• 한국분무공학회지
• /
• 제7권1호
• /
• pp.1-6
• /
• 2002

This study has focused on using fuel injections as variables for measuring performance and reducing exhaust gas in turbo-charger diesel engine. In experiments, we changed nozzle hole diameter, diameter of an injection pipe, and injection timing as variable. The results show that torque. fuel consumption and smoke are reduced as nozzle hole diameter decreases, while NOx increases. When the diameter of injector is reduced, torque, fuel consumption and smoke are deteriorated, but NOx is decreased. In addition, when the time for injection is advanced. torque, fuel consumption and smoke are improved, but the density of NOx is increased.

• 한국산학기술학회논문지
• /
• 제21권4호
• /
• pp.324-329
• /
• 2020

비상피난 지원시스템은 화재 발생시 차연막이 형성되고 차연막 내부로 외기를 급기 가압을 해주어 연기의 유입을 막아주어 안전한 대피로를 제공한다. 본 연구에서는 수치해석을 통해 급기구 지름이 10, 15, 20, 30 mm로 변화 할 때 비상피난 지원시스템 차연막 내부에 급기구 크기가 유동에 미치는 영향을 분석하였다. 그 결과 급기구 지름이 감소할수록 비상피난지원 시스템 입구부터 출구 길이 방향으로 급기구를 통한 유량이 비교적 고르게 형성 되는 양상을 보였다. 또한 20 mm 이상으로 급기구를 타공 할 경우 출구부 근처에는 급기 유량이 거의 발생하지 않는 문제점이 발생 하므로 급기구 지름을 20 mm 보다 작게 타공 해야 할 것으로 판단된다. 차연막 내부 공간 압력은 20 mm 이하로 타공시 길이 방향으로 비교적 매우 균일한 분포를 보였다. 또한 수치해석 결과를 이용하여 급기구의 부차 손실계수을 산출 하였으며 약 K=1.5 으로 계산되었다. 따라서 향후 비상피난 지원 시스템 설계시 본 연구에서 도출한 급기구 지름에 따른 유동특성과 급기구의 부차손실을 적용하여 적절한 설계가 수행될 수 있을 것으로 판단된다.

• 셀메드
• /
• 제2권4호
• /
• pp.36.1-36.4
• /
• 2012

This study was carried out to investigate the neurobehavioural effects of the smoking of Carica papaya leaves based on ethnopharmacological information. Twenty -four rats used for the study were grouped into four groups namely; Groups 1 (Control, unexposed to any smoke) and Groups 2 - 4 (exposed to smoke from varying amount of pawpaw leaf powder). Groups 2, 3, and 4 were exposed to smoke from 6.25 g (low dose), 12.50 g (medium dose), and 18.75 g (high dose) of dry pawpaw leaves respectively in a smoking chamber twice daily for 21 one days with each exposure lasting 3 min. The spontaneous motor activities and locomotory behaviour of the animals were assessed using an open field maze and hole board maze test. The results showed that the smoking of Carica papaya leaves led to a significant (p < 0.05) increase in locomotory activities from $33.36{\pm}3.36$ (control) to $66.50{\pm}6.16$ (high dose), number of head dips (from $8.50{\pm}0.36$, to $12.83{\pm}0.87$) and rearing behaviour (from $14.83{\pm}0.74$, to $27.0{\pm}1.46$). However, the freezing durations as animals were introduced into the maze and grooming behaviour were significantly (p < 0.05) reduced in the treated groups. In conclusion, the increased ambulations and exploratory behaviours imply that the anxiety level is low in the treated groups compared to the control group which thus confirms that dry Carica papaya leaf may possibly contain psychoactive substance(s) that become active when smoked.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제9권9호
• /
• pp.721-736
• /
• 2019

본 논문에서는 대심도에 위치한 지하역사(지하 6층) 및 터널에서 화재가 발생했을 경우 제연설비 작동에 따른 연기의 거동을 측정하였다. 열풍기를 이용하여 열부력 효과를 구현한 연기발생장치를 이용하여 화재연기를 생성하였다. 화재발생 위치는 승강장 위 및 스크린도어 외부에 위치한 터널부의 승강장 위의 2가지 위치를 선정하였다. 승강장 화재발생시 승강장에 설치된 환기구를 통하여 연기가 배출되도록 하는 제연모드가 일반적인데 본 연구에서는 승강장 양단에 위치한 터널부의 환기구를 통한 배기도 같이 동작되도록 설정하여 실험을 수행하였다. 다양한 위치에서 연기농도 및 풍향풍속을 측정하였고 화면을 취득하여 연기의 이동 및 제연을 분석하였다. 승강장 내부에서 화재가 발생하였을 경우와 선로부에서 화재가 발생하였을 경우 승강장의 송풍기의 제연모드 동작과 터널의 송풍기의 배연 동작으로 인하여 연기배출이 원활하였고 화재 발생 인근 구역으로의 연기전파가 억제되었다. 본 연구에서 제시한 승강장 및 승강장 양단부의 터널에 적용되는 송풍기를 같이 운전하는 제연모드를 통하여 승강장 화재 및 화재열차 정차시 화재 연기로부터 승객들에게 보다 안전한 대피환경을 제공할 수 있을 것이다.

• 한국기계가공학회지
• /
• 제19권1호
• /
• pp.29-35
• /
• 2020

Car inspection systems are regularly carried out by the state to ensure the safety and emission status of cars, thereby improving the safety and quality of life by reducing fine dust and greenhouse gases that are the main culprits of vehicle defects and air pollution. These automobile inspections are largely divided into either regular or comprehensive inspections. This study analyzed the smoke measuring probes used in the lug - down 3 mode. In the previously issued paper "Improvement of Soot Probe Efficiency for Automotive Emission Measurement," an improved smoke measurement probe(B) improved on the problems that arise from the current smoke measurement probe (A). In this study, a technique that can improve the probe's inhalation efficiency over the improved (B) probes was applied to probes (C). Probe (C) involves a structure designed close to the center of the circumference of the exhaust pipe, and the suction efficiency was improved by adding a variable center unit.

• 대한기계학회논문집B
• /
• 제23권5호
• /
• pp.646-652
• /
• 1999

Detailed characteristics of the mean flow field inside the rotor of a multiblade fan with scroll are presented in this paper by measurements and visualizations. The measurements were taken with a five-hole probe and conformed by smoke test. How field is distinguished clearly in 3 regions with respect to the flow directions. The first region is near the exit of scroll where the fluid flows the opposite direction to the rotation of rotor. The second is opposite side of the scroll exit where the fluid flows the same direction to the rotation of rotor. The third is the region where the fluid flows toward the blades directly with the largest values comparatively. The strongest recirculation is happened in the second region, and the weakest one is in the third region. This complex configuration makes the flow field highly non-uniform and may cause to generate a noise and ineffective flow efficiency.

• 한국자동차공학회논문집
• /
• 제22권7호
• /
• pp.84-89
• /
• 2014

Not only the emission regulation of on-road vehicle engine, but also emission regulation of off-road engine have been reinforced. It is the reason of wide application of emission reduction technology for off-road engines. In this study, optimization of engine parameters (Injector hole number, Injection timing and EGR rate) for reduction of NOx and smoke emissions were conducted by using the analysis of sensitivity and S/N ratio of Taguchi method(DOE). As results, this paper shows optimum value of the parameters for NOx and smoke emission reduction. From the result of reproducibility verification, it is final that the prediction value of NOx and smoke has the error of below 10%. Consequently, the method and results of this study will be used for quantitative reference to EGR control mapping in next study.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.25-32
• /
• 2021

In the previous study, a study was conducted to improve the exhaust gas intake efficiency by improving the existing soot measurement probe in the shape and angle of the exhaust port. As a result, it can be seen that the smoke measurement performance according to the shape and angle is improved. In previous studies, the performance of the soot probe was not confirmed for the Korean KD 147 mode, which has a low suction flow rate and a long inspection time. So, we would like to confirm the improvement of the smoke probe performance of the Korean KD 147 mode, which is close to the actual driving conditions. The probe used in this study is another type of probe, and has a circular ring shape instead of a rib and variable center position unit, so the probe center hole is located close to the center of the exhaust pipe.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1244-1249
• /
• 2001

The characteristics of engine performance with fuel injection system in D.I. diesel engine were studied in this paper A fuel injection system has an important role in the performance and emission gas in a diesel engine. In this paper, an experimental study has been performed to verify the effect of the performance and the emission gas with the factors such as diameters of an injection nozz1e hole, diameters of an injection pipe and injection timing in the fuel injection system. The authors have obtained the results that optimizing the factors of fuel injection system is siginificant to enhance the performance of the engine system and consumption ratio of fuel, smoke, and NOx.

• 한국분무공학회지
• /
• 제6권3호
• /
• pp.32-37
• /
• 2001

The characteristics of engine performance with fuel injection system in D.I. diesel engine were studied in this paper. A fuel injection system has an important role in the performance and emission gas in a diesel engine. In this paper, an experimental study has been performed to verify the effect of the performance and the emission gas with the factors such as diameters of an injection nozzle hole, diameters of an injection pipe and injection timing in the fuel injection system. The authors have obtained the results that optimizing the factors of fuel injection system is significant to enhance the performance of the engine system and consumption ratio of fuel, smoke, and NOx.