• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2280-2285
• /
• 2011

As the prefecture railroad construction accelerates, unmanned system's reliability and safety is increasing in demand. Accordingly, effective management of construction projects for the PM and SE techniques are being applied, with the introduction and use of PMIS computerized systems. Due to the construction of railways, from the start of PMIS research planning, design, procurement, to construction and commissioning, various expertise is being carefully gathered, and by integrating it into the unified budget ideas and processes, rational, efficient, organized, and manageable financial plans are developed for the computerized system. However, the current PMIS does not take into account the life-cycle. This study is to bring attention to the BIM smart BOM-based configuration management for life-cycle through the consideration for railway construction project management.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.197-198
• /
• 2014

The concrete work of bridge decks is performed in a high place, which may reduce safety and productivity. In addition, the conventional method for deck forms require a great deal of manpower, and a form (sheathing) board is damaged when removed after curing. As a result, the concrete deck work of bridge construction becomes the cause of delayed construction and increased cost. To solve these problems, SMART form, a system form, is developed. SMART form is a temporary device for easier installation and removal, by mounting it to the lower flange of a bridge girder and using a mechanical behavior of the form system for deck concrete pouring. For stable installation and removal of the developed SMART form, geometric behaviors should be analyzed to prove its validity. Furthermore, the validity of geometric behaviors when the SMART form size is altered in response to the various arrangement of bridge girders should be proved. Thus, the study is intended to analyze the geometric validity of the form system for bridge deck concrete pouring. The structural stability of the form system for bridge deck concrete pouring can be secured, which will be applied in the field.

• 대한안전경영과학회지
• /
• 제13권2호
• /
• pp.31-42
• /
• 2011

Smart-Phones are utilized in disaster management field because it can deliver disaster information to large population simultaneously and quickly, and provide accurate information through situation-based service using the LBS(Location Based Service). To study on the utilization of smart phone for disaster information collection and dissemination method, this study suggest a framework which connects smart phone by loading application for reporting disaster. The disaster monitoring and situation dissemination system framework using smart phone is composed of 4 parts. First, smart phone application enters image, video, voice and text information and location of the disaster. Second, the disaster report reception and situation dissemination server receives the information, save in the DB, and send through smart phone SMS. Third, store into disaster information database. Fourth, display the disaster report and management information on 2D GIS, support the decision making process in deciding whether to manage as disaster, and disaster management web service which disseminates situation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.251-252
• /
• 2023

As technology improves with the 4th industrial revolution, smart construction is becoming a key part of safety management in the architecture and civil engineering. By using object detection technology with CCTV data, construction sites can be managed efficiently. In this study, super resolution technology based on deep learning is proposed to improve the accuracy of object detection in construction sites. As the resolution of a train set data and test set data get higher, the accuracy of object detection model gets better. Therefore, according to the scale of construction sites, different object detection models can be considered.

• 드라이브 ㆍ 컨트롤
• /
• 제21권1호
• /
• pp.1-7
• /
• 2024

The locking performance of a multi-plate clutch with a mechanical lock-up system is governed by the engagement algorithm. In this paper, a control algorithm to improve the locking performance of the clutch was studied. A 1D dynamic model was constructed and simulated according to the developed algorithm. The developed algorithm was composed of a method in which the locking device is engaged while generating artificial slip on the friction plate by controlling the piston pressure of the clutch. Furthermore, a case study of the parameters within the developed algorithm was conducted to explore combinations that maximize locking performance and analyze trends according to these parameters.

• Journal of Construction Engineering and Project Management
• /
• 제6권2호
• /
• pp.1-7
• /
• 2016

Construction in the UK is the second most dangerous industry in terms of fatal and minor injuries according to the 2014 report of HSE. The use of mobile devices such as iPad, Tablets and Smart phones on the live construction projects is also on the increase in the UK due to the 2016 - Level 2 BIM (Building Information Modelling) implementation target, set by the UK Government. Hence, the use of such devices may become a distraction from work activities on the construction sites and will cause a major risk to the end users. The subject of improving safety of BIM use is widely researched, but there is a gap in knowledge about the actual use of the mobile devices and perception of 'Site BIM', on the construction site activities. The main gap identified in the 'Site BIM' is the health and safety aspect of using such devices on the construction sites. A safer way of working with such devices needs to be identified to avoid any potential site hazards and fatalities before the widespread use of the devices are found on the construction projects. In that context, the paper is aimed to highlight the safety issues that are required to address for the successful implementation of the mobile devices for safer use of the 'Site BIM'. Questionnaire survey was used to collect the site information among construction professionals in the UK. The survey findings suggested that a proactive approach may be helpful to stop potential hazards and risks causing by the use of mobile devices and potential measures need to be identified before any injuries and incidents occur. The paper concludes that training, changing size of mobile devices and ensuring a separate induction training for 'Site BIM' tools will improve the health and safety of the end users of the mobile devices at the live construction sites.

• 한국건축시공학회지
• /
• 제23권5호
• /
• pp.571-581
• /
• 2023

최근 국내 건설산업은 건설업체의 경영난과 물량 감소로 인해 위축되고 있다. 국내 건설사들은 건설시장에서의 경쟁 우위 확보를 위해 모든 공종에 대해 원가절감 및 품질향상을 위한 노력을 기울이고 있다. 가치공학(VE) 기법은 건축공사에서 원가절감뿐만 아니라 공기 단축과 품질향상을 위한 도구로 활용되는데, 골조 공사 분야에 적용되는 성과가 상대적으로 미미한 실정이다. 공장 건설에서 골조 공사는 전체 공정에 큰 영향을 미치는 주요 공정이므로 골조 공사 계획단계에서 VE 기법을 도입해 설계도서와 현장 여건을 분석하여 품질과 안전을 확보하면서 공사 기간 단축, 원가절감, 작업성을 높일 수 있는 대안을 개발할 필요가 있다. 본 연구는 공기 단축, 원가절감, 시공 안전성 확보를 위한 기초연구가 될 것으로 기대된다.

• 한국건축시공학회지
• /
• 제22권5호
• /
• pp.519-530
• /
• 2022

인터넷 상거래가 증가함에 따라 전세계적으로 대형 물류 건물의 건설이 증가하고 있다. 이들 건축물은 대부분 장경간중재하의 특성을 가지고 있으며 빠른 시공을 위해 핀조인트 구조인 PC 공법을 적용한다. 그러나 핀조인트 구조는 시공 안전성 및 구조적 안정성으로 인해 PC 부재의 설치에 많은 제약이 있어 시간과 비용이 많이 소요된다. 이러한 제약과 문제점을 해결하기 위해 PC 부재 사이의 철골 조인트로 연결된 구조 프레임인 SMART frame이 개발되었다. SMART frame에 대한 많은 연구가 진행되었으나 공기 측면에 대한 영향은 분석되지 않았다. 본 연구의 목적은 장경간 중재하 물류창고시설에 대한 SMART frame의 공기단축 효과를 분석하는 것이다. 본 연구를 위해 기존 PC 공법에 의해 건설된 사례현장을 선정하여 SMART frame 설치 시뮬레이션과 시간 단축을 비교하였다. 그 결과, 기존 PC설치공기의 약48%의 수준으로 약 4개월이 단축 되었다. 추후 대형물류센터 프로젝트 진행 시 SMART frame을 적용한다면 기존 PC공법 대비 획기적인 공기단축의 효과를 가질 것으로 기대된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.385-386
• /
• 2013

• 대한안전경영과학회지
• /
• 제26권1호
• /
• pp.45-53
• /
• 2024

A Smart factories are systems that enable quick response to customer demands, reduce defect rates, and maximize productivity. They have evolved from manual labor-intensive processes to automation and now to cyber-physical systems with the help of information and communication technology. However, many small and medium-sized enterprises (SMEs) are still unable to implement even the initial stages of smart factories due to various environmental and economic constraints. Additionally, there is a lack of awareness and understanding of the concept of smart factories. To address this issue, the Cooperation-based Smart Factory Construction Support Project was launched. This project is a differentiated support project that provides customized programs based on the size and level of the company. Research has been conducted to analyze the impact of this project on participating and non-participating companies. The study aims to determine the effectiveness of the support policy and suggest efficient measures for improvement. Furthermore, the research aims to provide direction for future support projects to enhance the manufacturing competitiveness of SMEs. Ultimately, the goal is to improve the overall manufacturing industry and drive innovation.