• Proceedings of the Korean Society for Quality Management Conference
• /
• 2009.10a
• /
• pp.241-244
• /
• 2009

In this paper, it was performed to grasp the latest tendency of remanufacturing industry of domestic electronic components for development of remanufacturing technology and economical support of government. The merits of remanufacturing are to reuse old products to perform like a new product and to save energy, natural resources, landfill space and to reduce air pollution by less re-smelting. This paper proposes a systemic approach for activating the domestic remanufacturing industry. The approach is based on inside and outside regulations to apply remanufacturing companies. And, we analyzed the state and problems of remanufacturing industry for electronic components.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.1
• /
• pp.120-129
• /
• 2009

Remanufacturing is an industrial manufacturing process. The merits of remanufacturing are to reuse old products to perform like a new product and to save energy, natural resources, landfill space and to reduce air pollution by less re-smelting. This paper proposes a systemic approach for activating the domestic remanufacturing industry. The approach is based on inside and outside regulations to apply remanufacturing companies. And, we analyzed the state and problems of remanufacturing industry for automobile parts. Also 5 essential tactics and 20 detail strategies are suggested. On the basis of the approach, the domestic remanufacturing industry will carry out the cooperation for their competitions.

• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.32-36
• /
• 2003

The mining industry of Japan had rapidly grown after the World War II with the economic growth. There existed more than 350 mines all over Japan in the 1960’s. The mines however had been closed one after another under the influence of the world and domestic economic events such as the mining-related pollution in Japan after the middle of the 60’s, the Oil Crisises in 73 and 79 and the Strong Yen in 85 (Fig. 1). (omitted)

• Safety and Health at Work
• /
• v.10 no.3
• /
• pp.370-376
• /
• 2019

Background: Respirator fit testing is a method to assess if the respirator provides an adequate face seal for the worker. Methods: Workers from four Norwegian smelters were invited to participate in the study, and 701 respirator fit tests were performed on 127 workers. Fourteen respirator models were included: one FFABE1P3 and 11 FFP3 respirator models produced in one size and two silicone half masks with P3 filters available in three sizes. The workers performed a quantitative fit test according to Health and Safety Executive 282/28 with 5-6 different respirator models, and they rated the respirators based on comfort. Predictors of overall fit factors were explored. Results: The pass rate for all fit tests was 62%, 56% for women, and 63% for men. The silicone respirators had the highest percentage of passed tests (92-100%). The pass rate for the FFP3 models varied from 19-89%, whereas the FFABE1P3 respirator had a pass rate of 36%. Five workers did not pass with any respirators, and 14 passed with all the respirators tested. Only 63% passed the test with the respirator they normally used. The mean comfort score on the scale from 1 to 5 was 3.2. The respirator model was the strongest predictor of the overall fit factor. The other predictors (age, sex, and comfort score) did not improve the fit of the model. Conclusion: There were large differences in how well the different respirator models fitted the Norwegian smelter workers. The results can be useful when choosing which respirators to include in respirator fit testing programs in similar populations.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.1
• /
• pp.88-96
• /
• 1996

This study was conducted to establish model between lead and ZPP concentration in blood of workers exposed to lead. Workers employed in secondary smelting manufacturing industry showed $85.1{\mu}g/dl$ of blood lead level, exceeding $60{\mu}g/dl$, the Criteria for Removal defined by Occupational Safety and Health Act of Korea. Average blood lead level of workers in the battery manufacturing industry was $51.3{\mu}g/dl$, locating between $40{\mu}g/dl$ and $60{\mu}g/dl$, the Criteria for Requiring Medical Removal. Blood lead level of in the litharge and radiator manufacturing industry was below $40{\mu}g/dl$, the Criteria Requiring Temporary Medical Removal. Blood lead levels of workers by industry were Significantly different(p<0.05). 50(21 %) showed blood lead levels above $60{\mu}g/dl$, the Criteria for Removal and 66(27.7 %) showed blood lead levels between the Criteria for Requiring Medical Removal, $40-60{\mu}g/dl$. Thus, approximately 50 percent of workers indicated blood lead levels above $40{\mu}g/dl$, the Criteria Requiring Temporary Medical Removal and should receive medical examination and consultation including biological monitoring. Average ZPP level of workers employed in the secondary smelting industry was $186.2{\mu}g/dl$, exceeding above $150{\mu}g/dl$, the Criteria for Removal. Seventy seven of all workers(32.3 %) showed ZPP level above $100-150{\mu}g/dl$, the Criteria for Requiring Medical Removal. The most appropriate model for predicting ZPP in blood was log-linear regression model. Log linear regression models between lead and ZPP concentrations in blood was Log ZPP(${\mu}g/dl$) = -0.2340 + 1.2270 Log Pb-B(${\mu}g/dl$)(standard error of estimate: 0,089, ${\gamma}^2=0.4456$, n=238, P=0.0001), Blood-in-lead explained 44.56 % of the variance in log(ZPP in blood).

• Resources Recycling
• /
• v.28 no.4
• /
• pp.3-14
• /
• 2019

Lead is one of the common non-ferrous metals used in modern industry. The usage of lead continues to increase and has risen from 5 million tonnes per year worldwide in the 1970s to 11 million tonnes in the 2010s. In principle lead is virtually 100 % recyclable as an element without loss of quality. The recycling of lead scrap reduces the energy consumption and environmental burden, comparing to the primary metal production. Therefore production of secondary lead from scrap has been steadily growing and at present it meets approximately 60 % of usage worldwide. Lead scrap (mainly lead-acid battery) is smelted in primary and secondary smelter. Most secondary lead smelting were performed in a shaft-type furnace (blast furnace), rotary furnace and reverberatory furnace. The lead bullion is either cast into ingots and re-melted in refining kettles or refining is performed on the hot lead bullion immediately after production. This work provides an overview of the primary lead production and recycling process.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.1
• /
• pp.1-9
• /
• 2022

Objectives: The purpose of this study is to evaluate exposure characteristics of lead using data from the domestic occupational exposure literature. Methods: Occupational airborne exposure data on lead reported in the domestic literature from 1981 to 2018 were collected and re-analyzed. The exposure levels in the data were expressed as an estimated arithmetic mean and a weighted arithmetic mean (WAM) of the number of samples. Lead exposure characteristics were analyzed by industry, process, and year. Results: From a total of 14 documents, 8,305 airborne lead measurements for 17 industries were identified, and the WAM concentration in eight industries exceeded the occupational exposure limit of 50 ㎍/m³. Three industries (battery manufacturing, lead smelting, and litharge manufacturing) accounted for 95% of the total data, and exposure trends could be confirmed over 10 years. Exposure levels continue to decrease in all three industries. Conclusions: Considering the distribution outlook of lead and lead compounds, the main management targets are lead storage battery manufacturing and secondary smelting for lead regeneration.

• Advances in concrete construction
• /
• v.4 no.4
• /
• pp.283-303
• /
• 2016

Several types of industrial byproducts are generated. With increased environmental awareness and its potential hazardous effects, the utilization of industrial byproducts in concrete has become an attractive alternative to their disposal. One such by-product is ground granulated blast furnace slag (GGBS), which is a byproduct of the smelting process carried out in the iron and steel industry. The GGBS is very effective in the design and development of high-strength and high-performance concrete. This paper reviews the effect of GGBS on the workability, porosity, compressive strength, splitting tensile strength, and flexural strength of concrete.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.23 no.3
• /
• pp.299-306
• /
• 2013

Objectives: The purpose of this study is to provide current the recent information on indium-related adverse health effects and the Korean indium-related industries. Methods: Peer review papers were searched in environmental, occupational and medical journals with the keyword of 'Indium' and 'ITO' and reviewed. To determine the indium related industries and indium consumption amounts, references and database were investigated and analyzed. In addition, field walk-through surveys and interviews were conducted in order to collect field data and to ascertain the field situation for the processes and industries. Results: A total of 10 cases of indium lung diseases have been reported in series since the first case reported in 2001. Seven cases were found in Japan, two cases in the United States, and one in China. No indium lung case has been reported yet in Korea, but it is believed that there are high potential risks among workers in indium-related industries. There are four categories in indiumrelated- industry; indium production and smelting, manufacturing of indium products such as ITO target, the production of thin films of flat panel display, and indium recovery industry. We found that all these types of industries are operating in Korea. Therefore, it is necessary for industrial hygienists to understand the processes and industries related to indium as well as the adverse health effects of indium. Conclusions: It was found that all four categories of indium-related industry from the indium production to recovery industry are active in Korea. However, the adverse health effects of indium are not well recognized. Therefore, it is believed that there is a high risks in indium-related industry, and it is necessary to make emergency interventions.

• Korean Journal of Materials Research
• /
• v.31 no.12
• /
• pp.719-726
• /
• 2021

Through the process of chemical vapor deposition, Tungsten Hexafluoride (WF₆) is widely used by the semiconductor industry to form tungsten films. Tungsten Hexafluoride (WF₆) is produced through manufacturing processes such as pulverization, wet smelting, calcination and reduction of tungsten ores. The manufacturing process of Tungsten Hexafluoride (WF₆) is required thorough quality control to improve productivity. In this paper, a real-time detection system for oxidation defects that occur in the manufacturing process of Tungsten Hexafluoride (WF₆) is proposed. The proposed system is implemented by applying YOLOv5 based on Convolutional Neural Network (CNN); it is expected to enable more stable management than existing management, which relies on skilled workers. The implementation method of the proposed system and the results of performance comparison are presented to prove the feasibility of the method for improving the efficiency of the WF₆ manufacturing process in this paper. The proposed system applying YOLOv5s, which is the most suitable material in the actual production environment, demonstrates high accuracy (mAP@0.5 99.4 %) and real-time detection speed (FPS 46).