• 비파괴검사학회지
• /
• 제35권1호
• /
• pp.39-45
• /
• 2015

지능형 센서 기반의 구조 건전성 감시를 통해 안전성을 확보하기 위한 연구는 우주항공을 비롯하여 기계/토목 구조물, 수송 기계 분야로 확대되었다. 특히, 실시간으로 운용되는 구조물은 사고로 인한 재산 및 인명 피해를 예방하기 위해 여러 스마트 센서 기반의 구조 건전성 감시 기술이 요구되는 결과로 이어졌다. 한편, 상용화되어 있는 대부분의 센서는 전자기 기반의 센서로써 전자기 간섭 및 부식과 같은 적용성의 제한과 환경적 요인에 취약할 수 있다. 따라서, 전자기 기반 센서의 단점을 보완하기 위한 신개념 센서로 광섬유 센서가 최근 각광을 받고 있다. 하지만, 광섬유 센서를 이용한 실제 구조물의 감시를 위해서는 고가 장비와 시스템이 요구되어 어려움이 존재한다. 따라서, 본 연구에서는 한 가닥의 광섬유를 이용하여 여러 지점에서 발생할 수 있는 충격을 검출하는 센서 시스템을 제안하였다. 이를 위해, 광섬유 굽힘 손실 현상을 이용하여 같은 충격에 대해 위치별 광 강도의 변화량 차이가 존재하도록 센서부의 모듈을 제작하였다. 그리고, 광 강도 변화에 영향을 미치는 변수들을 이용하여 실험 설계를 하였으며, 충격 위치 검출이 가능함을 실험적으로 검증하였다.

• 한국인터넷방송통신학회논문지
• /
• 제18권6호
• /
• pp.33-41
• /
• 2018

스마트 캠퍼스의 플랫폼으로 사물 인터넷에 대한 아이디어가 점점 대중화되고 있다. 인터넷에 연결하기 위해 통신 네트워크, 센서 노드 및 게이트웨이로 구성된 인프라가 필요하며 각 센서 노드는 환경에서 데이터를 수집할 수 있다. 본 논문은 스마트 캠퍼스 모니터링을 적용하기 위해 인터넷에 구성한 무선 센서 네트워크를 설명한다. 무선 센서 네트워크 모니터링은 저전력 구현 및 통합 시스템을 사용하는 완벽한 솔루션이다. 그러나 제한된 컴퓨팅 범위, 제한된 컴퓨팅 성능, 네트워크 프로토콜의 가용성 부족, 프로그래밍 보안 부족 및 기밀성, 무결성 및 가용성 분야의 보안 오류로 인해 수많은 제약이 있다. WSNM 노드를 위한 새로운 보안 기술과 기능이 개발되었다. 보안 네트워크 연구 개발 및 서비스 거부 (DOS) 및 복잡성 공격 방지를 위한 시스템을 제안하였다. 이러한 시스템이 제대로 구현되면 사전 할당을 통한 에너지 효율성 메커니즘과 안전한 루틴 알고리즘을 통해 핵심 관리 모델의 새로운 키를 제공 할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1205-1210
• /
• 2004

The 4-20mA analog signal used in the various industrial fields to interface sensor in distributed process control has been replaced with relatively simple digital networks, called "fieldbus, and recently by Ethernet. Significant advances in Internet and computer technology have made it possible to develop an Internet based control, monitoring, and operation scheduling system for heating, ventilation and air-conditioning (HVAC) systems. The seamless integration of data networks with control networks allows access to any control point from anywhere. Field compatible field devices become so-called "smart" devices, capable of executing simple control, diagnostic and maintenance functions and providing bidirectional serial communication to higher level controller. The most important HVAC of BAS has received nationwide attention because of higher portion of more than 40% in building sector energy use and limited resources. This paper presents the Internet-based monitoring and control architecture and development of LonWorks control modules for AHU (air handling units) of HVAC in viewpoint of configuring BAS network. This article addresses issues in architecture section, electronics, embedded processors and software, and internet technologies.

• Smart Structures and Systems
• /
• 제20권1호
• /
• pp.43-52
• /
• 2017

Structural health monitoring has drawn great attention in the field of civil engineering in past two decades. These structural health monitoring methods evaluate structural integrity through high-quality sensor measurements of structures. Due to electronic deterioration or aging problems, sensors may yield biased signals. Therefore, the objective of this study is to develop a fault detection method that identifies malfunctioning sensors in a sensor network. This method exploits the autoregressive modeling technique to generate a bank of Kalman estimators, and the faulty sensors are then recognized by comparing the measurements with these estimated signals. Three types of faults are considered in this study including the additive, multiplicative, and slowly drifting faults. To assess the effectiveness of detecting faulty sensors, a numerical example is provided, while an experimental investigation with faults added artificially is studied. As a result, the proposed method is capable of determining the faulty occurrences and types.

• Smart Structures and Systems
• /
• 제6권2호
• /
• pp.135-146
• /
• 2010

This paper presents the perspective of the Structural Mechanics program of the Air Force Office of Scientific Research (AFOSR) on the damage assessment of structures for the period 2006-2009 when the author was serving as Program Manager at AFOSR. It is found that damage assessment of structures plays a very important role in assuring the safety and operational readiness of US Air Force fleet. The current fleet has many aging aircraft, which poses a considerable challenge for the operators and maintainers. The nondestructive evaluation technology is rather mature and able to detect damage with considerable reliability during the periodic maintenance inspections. The emerging structural health monitoring methodology has great potential, because it will use on-board damage detection sensors and systems, will be able to offer on-demand structural health bulletins. Considerable fundamental and applied research is still needed to enable the development, implementation, and dissemination of structural health monitoring technology.

• Smart Structures and Systems
• /
• 제5권2호
• /
• pp.139-152
• /
• 2009

Globally, civil infrastructures are deteriorating at an alarming rate caused by overuse, overloading, aging, damage or failure due to natural or man-made hazards. With such a vast network of deteriorating infrastructure, there is a growing interest in continuous monitoring technologies. In order to provide a true distributed sensor and control system for civil structures, we are developing a Structural Nervous System that mimics key attributes of a human nervous system. This nervous system is made up of building blocks that are designed based on mechanoreceptors as a fundamentally new approach for the development of a structural health monitoring and diagnostic system that utilizes the recently developed piezo-fibers capable of sensing and actuation. In particular, our research has been focused on producing a sensory nervous system for civil structures by using piezo-fibers as sensory receptors, nerve fibers, neuronal pools, and spinocervical tract to the nodal and central processing units. This paper presents up to date results of our research, including the design and analysis of the structural nervous system.

• Smart Structures and Systems
• /
• 제20권2호
• /
• pp.175-180
• /
• 2017

The load-carrying capacity and structural behavior of concrete-filled steel tube (CFST) structures is highly influenced by the grouting compactness in the steel tube. Due to the invisibility of the grout in the steel tube, monitoring of the grouting progress in such a structure is still a challenge. This paper develops an active sensing approach with combined piezoceramic-based smart aggregates (SA) and piezoceramic patches to monitor the grouting compactness of CFST bridge structure. A small-scale steel specimen was designed and fabricated to simulate CFST bridge structure in this research. Before casting, four SAs and two piezoceramic patches were installed in the pre-determined locations of the specimen. In the active sensing approach, selected SAs were utilized as actuators to generate designed stress waves, which were detected by other SAs or piezoceramic patch sensors. Since concrete functions as a wave conduit, the stress wave response can be only detected when the wave path between the actuator and the sensor is filled with concrete. For the sake of monitoring the grouting progress, the steel tube specimen was grouted in four stages, and each stage held three days for cement drying. Experimental results show that the received sensor signals in time domain clearly indicate the change of the signal amplitude before and after the wave path is filled with concrete. Further, a wavelet packet-based energy index matrix (WPEIM) was developed to compute signal energy of the received signals. The computed signal energies of the sensors shown in the WPEIM demonstrate the feasibility of the proposed method in the monitoring of the grouting progress.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2235-2239
• /
• 2003

The aim of this research is to study and develop enabling technologies for home healthcare device with ubiquitous network. The motivation of this paper is to enable healthcare in home, to development the device for smart home health care. To achieve the aim, we must develop the prototype platform based on home gateways, distributed context user interface based on UPnP and support for information sharing with high speed power line communication and mobile infra-structures. And IPv6 is the base technology of this platform. In this paper, we concern that physical health, mental health and medical emergencies is all of home healthcare. With the smart device, we evaluate the connectivity, automatic information extraction and private data exchange and event driven message. The result of this paper is demonstration of smart device for ubiquitous communication in a healthcare application such as patient monitoring device and several information services. In conclusion, home healthcare will support more healthy and easy living for a human.

• 대한임베디드공학회논문지
• /
• 제11권5호
• /
• pp.287-298
• /
• 2016

This paper proposes an effective smart plug system capable of monitoring power, cutting off standby power and overload current. The key design concept is focused on measurement accuracy, self power consumption and controlling via smart phone application. The system is composed of several plugs and a hub, and adopts a star-topology-styled TDMA wireless protocol for communication between plug and hub. The test result shows that the implemented smart plug system meets K10026 regulation and is worth in electrical safety, energy saving, easy living.

• Journal of Information Processing Systems
• /
• 제17권6호
• /
• pp.1071-1082
• /
• 2021

Since the smart factory has been recently recognized as an industrial core requirement, various mechanisms to ensure efficient and stable operation have attracted much attention. This attention is based on the fact that in a smart factory environment where operating processes, such as facility control, data collection, and decision making are automated, the disruption of processes due to problems such as facility anomalies causes considerable losses. Although many studies have considered methods to prevent such losses, few have investigated how to effectively apply the solutions. This study proposes a Kubernetes based system applied in a smart factory providing effective operation and facility management. To develop the system, we employed a useful and popular open source project, and adopted deep learning based anomaly detection model for multi-sensor anomaly detection. This can be easily modified without interruption by changing the container image for inference. Through experiments, we have verified that the proposed method can provide system stability through nondisruptive maintenance, monitoring and non-disruptive updates for anomaly detection models.