• Therapeutic Science for Rehabilitation
• /
• v.10 no.2
• /
• pp.95-108
• /
• 2021

Objective : This study aimed to develop prototypes of "smart stacking cones" by combining ICT to evaluate and train the upper extremity function and dual task performance in patients with central nervous system impairment, and to identify the complementary point to the completion of the device through a usability test. Methods : This prototype comprised of a hardware and software system that enabled the evaluation and training of patients and the management of data obtained from patients' performance. Specific measurement variables were established so that patient performance could be measured correctly. Based on the measurement variables, a the prototype included a 'single task evaluation modes', 'dual task evaluation mode', 'single task training mode', and 'dual task training modes'. Additionally, a usability test was conducted to assess clinical applicability and overall satisfaction for the prototype. Results : The results of the usability test were generally found to be appropriate. The 'content adequacy' in the usability test was the area with the highest level of adequacy and the lowest level of inadequacy. Additionally, overall 'satisfaction' in the usability test was the area with the highest appropriate and inappropriate levels. Hence, the overall satisfaction results were unstable. Conclusion : Future studies should be conducted to identify the clinical effectiveness of the device by applying an upgraded smart stacking cone to an actual patient group.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.815-817
• /
• 2014

According to a rapid development of medical technology and increasing requirements of the users on prevention and control of diseases, whole healthcare services are changing into user-oriented services. There are many attempts and studies on integrating users' medical information but it is so difficult to implement a true user-oriented medical services because carrying the information from each medical facility to the integrated medical information system involves many conflicts of interests and authentication problems. This paper presents integrated medical information system which provides real-time medical services, allowing the users to be a critical player who can receive the medical information they want from any medical facility on their mobile devices without any change in the form of documents in relation to those issued by that facility and give that information themselves to the system through the mobile devices.

• Journal of Industrial Convergence
• /
• v.21 no.1
• /
• pp.175-185
• /
• 2023

Recently, novel viral infections such as COVID-19 have spread and pose a serious public health problem. In particular, these diseases have a fatal effect on the elderly, threatening life and causing serious social and economic losses. Accordingly, applications such as telemedicine, healthcare, and disease prevention using the Internet of Things (IoT) and artificial intelligence (AI) have been introduced in many industries to improve disease detection, monitoring, and quarantine performance. However, since existing technologies are not applied quickly and comprehensively to the sudden emergence of infectious diseases, they have not been able to prevent large-scale infection and the nationwide spread of infectious diseases in society. Therefore, in this paper, we try to predict the spread of infection by collecting various infection information with regional limitations through a virus disease information collector and performing AI analysis and severity matching through an AI broker. Finally, through the Korea Centers for Disease Control and Prevention, danger alerts are issued to the elderly, messages are sent to block the spread, and information on evacuation from infected areas is quickly provided. A realistic elderly support system compares the location information of the elderly with the information of the infected area and provides an intuitive danger area (infected area) avoidance function with an augmented reality-based smartphone application. When the elderly visit an infected area is confirmed, quarantine management services are provided automatically. In the future, the proposed system can be used as a method of preventing a crushing accident due to sudden crowd concentration in advance by identifying the location-based user density.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.86-92
• /
• 2022

Recently, the bio-healthcare market is enlarging worldwide due to various reasons such as the COVID-19 pandemic. Among them, biometric measurement and analysis technology are expected to bring about future technological innovation and socio-economic ripple effect. Existing systems require a large-capacity battery to drive signal processing, wireless transmission part, and an operating system in the process. However, due to the limitation of the battery capacity, it causes a spatio-temporal limitation on the use of the device. This limitation can act as a cause for the disconnection of data required for the user's health care monitoring, so it is one of the major obstacles of the health care device. In this study, we report the concept of a standalone healthcare monitoring module, which is based on both triboelectric effects and electromagnetic effects, by converting biomechanical energy into suitable electric energy. The proposed system can be operated independently without an external power source. In particular, the wireless foot pressure measurement monitoring system, which is rationally designed triboelectric sensor (TES), can recognize the user's walking habits through foot pressure measurement. By applying the triboelectric effects to the contact-separation behavior that occurs during walking, an effective foot pressure sensor was made, the performance of the sensor was verified through an electrical output signal according to the pressure, and its dynamic behavior is measured through a signal processing circuit using a capacitor. In addition, the biomechanical energy dissipated during walking is harvested as electrical energy by using the electromagnetic induction effect to be used as a power source for wireless transmission and signal processing. Therefore, the proposed system has a great potential to reduce the inconvenience of charging caused by limited battery capacity and to overcome the problem of data disconnection.

• International Journal of Computer Science & Network Security
• /
• v.21 no.8
• /
• pp.267-275
• /
• 2021

Smart application is developed in this paper by using an android-based platform to automatically determine the human emergency state (Lifesaver) by using different technology sensors of the mobile. In practice, this Lifesaver has many applications, and it can be easily combined with other applications as well to determine the emergency of humans. For example, if an old human falls due to some medical reasons, then this application is automatically determining the human state and then calls a person from this emergency contact list. Moreover, if the car accidentally crashes due to an accident, then the Lifesaver application is also helping to call a person who is on the emergency contact list to save human life. Therefore, the main objective of this project is to develop an application that can save human life. As a result, the proposed Lifesaver application is utilized to assist the person to get immediate attention in case of absence of help in four different situations. To develop the Lifesaver system, the GPS is also integrated to get the exact location of a human in case of emergency. Moreover, the emergency list of friends and authorities is also maintained to develop this application. To test and evaluate the Lifesaver system, the 50 different human data are collected with different age groups in the range of (40-70) and the performance of the Lifesaver application is also evaluated and compared with other state-of-the-art applications. On average, the Lifesaver system is achieved 95.5% detection accuracy and the value of 91.5 based on emergency index metric, which is outperformed compared to other applications in this domain.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1556-1564
• /
• 2011

The increased life expectancy of human due to the advance of medical techniques has led to many social problems such as rapidly aging populations, increased medical expenses and a lack of medical specialists. Thus, studies on improving the quality of life with the least amount of expense have been going on by incorporating advanced technologies, especially for Personal Health Devices (PHDs), into the medical service market. However, compatibility and extensibility among manufacturers of PHDs have not been taken into account in most of the researches done on the development of PHDs because most of them have been supported by individual medical organizations. The interoperability among medical organizations can not be guaranteed because each medical organization uses different format of the messages. Therefore, in this paper, an expansion module that can enable commercially-available non-standard PHDs to support the IEEE 11073, and a smart-phone-based manager that can support easy and comprehensive management on receiving and transmitting the collected data from each PHD using IEEE 11073 standard were developed. In addition, a u-health system that can transmit the data collected in the manager using the standard data format HL 7 to medical center for real-time medical service from every medical institutions that support this standard was designed and developed.

• Advances in Computational Design
• /
• v.4 no.2
• /
• pp.73-90
• /
• 2019

The growth in the number of single-member households is a critical issue worldwide, especially among the elderly. For those living alone, who may be unaware of their health status or routines that could improve their health, a continuous healthcare monitoring system could provide valuable feedback. Assessing the performance adequacy of activities of daily living (ADL) can serve as a measure of an individual's health status; previous research has focused on determining a person's daily activities and extracting the most frequently performed behavioral patterns using camera recordings or wearable sensing techniques. However, existing methods used to extract common patterns of an occupant's activities in the home fail to address the spatio-temporal dimensions of human activities simultaneously. Though multiple sequence alignment (MSA) offers some advantages - such as inherent containment of the spatio-temporal data in sequence format, and rapid identification of hidden patterns - MSA has rarely been used to extract in-home ADL routines. This research proposes a method to extract a household occupant's ADL routines from a cumulative spatio-temporal data log of occupancy collected using a non-intrusive method (i.e., a tomographic motion detection system). The findings from an occupant's 28-day spatio-temporal activity log demonstrate the capacity of the proposed approach to identify routine patterns of an occupant's daily activities and to reveal the order, duration, and frequency of routine activities. Routine ADL patterns identified from the proposed approach are expected to provide a basis for detecting/evaluating abrupt or gradual changes of an occupant's ADL patterns that result from a physical or mental disorder, and can offer valuable information for home automation applications by enabling the prediction of ADL patterns.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.1
• /
• pp.25-30
• /
• 2024

Smart City, a key application area of the AIoT (Artificial Intelligence of Things), provides various services in safety, security, and healthcare sectors through location tracking and location-based services. an IPS (Indoor Positioning System) is required to implement location-based services, and wireless communication technologies such as WiFi, UWB (Ultra-wideband), and BLE (Bluetooth Low Energy) are being applied. BLE, which enables data transmission and reception with low power consumption, can be applied to various IoT devices such as sensors and beacons at a low cost, making it one of the most suitable wireless communication technologies for indoor positioning. BLE utilizes the RSSI (Received Signal Strength Indicator) to estimate the distance, but due to the influence of multipath fading, which causes variations in signal strength, it results in an error of several meters. In this paper, we conducted research on a path loss model that can be applied to BLE IPS for proximity services, and confirmed that optimizing the free space propagation loss coefficient can reduce the distance error between the Tx and Rx devices.

• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.29-40
• /
• 2022

This study uses the bidet 4D double diamond design process model to propose an improvement for "senior-oriented bidet product service design" that reflects the characteristics and needs of seniors. This study was based on the product service system concept. To this end, qualitative research on seniors was conducted to derive user value factors, and, based on this, product service ideas were discovered, and a prototype reflecting the usefulness review of a working-level expert group was proposed. First, a "smart application service for user-customized function setting guide" was proposed. A bidet incorporating Internet of Things technology and a smart phone are linked to provide an app service that automatically interprets user characteristic information and information on bidet products to guide customized functions. Second, a control panel and remote control user interface to "user-oriented product service interface" was proposed. In consideration of the usability and cognitive ability of seniors, a simple and intuitive physical user interface such as a configuration centered on main functions, button arrangement according to task sequence, and a touch screen remote control was presented. Third, we proposed a "bidet care service linked with products and health/hygiene care" that provides a wide range of services such as user health and hygiene, cleanliness, entertainment, etc., in addition to regular bidet product service. This study proposed a product-based service design methodology that can improve user experience and relationship quality by discovering and improving the pain points and needs of users (seniors) in the process of using bidet products (before, during, and after use).

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.77-83
• /
• 2019

With the increase in population, the number of such senior citizens is increasing day by day. These senior citizens have a variety of care needs, but there are not enough health workers to look after them. Ambient Assisted Living (AAL) aims at ensuring the safety and health quality of the older adults and extending the number of years the senior citizens can live independently in an environment of their own preference. AAL provides a system comprising of smart devices, medical sensors, wireless networks, computer and software applications for healthcare monitoring. AAL can be used for various purposes like preventing, curing, and improving wellness and health conditions of older adults. While information security and privacy are critical to providing assurance that users of AAL systems are protected, few studies take into account this feature. In this paper, we propose a secure and lightweight authentication scheme for the AAL systems. The proposed authentication scheme not only supports several important security requirements needed by the AAL systems, but can also withstand various types of attacks. Also, the security analysis results are presented to show the proposed authentication scheme is more secure and efficient rather than existing authentication schemes.