• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1120-1125
• /
• 2001

A new concept of piezoelectric smart panels for noise reduction in wide band frequencies is proposed and their possibility is experimentally investigated. Multi-mode damping is studied by using a newly proposed tuning method. The proposed panels are based on passive shunt damping methods. This method is based on electrical impedance model and maximizing the dissipated energy at the shunt circuit. four PZT are attached on smart panel for improving performance of transmission noise reduction. 0 prove the concept of piezoelectric smart panels, an acoustic measurement experiment was performed. The smart panels exhibit a good noise reduction in middle and high frequency ranges due to the mass effects of absorbing materials or/and the air gap. The use of piezoelectric smart panel renders noise reduction at resonance frequency. Noise reduction at multiple resonance frequencies is experimentally investigaed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1273-1279
• /
• 2000

A new concept of piezoelectric smart panels for noise reduction in wide band frequencies is proposed and their possibility is experimentally investigated. The proposed panels are based on active and passive methods. They use piezoelectric smart structure technology for active noise reduction at low band frequencies and passive sound absorbing materials for mid-range of noise frequencies. To prove the concept of piezoelectric smart panels, an acoustic measurement experiment was performed. The smart panels exhibit a good noise reduction in middle and high frequency ranges due to the mass effects of absorbing materials or/and the air gap. The use of piezoelectric smart panel renders noise reduction large at resonance frequency. Another concept of smart panel that uses piezoelectric damping is experimentally investigated. Since piezoelectric dampings can reduce vibration and noise at resonance frequencies with simple shunt circuit, they have merits in terms of economy and simplicity. Dissipated energy method(DEM) is adopted to tune the shunt circuit precisely in piezoelectric dampings. Noise reduction at multiple resonance frequencies is demonstrated.

• 한국산학기술학회논문지
• /
• 제2권2호
• /
• pp.73-79
• /
• 2001

압전재료를 이용한 지능패널의 전달음 저감성능을 실험적으로 연구하였다. 제안된 압전지능패널은 압전 감지기와 작동기가 부착되어 있는 주구조물에 흡음재가 한 쪽면에 부착된 구조이다. 이는 저주파에서 능동적 방법과 고주파에서 수동적방법을 혼용한 개념이다. 이 개념을 증명하기 위하여 음향실험을 수행하였다. 음향실험을 위하여 음향터널을 설계, 제작하여 음향특성을 실험하였다. 음향 특성실험을 통하여 800 Hz가지 평면파특성을 나타내었다. 단일패널에 흡음재를 부착한 지능패널은 첫번째 공진주파수영역을 제외한 중주파수영역에서 뚜렸한 소음저감성능을 나타내었다. 첫번째 공진주파수에 대하여 반전회로를 이용한 능동제어를 수행하여 약 10 dB소음저감을 이루었다. 또한, 공기층을 갖는 이중지능패널에 대한 실험을 통하여 공진주파수에서 뿐만 아니라 넓은 영역에서 좋은 소음저감성능을 보였다. 수동적 방법과 능동적 방법을 혼용한 압전지능패널은 넓은 주파수 영역에서의 소온저감대책으로 유망한 기술이다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.327.2-327
• /
• 2002

In this paper, the transmitted noise reduction of smart panels of which passive piezoelectric shunt damping is used, is experimentally studied. Shunt damping experiments are based on the measured electrical impedance model. A passive shunt circuit composed of inductor, and load resistor is devised to dissipate the maximum energy into the joule heat energy For multi mode shunt damping, the shunt circuit is redesigned by adding a blocking circuit. (omitted)

• 한국소음진동공학회논문집
• /
• 제13권4호
• /
• pp.300-307
• /
• 2003

This paper presents the multi-mode noise reduction of smart panels of which passive piezoelectric shunt damping is introduced. For the piezoelectric shunt damping, a passive shunt circuit composed of inductors and a load resistor is connected to the piezoelectric patch mounted on the panel structure. An electrical impedance model is introduced for the system based on the measured electrical impedance, and the criteria for maximum energy dissipation at the shunt circuit is used to find the optimal shunt parameters. For multi-mode shunt damping, the shunt circuit is modified by the introduction of a block circuit. Also the optimal location of the piezoelectric patch is studied by finite element analysis in order to cause the maximum admittance from the patch for each mode of the structure. An acoustic test is performed for the panels and a remarkable noise reduction is obtained in multiple modes of the panel structure.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.216-221
• /
• 2002

In this paper, the transmitted noise reduction of smart panels of which passive piezoelectric shunt damping is used, is experimentally studied. Shunt damping experiments are based on the measured electrical impedance model. A passive shunt circuit composed of inductors, and a load resistor is devised to dissipate the maximum energy into the joule heat energy. For multi-mode shunt damping, the shunt circuit is redesigned by adding a blocking circuit. Also the optimal location of the piezoelectric patch is studied by FEM in order to cause the maximum admittance from the patch for each mode of aluminum plate. In results, the transmitted sound pressure level of panels is efficiently reduced for multi-modes

• Smart Structures and Systems
• /
• 제20권5호
• /
• pp.637-640
• /
• 2017

The adoption of cladding panels as dissipation device is a sort of passive control "ante litteram" for residential and commercial buildings. This paper gives details on the current technology outlining the difference between buffer panels and cladding panels. The discussion of robustness and resilience of the resulting system is afforded. It is shown that the strength of such solution, originally related to economy and light weight, is mainly associated with the respect of the main robustness requisites, as well as the short time it requires for removal and replacement (resilience).

• 한국산학기술학회논문지
• /
• 제3권1호
• /
• pp.49-57
• /
• 2002

안전감쇠에 의해 전달 소음을 저감시키는 압전지능패널에 대한 실험적 연구를 수행하였다. 압전지능패널은 기본적으로 압전재료를 부착한 평판 구조물에 션트회로를 연결하고 흡음재들을 부가한 구조물이다. 지능패널은 중 주파수영역에서 흡음재의 수동적 특성을 이용하고 저주파수영역의 공진주파수에서는 압전감쇠를 적용하여 소음저감을 이루는 개념이다. 저주파공진에서의 소음저감을 위하여 측정한 전기적임피던스모델을 이용하는 압선감쇠를 적용하였다. 압전감쇠를 위한 공진 션트회로는 직렬로 연결된 저항과 인넉터로 구성되었으며, 저항과 인덕터는 회로에서 소산되는 에너지가 최대가 될 수 있는 값으로 최적설계하였다. 압전지능패널의 전달 소음저감성능은 음향터널을 사용하여 실험을 수행하였다. 음향터널은 사각단면 형태이며 소음 원으로 터널의 한 쪽 끝에 스피커가 설치되었다. 패널들을 터널의 중앙에 설치하여 투과 음압을 측정하였다. 흡음재를 갖는 지능패널과 흡음재와 공기층을 갖는 압전이중지능패널은 수동적 특성에 의해 저주파영역의 공진주파수를 제외한 중 주파수영역에서 뚜렷한 소음저감 효과를 나타내었다. 압전감쇠를 통하여, 첫 번째 공진주파수에서 약 10dB, 8dB의 소음저감 효과를 얻었다. 압전감쇠와 수동특성을 혼용하는 압전지능패널은 넓은 주파수영역에서의 소음저감을 위한 유망한 기술이다.

• Steel and Composite Structures
• /
• 제14권6호
• /
• pp.587-604
• /
• 2013

There are few technical documents regulated structural performance and engineering criteria in domestic market for Structural insulated panels in Korea. This paper was focused to identify fundamental performance under monotonic loading and cyclic loading for SIPs in shear wall application. Load-displacement responses of total twelve test specimens were recorded based on shear stiffness, strength, ultimate load and displacement. Finally energy dissipation of each specimen was analyzed respectively. Monotonic test results showed that ultimate load was 44.3 kN, allowable shear load was 6.1 kN/m, shear stiffness was 1.2 MN/m, and ductility ratio was 3.6. Cyclic test was conducted by two kinds of specimens: single panel and double panels. Cyclic loading results, which were equivalent to monotonic loading results, showed that ultimate load was 45.4 kN, allowable shear load was 6.3 kN/m. Furthermore the accumulated energy dissipation capability for double panels was as 2.3 times as that for single panel. Based on results of structural performance test, it was recommended that the allowable shear load for panels should be 6.1 kN/m at least.

• 한국음향학회지
• /
• 제21권2호
• /
• pp.150-159
• /
• 2002

광대역 소음저감을 위한 압전지능패널에 대한 실험적 연구를 수행하였다. 압전지능패널은 기본적으로 압전재료를 부착한 평판구조물에 션트회로를 연결하고 흡음재들을 부가한 구조물이다. 압전감쇠와 수동적 특성을 혼용하여 중 주파수영역에서 흡음재의 수동적 특성을 이용하고 저주파수 영역의 공진주파수에서는 압전감쇠를 적용하여 소음저감시키는 개념이다. 저주파수 공진에서의 소음저감을 위하여 측정한 전기적 임피던스 모델을 이용하는 압전감쇠를 적용하였다. 압전감쇠를 위한 공진 션트회로는 직렬로 연결된 저항과 인덕터로 구성되었으며, 저항과 인덕터는 회로에서 소산되는 에너지가 최대가 될 수 있는 값으로 최적설계하였다. 압전지능패널의 전달소음저감 성능은 음향터널을 사용하여 실험을 수행하였다. 음향터널은 사각단면 형태이며 소음원으로 터널의 한 쪽 끝에 스피커가 설치되었다. 패널들을 터널의 중앙에 설치하여 투과 음압을 측정하였다. 흡음재와 공기층을 갖는 압전이중지능패널은 수동적 특성에 의해 저주파수 영역의 공진주파수를 제외한 중주파수 영역에서 뚜렷한 소음저감 효과를 나타내었다. 압전감쇠를 통하여, 공진주파수에서의 좋은 소음저감을 얻었다. 압전감쇠와 수동적 방법을 혼용하는 압전지능 패널은 넓은 주파수 영역에서의 소음저감을 위한 유망한 기술이다.