• 한국소음진동공학회논문집
• /
• 제13권7호
• /
• pp.548-554
• /
• 2003

This study alms to investigate the dynamic properties of express buses in the very low frequencies which cause motion sickness Incidence. Since passengers often use express buses for long distance traveling. it is a critical point whether the ride give rise to motion sickness or not. In the study accelerations at the three Points on the floor of the six test vehicles were measured during the driving at constant speeds. By applying the frequency weighting corves suggested in ISO 26.31-1, the Physical quantity of accelerations were changed into the perceptual amount used to judge quantitatively the incidence of motion sickness. Motion sickness dose values were calculated from the frequency weighted time history of acceleration signals, and compared between the vehicles, driving conditions. and the seat positions in the bus. During the 50 minutes' driving on the public road and high ways. the vomiting incidence ratios were seen to range from 0.4 to 0.8 ％. which is equivalent to 2.4 to 4.8 ％ for 5 hours' driving. Unlike the very smooth road conditions considered in this work, motion sickness dose values encountered in real situations are expected to increase.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권9호
• /
• pp.4438-4460
• /
• 2017

The Kernelized Correlation Filters (KCF) tracker has caused the extensive concern in recent years because of the high efficiency. Numerous improvements have been made successively. However, due to the abrupt motion between the consecutive image frames, these methods cannot track object well. To cope with the problem, we propose an extended KCF tracker based on swarm intelligence method. Unlike existing KCF-based trackers, we firstly introduce a swarm-based sampling method to KCF tracker and design a unified framework to track smooth or abrupt motion simultaneously. Secondly, we propose a global motion estimation method, where the exploration factor is constructed to search the whole state space so as to adapt abrupt motion. Finally, we give an adaptive threshold in light of confidence map, which ensures the accuracy of the motion estimation strategy. Extensive experimental results in both quantitative and qualitative measures demonstrate the effectiveness of our proposed method in tracking abrupt motion.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.234-240
• /
• 2003

This study aims to investigate dynamic properties of express buses in the very low frequencies which affect motion sickness incidence. Since passengers often use express buses for long distance traveling, it is a critical point whether a give rise to motion sickness or not. In the study accelerations at the three points on the floor of the six test vehicles were measured during the driving at constant speeds. By applying frequency weighting curves suggested in ISO 2631-1 and ISO 2631-3, physical amount of accelerations were changed into perceptual amount which determines incidence of motion sickness. Motion sickness dose values were calculated from the frequency weighted time history of accelerations, and compared between the vehicles, driving conditions, and the seat positions in the bus. During the driving on public road and high ways for 50 minutes vomiting incidence ratios ranged 0.4 to 0.8%, which were equivalent to 2.4 to 4.8% for 5 hours' driving. The value of 4.8 % means two among 45 passengers may vomit after the traveling, which is very serious situation. Considering the very smooth driving condition at which the data were collected, motion sickness dose values will increase in real situations

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.411-412
• /
• 2002

Piston-cylinder system are widely used in power engineering applications. In reciprocating refrigeration compressors, where extremely low friction losses are required, ringless pistons are being used to diminish the friction between piston rings and cylinder wall. Since the ringless piston has the freedom of lateral motion there is a potential danger that it will occasionally hit the cylinder wall while moving up and down along it's axis. A good design must therefore provide a smooth and stable reciprocating motion of the piston and ensure that the fluid film separating the piston from the cylinder wall is maintained all times. And the compromise between refrigerant gas leakage through the piston-cylinder clearance and the friction losses is required utilizing a dynamic analysis of the secondary motion for the high efficiency compressor. To this end, the computer program is developed for calculating the entire piston trajectory and the lubrication characteristics as functions of crank angle under compressor running conditions. The results explored the effects of some design parameters and operating conditions on the stability of the piston, the oil leakage, and friction losses.

• 한국통신학회논문지
• /
• 제25권3B호
• /
• pp.510-518
• /
• 2000

A new video interpolation technique based on variable skip rate of video sequence is proposed in this paper. in the proposed technique. the determination whether a frame is skipped or not is done by the degree of motion complexity of the frame. If the motion complexity of a frame is low the frame is skipped. otherwise it is coded and transmitted. To determine the motion complexity of a frame a new technique using MEF (moving edge in frame),the set of pixels considered as moving edges in a frame. is introduced. In the course of decoding and interpolating of receiver., the motion field is segmented. For the purpose of dividing vector field morphological filtering is applied. Morphological filtering also used to smooth the boundaries between the changed and unchanged region. In the simulation results, the proposed technique shows higher quality and lower fluctuation of picture quality than the conventional techniques on conditioning of the same bit rate.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권8호
• /
• pp.1285-1295
• /
• 2008

A research on a simulator for a side walking path of a 16 degree-of-freedom (d.o.f) biped walking robot(BWR) which is composed of 4 d.o.f upper-part body and 12 d.o.f lower-part of the body is presented. For generation of stable side walking motion, the kinematics, dynamics and the zero moment of point(ZMP) of the BWR were analyzed analytically and included in the simulator. To operate the motion simulator for stable side walking of the BWR, a graphic user interface program was developed which needs inputs for the side distance between legs, base joint angle, walking type, and walking velocity. The simulator was developed to generate joint angle data of legs for side walking, and the data are transmitted to the BWR for stable side walking. In the simulator, a new path function for smooth walking motion was proposed and applied to the simulator and actual motion of a BWR. Also for actual side walking, an algorithm for estimating backlashes of the actuating joint motors was proposed and included in the simulator. To validate the performance of the proposed motion simulator, the simulator was operated and its side walking data of the simulator were generated for a period of side walking.

• 전기학회논문지P
• /
• 제51권3호
• /
• pp.155-160
• /
• 2002

This paper focuses on the problem of local obstacle avoidance of mobile robots. To solve this problem, the safety direction section search algorithm is suggested. This concept is mainly composed with non-collision section and collision section from the detecting area of laser scanning sensor. Then, we will search for the most suitable direction in these sections. The proposed local motion planning method is simple and requires less computation than others. An environment model is developed using the vector space concept to determine robot motion direction taking the target direction, obstacle configuration, and robot trajectory into account. Since the motion command is obtained considering motion dynamics, it results in smooth and fast as well as safe movement. Using the mobile base, the proposed obstacle avoidance method is tested, especially in the environment with pillar, wall and some doors. Also, the proposed autonomous motion planning and control algorithm are tested extensively. The experimental results show the proposed method yields safe and stable robot motion through the motion speed is not so fast.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.327-330
• /
• 2006

With the increasing requirements for the survey and development of the ocean, the demands on the of AUV(Autonomous Underwater Vehicle) technologies have been increased. Reconstruction and replay of the AUV motion on the basis of the data stored during the execution of mission, can help the development of control strategies for AUVs such as mission planning and control algorithms. While an AUV cruises for her mission, her attitude and position data are is recorded. The data can be used for visualization of the motion in off-line. However, because most of the position data gathered from acoustic sensors have long time-interval and include intermittent faulty signal, the replayed motion by the graphic simulator can not demonstrate the motion as a smooth movie. In this paper, interpolation methods are surveyed to reconstruct the AUV position data. Then, an efficient 3D visualization method for AUV motion using the interpolation method is proposed. Simulation results arc also included to verify the proposed method.

• 로봇학회논문지
• /
• 제18권2호
• /
• pp.143-154
• /
• 2023

In this study, a fast motion planning method for the swing motion of a 6x6 wheel-legged robot to traverse large obstacles and gaps is proposed. The motion planning method presented in the previous paper, which was based on trajectory optimization, took up to tens of seconds and was limited to two-dimensional, structured vertical obstacles and trenches. A deep neural network based on one-dimensional Convolutional Neural Network (CNN) is introduced to generate keyframes, which are then used to represent smooth reference commands for the six leg angles along the robot's path. The network is initially trained using the behavioral cloning method with a dataset gathered from previous simulation results of the trajectory optimization. Its performance is then improved through reinforcement learning, using a one-step REINFORCE algorithm. The trained model has increased the speed of motion planning by up to 820 times and improved the success rates of obstacle crossing under harsh conditions, such as low friction and high roughness.

• 문화기술의 융합
• /
• 제6권1호
• /
• pp.515-520
• /
• 2020

본 연구에서는 4절 평행 링크의 설계와 실제 구현에 대한 것으로 평행 4절 링크는 한축의 회전을 다른 축의 회전 운동으로 전달하기 위한 기본적인 기구학적 메카니즘으로 널리 이용되고 있다. 그런데 평행 4절 링크는 운동 도중에 전환점에서 위상 역전이 발생하는 문제가 발생하여 실제 구현에서는 이를 고려하여 설계하여야 한다. 링크 역전을 방지하기 위해서는 추가적인 위상 역전 억제용 링크를 옵셋을 두어 붙이는 2중 평행 사변형 형태의 링크를 제작하면 되는 것으로 일부 알려져 있으나 실제 제작하여 실험한 결과 전환점에서 운동이 부드럽지 않은 현상이 발생하였다. 본 연구에서는 이 문제를 해결하기 위해 위상 역전 방지를 위한 옵셋을 주는 링크외에 보조적으로 평활한 운동을 위한 링크를 추가시켜 피동축이 구동축을 따라 회전할 때에 특정지점에서 위상 역전이 발생하지 않고 평활한 운동을 수행하는 것을 확인 할 수 있었다.