• Economic and Environmental Geology
• /
• v.48 no.3
• /
• pp.205-212
• /
• 2015

We have verified applicability of UAV(Unmanned Aerial Vehicle) photogrammetry to a mining engineering. The test mine is a smectite mine located at Gyeongju city in Gyeongnam province, Koera. 448 photos over area of $600m{\times}380m$ were taken with overlapped manner using Cannon Mark VI equipped to multicopter DJI S1000, which were processed with AgiSoft Photoscan software to generate orthophoto and DEM model of the study area. photogrammetry data with 10 cm resolution were generated using 6 ground control positions, which were exported to the 3D geological modeling software to make a topographic surface object. Monitoring of amount of ore production and landsliding could be done with less than 1 hours photographing as well as low cost. A direct link between UAV photogrammetry and 3D geological modeling technology might increase productivity of a mine due to appling the topographical surface change immediately according to the mining operation.

• Economic and Environmental Geology
• /
• v.46 no.3
• /
• pp.267-278
• /
• 2013

The East African Rift System(EARS) is known to be hosted epithermal Au-Ag deposits, and the best-known example is Main Ethiopian Rift Valley(MER) related to Quaternary bimodal volcanism. Large horst-graben system during rifting provides open space for emplacement of bimodal magmas and flow channel of geothermal fluids. In recent, large hydrothermally altered zones(Shala, Langano, and Allalobeda) and hot spring related to deeply circulating geothermal water have been increasing their importance due to new discoveries in MER and Danakil depression. The hot springs in Shala and Allalobeda occur as boiling pool and geyser on the surface, whereas some areas didn't observe them due to decreasing ground water table. The host rocks are altered to quartz, kaolinite, illite, smectite, and chlorite due to interaction with rising geothermal water. The hot springs in MER are neutral to slightly alkaline pH(7.88~8.83) and mostly classified into $HCO_3{^-}$ type geothermal water. They are strongly depleted in Au, and Ag, but show a higher Se concentration of up to 26.7 ppm. In contrast, siliceous altered rocks around hot springs are strongly enriched in Pb(up to 33 ppm, Shala), Zn(up to 313 ppm, Shala), Cu(up to 53.1 ppm, Demaegona), and Mn(up to 0.18 wt%t, Shala). In conclusion, anomalous Se in hot spring water, Pb, Zn, Cu, and Mn in siliceous altered rocks, and new discoveries in MER have been increasing potential for epithermal gold mineralization.

• 한국해양학회지
• /
• v.29 no.1
• /
• pp.17-27
• /
• 1994

The sediment collected from KODOS91-1 were studied using X-ray diffraction(SRD) analysis to clarify the composition and vertical distribution of clay minerals. Micropaleontological data(Radiolarians) was applied to identify the changes in post-depositional environment and chemical mechanism leading to the formation of authigenic minerals. The result show that the highest concentration of smectite is occurred in the lower part(Unit II, III) of sediment column and the lowest concentration in the upper part(Unit I) whereas terrestrial minerals, such as illite, kaolinite and quartz, indicate the opposite trends. Radiolarians in the upper part are composed entirely of Quaternary/Tertiary mixtures, whereas in lower sediment units generally revealed the middle Miocene to the Eocene. This may imply that the Quaternary and Tertiary sedimentary processes were continuously affected by reworking of older sediments and subsequent resegmentation. The changes of the sediment color, peak pattern of minerals and presence of reworked microfossils at the unit boundaries have been interpreted as evidence of authigenic formation. Mineralogical characteristics of the sediments in study area strongly indicates changes in paleoenvironments through geologic time, including changes in post-depositional conditions by physical processes and chemical mechanisms.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31
• /
• pp.36-44
• /
• 1998

우리 나라에서 토양의 점토광물에 관한 최초의 연구는 1958년 김제지방의 답 토양에 관한 연구로 (Dewan, 1958)시작되었다. 1960년대 시작하여 1970년대 까지는 주로 토양점토광물의 동정이 이루어 졌다. 점토광물의 동정(同定)에 사용된 잔적토(殘積土)(Residual Soil)로는 화강암(花崗岩), 화강편마암(花崗片麻岩), 현무암(玄武岩), 석회암(石灰岩), 혈암(頁岩), 제(第)3기층(紀層), 홍적층(洪積層) 유래 토양과 토양종류별(土壤種類別)로는 과부식회색토(寡腐植灰色土), 염류토(鹽類土), 충적토(沖積土), 적황색토(赤黃色土), 화산회토(火山灰土), 퇴적토(堆積土), 갈색토(褐色土), 암쇄토(岩碎土), 저위생산답(低位生産畓)이였으며, 토양점토광물(土壤粘土鑛物)과 작물수량성(作物收量性) 관계에 관한 연구가 실시되었다. 1980년대에 들어와서는 토양중의 1차광물과 점토광물의 풍화에 대한 안정도와 1차광물의 동정이 행해졌으며, 이밖에 Kaolinite 입자의 전하에 관한 연구등 점토광물의 흡착과 활성 연구, 점토광물의 토양개량재로서의 흡착과 화학적 특성 변화 연구와 점토광물의 토양개량 시용효과에 관한 연구가 행해졌다. 1990년대에 들어와서는 토양 중의 1차광물과 점토광물의 정량에 대한 자료가 축척되었고, 토양의 풍화에 대한 안정성과 생성기작, Zeolite와 새로운 광물이 합성되었다. 또한 합성광물을 이용한 농업과 산업광물로의 응용성 환경 산업에서의 적용가능성에 대한 평가가 시도되었다. 토양의 점토광물의 조성에 관한 연구는 토양 모재를 중심으로 이루어졌는데, 화강암(花崗岩)에서는 Halloysite, 화강편마암(花崗片麻岩)에서는 Kaolinite, Metahalloysite, Illite, 산성암(酸性岩)에서는 Kaolinite, Venrmiculite와 Chlorite의 중간광물, 현무암(玄武岩)에서는 Illite, Kaolinite, Vermiculite, 석회암(石灰岩)에서는 Vermiculite-Chlorite 중간광물, Kaolinite와 Illite, 혈암(頁岩)에서는 Kaolinite, Halloysite, Illite 외 Vermiculite-Chlorite, 화산회토(火山灰土)에서는 Allophane이 주광물이었다. Soil Taxonomy와 토양광물과의 관계에서, 답 토양에서는 Entisols의 주점토광물은 2:1형과 1:1형 광물이지만 Inceptisols와 Alfisols에서는 Halloysite가 대부분이다. 밭 토양의 경우는 Alfisols의 주점토광물은 Vermiculite, Illite, Kaolinite이었고, Ultisols에서는 Vermiculite-Chlorite 중간광물이었다. 산림토양에서는 Inceptisols중에서 Andept는 Allophane, Alfisols에서는 2:1 광물이지만, Ultisols에서는 Halloysite이다. 모재별 조암 광물의 풍화와 점토광물의 생성과정에서 화강암(花崗岩)과 화강편마암(花崗片麻岩)의 장석류(長石類)는 kaoline광물로, 이 밖의 운모광물(雲母鑛物), 녹니석(綠泥石), 각섬석(角閃石), 휘석(輝石)으로부터 생성된 illite, chlorite, vermiculite는 풍화중간에 혼층단계(混層段階)를 거쳐서 kaoline 광물로 풍화된다. 석회암(石灰岩) 토양의 smectite가 Mg농도가 높은 토양용액으로부터 침전되어 생성되었거나 운모 또는 chlorite에서 유래된 vermiculite의 변성작용에 의해 생성되고, 혈암(頁岩)토양의 점토에 illite가 주로 풍화에 저항성이 큰 미립자의 함수백운모(含水白雲母)로부터 유래되며, 현무암(玄武岩) 중의 장석류(長石類)는 kaoline광물로, 휘석(輝石)은 chlorite${\rightarrow}$illite의 풍화과정을 거친다. Zeolite, 함불석 Bentonite, Bentonite 등 우량점토 광물이 분포과 광물조성, 이화학적 특성이 조사되었고, 토양의 물리적, 화학적 성질의 개선을 필요로 하는 토양의 개량을 위해서 Bentonite, Zeolite, Vermiculite 등의 토양 개량재(改良材)로서의 기초연구와 이들 개량재 시용효과에 관한 연구 등이 주로 논토양에서 수행되었다. 점토광물과 수량관계를 보면 Montmorillonite를 주점토광물로 함유된 답 토양의 수도수량이 1:1 광물을 주점토광물로 함유하고 있는 토양에서의 수도수량 보다 높았다. 토양광물에 관한 기초연구(基礎硏究)로서 양이온교환능과 포화이온의 영향, 입자의 전기화학적 성질, 흡탈착 성질, 표면적과 등전점, 해성점토에 대한 압밀점토(壓密粘土)의 변형율(變形率)의 추정 등이 주로 연구되었다. 부가가치가 낮거나 폐기되는 광물을 이용하여 토양개량재 혹은 흡착제를 형성하는 연구가 알카리 처리에 의한 Zeolite 합성에 집중되었다.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.3
• /
• pp.271-281
• /
• 2008

The "Noerog", a traditional green mineral pigment occurs as veins or cavity-filings in the basaltic pyroclastic rocks of Quaternary Epoch in Mt. Noeseong in Janggi-myeon, Pohang. The "Noerog stone" mainly consists of celadonite with minor chlorite/smectite, mordenite and opal. Celadonite grains are several hundreds to several tens of ${\mu}m$ in size. The particle sizes under several tens of fm are likely to coagulate to aggregates. The coloring rate increases rapidly with decreasing particle size under $71{\mu}m$. The hiding power is maximum in the particle sizes of $0.2\sim0.3{\mu}m$. The resistance properties of the Noerog to both the light and the bacteria are absolutely superior to ordinary chemical pigments. The transparency of the Noerog is maximum in the nano-powders under 200 nm. Examination of the color of the Noerog pigment which has been prepared by traditional technique for "dancheong" shows that the best coloring effect is found in the particle sizes under $32{\mu}m$ and that the painting was not successful for the Noerog of particle size over $32{\mu}m$.

• Journal of the Mineralogical Society of Korea
• /
• v.5 no.2
• /
• pp.79-92
• /
• 1992

The Sarisan clay deposits of hydrothermal origin are found in the intensely weathered wto-mica granite in Yeoju area. The major clay minerals of the Sarisan mine are illite and montmorillonite with minor disordered kaolinite, vermiculite, and some interstratified mineral. Clay minerals were studied using various methods including X-ray diffraction, infrared absorption spectroscopy, electron microscopy, and thermal and chemical analyses. Illites occur as discrete illite or highly illitic interstratified mineral. They are of 1M and $2M_1$ polytypes and characterized by a low lattice charge (1.768-0.926 per unit formula), low $K^+$ content (0.741-0.902 per unit formula), and high Si/Al ratio (1.154-1.293) as compared with muscovite. Montmorillonites are highly negative charged and occasionally random-interstratified as I/S with 80-98% smectite. Hydrothermal alteration is more important than later weathering alteration for the formation of illite and montmorillonite clay minerals. The hydrothermal alteration took place through two stages; the formation of illite in the early stage and the formation of montmorillonite in the late stage. Disordered kaolinite and vermiculite are the weathering products of plagioclase and biotite, respectively.

• The Journal of Engineering Geology
• /
• v.8 no.2
• /
• pp.175-188
• /
• 1998

This paper describes the internal structures and K-Ar ages of fault gouges collected from the Dongnae fault zone. This fault zone is internally zoned and occurs in the multiple fault cores. A fault core consists of thin gouge and narrow cataclastic zones that are bounded by a much thicker damage zone. Intensity of deformation and alteration increases from damage zone through cataclastic zone to gouge zone. It is thought that cataclasis of brittle deformation was the dominant strain-accomodation mechanism in the early stage of deformation to form the gouge zone and that crushed materials in the regions of maximum localization of fault slip subsequently moved by cataclastic flow. Deformation mechanism drastically changed from brittle processes to fluid-assisted flow along the gouge zone as the high porosity and permeability of pulverzied materials during faulting facilitated the influx of the hydrothermal fluids. Subsequently, the fluids reacted with gouge materials to form clay minerals. Fracturing and alteration could have repeatedly taken place in the gouge zone by elevated fluid pressures generated from the reduction of pore volume due to the formation of clay minerals and precipitation of other materials. XRD analysis revealed that the most common clay minerals of the gouge zones are illite and smectite with minor zeolite and kaolinite. Most of illites are composed of 1Md polytype, indicating the products of hydrothermal alteration. The major activities of the Dongnae fault can be divided into two periods based upon K-Ar age data of the fault gouges : 51.4∼57.5Ma and 40.3∼43.6Ma. Judging from the enviromental condition of clay mineral formation, it is inferred that the hydrothermal alteration of older period occured at higher temperature than that of younger period.

• Journal of the Mineralogical Society of Korea
• /
• v.20 no.3
• /
• pp.203-212
• /
• 2007

Mineral compositions of 89 Yellow Sea surface sediments collected at the second cruise in 2001, were determined using the high resolution X-ray diffractometer and Siroquant v.3.0 program. Yellow Sea surface sediments are composed of major minerals (quartz 57.8%, plagioclase 16.0% and alkali feldspar 10.0%), clay minerals, and calcite. Illite (8.7%) is the most abundant clay mineral, chlorite (2.6%) is the second, and kaolinite (0.6%) is few. however smectite is not detected. Quartz content is very high around the margin of the Yellow Sea, however is very low along the northwest to southeast direction extending from southeast of Sandong Peninsula to southwest of Jeju Island. It has similar distribution pattern with that of coarse sediment (sand). The coarse sediment, is mainly consisted of quartz, may be much supplied from the eastern part and southwestern part of the Yellow Sea. Illite distribution pattern is opposite to that of quartz. It is similar to those of clay and mud particles, therefore it can be suggested that fine sediment may be largely supplied from the northwestern part of the Yellow Sea. It is necessary to continue this kind of investigation, because it is difficult to interpret the sediment provenance of the Yellow Sea only from the result of this study.

• Journal of the Korean earth science society
• /
• v.24 no.8
• /
• pp.657-667
• /
• 2003

Deep-drilled core sampling and high-resolution seismic survey were carried out to identify a Holocene-late Pleistocene boundary in Gyeonggi Bay, western coast of Korea. Analysis of core sections revealed the existence of an oxidized and semi-consolidated sediment layer, Iying immediately below a Holocene horizon (Unit I) and being developed at the top of a late Pleistocene deposit (Unit II). The oxidized sedimentary layer (uppermost part of Unit II) is characterized by semi-consolidated, yellowish sediments showing signs of desiccation and alteration such as high N value, low water content, periglacial cryogenic structure, depletion of smectite, and high geochemical weathering index (Ba/Sr ratio). This feature, together with radiocarbon ages, suggests that the layer has formed as a result of prolonged subaerial exposure of Unit II sediments during the late Wisconsin sea-level lowstand, producing a regional unconformity. Such unconformitic-bounding surface corresponds to a prominent near-surface reflector (R), which is observed in seismic profiles obtained across the drilled-core sections in the study area. Consequently, the buried oxidized-sedimentary layer associated with the seismic reflector possibly plays a key horizon for the understanding of late Quaternary environmental changes as well as evidence of the emergence of the Yellow Sea shelf during the late Wisconsin sea-level lowstand.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.4
• /
• pp.335-348
• /
• 2016

The fluvial Tamna Formation, consisting of conglomerate, sandstone and mudstone layers, is widely distributed in Jeiu Island. Various sizes of quartz crystals were identified from most of the Tamna Formation, including the mudstone layer. XRD analysis also shows that the mudstone layer is composed of various minerals, quartz, plagioclase, K-feldspar, mica, magnetite, hematite, olivine, amphibole, gibbsite, calcite, analcime and clay minerals such as illite, kaolinite, vermiculite, smectite, chlorite, $10{\AA}$-halloysite. There is a tendency showing that the more amount of kaolinite, vermiculite, and chlorite is present where the more amount of quartz crystals is present. It is likely that the main source materials contributing to the Tamna Formation were from the parental rocks containing abundant quartz grains, suggesting that the Tamna Formation could not be related to Jeju volcanic rocks, but possibly to pre-existing basement rocks. Thus, we propose that the Tamna Formation was formed from the materials derived from both pre-existing basement rocks and Jeju volcanic rocks, which were subsequently affected by diagenesis, hydrothermal alteration and weathering process.