nitro-N-nitrosoguanidine(MNNG). This mutant showed highest ability of cadmium accumulation. The growth rate of Pseudomonas maltophilia H-8M showed about 80% in 1000ppm Cd containing medium when compare with control for 36h at $30^{\circ}C$. Pseudomonas maltophilia H-8M not inhibited on the growth in addition of various heavy metal such as $Hg^{2+}$, $Zn^{2+}$, $Pb^{2+}$, $Cu^{2+}$, $Cr^{2+}$ and $Co^{2+}$, but inhibited in $Sn^{2+}$ containing medium, respectively. Pseudomonas maltophilia H-8M was accumulated the highest cadmium level of 62.3% on whole cell in the medium containing 50 ppm and 80% of accumulated cadmium was distributed in the cell wall.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.349-349
• /
• 2014

ITO는 결정질 실리콘 태양전지의 anti-reflection coating (ARC) 층으로써 적합한 물질이다. ARC layer로써 구조적, 전기적 그리고 광학적 최적 조건의 특성을 얻기 위해는 높은 figure of merit(FOM)를 가져야 하고 결정방향 제어를 해야 한다. 본 연구에서는 결정질 실리콘 태양전지에 가장 적합한 ITO ARC layer의 특성 찾기 위해 Radio frequency magnetron sputter를 이용하여 공정 조건가변 실험을 진행 하였으며 높은 FOM을 갖는 ITO 반사방지막을 shallow emitter형 결정질 실리콘 태양전지에 적용하였으며 ITO 박막은 shallow emitter층과 완벽한 ohmic 접합을 이루었다. ITO ARC layer를 적용한 Shallow emitter형 태양전지는 81.59%의 fill factor와 $35.52mA/cm^2$의 단락전류를 보이며 17.27%의 광변환 효율을 보였다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.7
• /
• pp.1175-1179
• /
• 2004

Structured lipid (SL) was produced from soybean oil with molar ratio of 1：2：2 (soybean oil：capric acid：CLA) using Chirazyme L-2 lipase (4％ by weight of total substrates). The reaction was conducted for 24 hr at 55$^{\circ}C$ in a 1 L stirred-batch type reactor. SL-soybean oil contained 4.9 mol％ capric acid and 4.1 mol％ CLA, respectively. Iodine value of SL-soybean oil was reduced than that of soybean oil due to the incorporated capric acids. Tocopherol content in SL-soybean oil was 18.2 mg/l00 g. SL-soybean oil appeared more yellowish color than soybean oil. Reverse-phase HPLC showed that SL-triacylglycerol species containing capric acid consisted of about 12.6 area％.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.3
• /
• pp.278-290
• /
• 1991

Prediction of the sop tissue changes following hard tissue movements is very important in the preoperative analysis of surgical changes of the patient who have orthognathic surgery. This study examined post operative changes of the mid-facial sop tissues in Koreans depending upon two major positional changes of the maxilla following Le Fort - I type osteotomy for orthognathic purposes. Sixty patients(41 males and 19 females) of Koreans were selected and divided into two groups according to directional change of movement of anterior bony structures of the Maxilla as follows : Group I (44 patients) was mooed anteriorly and/or inferiorly, and Group II (16 patients) was mooed posteriorly and/or superioly. Postoperative changes of the sop tissue measurements following hard tissue changes were examined on pre - and post - operative cephalometrics by means of computerized digitation methods and the ratios of changes were analysed. The results were obtained as follows : 1. In Group I, all of the sop tissue measures except the Pn was closely followed by the changes of the hard tissue measures in the horizontal plane, but the Sn and the Cm were only correlated to the vertical changes(p<0.001). In group II, all of the sop tissue measures excluding of the N' and the Pn were significantly correlated to the hard tissue measures in horizontal plane(p<0.001), but the Ls and Stm were only correlated relatively to the vertical changes of the ANS(p<0.01). 2. Predictable ratio of the Sn was 66% of the ANS or 56% of the A in the horizontal plane and 89% of the A in the vertical plane in Group I. In Group II, the Sn was predictable as 85% of the ANS or 70% of the A in the horizontal plane but was not predictable in vertical plane. 3. Predictable ratio of the Cm was 28% of the ANS or 50% of the A in the horizontal plane and 56% of the ANS or 36% of the A in the vertical plane in Group I. In Group II, the Cm was predictable horizontally as 74% of the A. Predictable ratio of the Pn was 30% of the ANS or 38% of the A in horizontal plane in Group I, but it was not predictable both horizontally and vertically in Group II. 4. Predictable ratio of the Ls was 52% of the Pr in Group I and 77% in Group II in the horizontal plane. The Stm was predictable as 34% of the pr or 22% of the I in the horizontal plane in Group I, and was also predictable as 55% of the pr or 68% of the I horizontally and 21% of the pr or 65% of the I vertically in Group II. 5. All ratios of change in the thickness. length and area of the upper lip following maxillary movement were statiscally correlated, however, mangitudes of them were meaningful clinically.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.394-400
• /
• 2014

In this study, we fabricated ITZO thin films on glass substrates with various RF power from 30 to 60W and investigated the electrical, optical and structural properties. ITZO thin film deposited at 50W exhibited the largest figure of merit ($10.52{\times}10^{-3}{\Omega}^{-1}$) and then its resistivity and sheet resistance were $3.08{\times}10^{-4}{\Omega}-cm$ and $11.41{\Omega}/sq.$, respectively. As results of optical characterization, average transmittance of all ITZO thin films were over 80%. ITZO thin films had amorphous structure regardless of the RF power. The FESEM and AFM results showed that all ITZO thin films have a very smooth surface having no cracks and defects and the film deposited at 50W exhibit the smallest surface roughness of 0.254nm. We found that a amorphous ITZO thin film is a very promising material for replacing ITO in the next display device such as OLED.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.52-52
• /
• 2018

Only approximately 30% of fossil fuel energy is used; therefore, it is desirable to utilize the huge amounts of waste energy. Thermoelectric (TE) materials that convert heat into electrical power are a promising energy technology. The TE materials can be formed either as thin films or as bulk semiconductors. Generally, thin-film TE materials have low energy conversion rates due to their thinness compared to that in bulk. However, an advantage of a thin-film TE material is that the efficiency can be smartly engineered by controlling the nanostructure and composition. Especially nanostructured TE thin films are useful for mitigating heating problems in highly integrated microelectronic devices by accurately controlling the temperature. Hence, there is a rising interest in thin-film TE devices. These devices have been extensively investigated. It is demonstrated that transparent amorphous oxide semiconductors (TAOS) can be excellent thermoelectric (TE) materials, since their thermal conductivity (${\kappa}$) through a randomly disordered structure is quite low, while their electrical conductivity and carrier mobility (${\mu}$) are high, compared to crystalline semiconductors through the first-principles calculations and the various measurements for the amorphous In-Zn-O (a-IZO) thin film. The calculated phonon dispersion in a-IZO shows non-linear phonon instability, which can prevent the transport of phonon. The a-IZO was measured to have poor ${\kappa}$ and high electrical conductivity compared to crystalline $In_2O_3:Sn$ (c-ITO). These properties show that the TAOS can be an excellent thin-film transparent TE material. It is suggested that the TAOS can be employed to mitigate the heating problem in the transparent display devices.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.52-56
• /
• 2006

Some of factors affecting photo-conversion efficiency of dye sensitized solar cells (DSCs) are discussed in terms of $TiO_2$ electrodes. The first topic is on the surface modification of $TiO_2$ nano-particles, which is associated with electron traps on the surface of $TiO_2$ nano-particles. The surface is modified with dye molecules under pressurized $CO_2$ atmosphere to increase the surface coverage of $TiO_2$ nano-particles with dye molecules. This increases Jsc because of an increase in the amount of dye molecules and a decrease in the amount of trapping sites on $TiO_2$ nano-particles. In addition, the decrease in the amount of trap sites increases Voc because decreases in Voc are brought about by the recombination of $I_2$ molecules with electrons trapped on the $TiO_2$ surfaces. Selective staining for tandem cells is proposed. The second topic is on the contact between a $SnO_2$/F transparent conductive layer (TCL) and nano-particles. Polishing the TCL surfaces with silica nano-particles increases the contact, resulting in Jsc increases. The third topic is the fabrication of ion-paths in $TiO_2$ layers. Electro-spray coating of $TiO_2$ nano-particles onto TCL is shown to be effective for fabricating ion-paths in $TiO_2$ layers, which increases Jsc.

• Journal of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.48-52
• /
• 1988

Kinetics of the reaction of 2-phenethyl p-bromobenzenesulfonate with substituted pyridines in acetonitrile were investigated by an electric conductivity method at 1-2000 bars and $45{\sim}55{\circ}C$. The rates of these reactions were increased with raising temperatures, pressures and by changing electron-donating substitutents in pyridine. When raising pressure the Hammett reaction parameter $I{\rho}I$ and Bronsted ${\beta}$ values were increased, and isokinetic temperature observed from isokinetic relations hip between ${\Delta}H^{\neq}$ and TEX>${\Delta}S^{\neq}$ was decreased. These results indicate that the $S_N2$ characters were increased with raising pressure.