• 산업경영시스템학회지
• /
• 제46권3호
• /
• pp.23-31
• /
• 2023

In this study, a smart bench was developed and researched smart benches that can contribute to user convenience and satisfaction by installing them in parks, bus stops, and tourist attractions in line with the rapidly changing construction of smart cities. The smart bench is automatically operated by the control system according to the external temperature and provides additional functions such as charging, lighting, and advertising to improve general bench functions as well as heating in winter and cooling in summer, making it suitable for smart urbanization. The developed smart bench is designed to be strong enough to withstand loads of about 2,500 N. It minimizes the visible parts such as assembled bolts and 220V power supply wires, It can also give aesthetic effects. The development was carried out with the aim of waterproofing and dustproofing of IP44 grade in accordance with the climate of Republic of Korea, which has four seasons, and it is advantageous for long-term use because the paint was selected for the weather ability (discoloration) grade 3 or higher. If smart bench is commercialized, it is believed that various options can be provided to the smart bench market, where buyers had few product options, as the parts were developed in an assembled type so that all functions can be responded in an optional form according to the installation environment and the buyer's budget.

• International Journal of Advanced Culture Technology
• /
• 제7권1호
• /
• pp.209-215
• /
• 2019

In order to provide a safe free-weight-training environment to people without workout trainers, we suggest a smart bench press machine with an automatic weight control system sensitive to user tiredness. Physical weight plates on the machine are replaced with a hydraulic cylinder as a press load and the cylinder knob is coupled with a step motor to change its tensile force automatically in-between lifting exercises. Three subjects participated to verify the usability of the smart bench press machine. They were asked to lift a 6-RM press load 10 times with 3 different lifting conditions: 1) no assistance, 2) a human assistance, and 3) the automatic weight control. All subjects were not able to complete the 10 sets without assistance due to tiredness, but they finished the full sets under the two assistive conditions. Average lifting speeds under the automatic weight control condition showed the most consistent level. Normalized quasi-tension data based on surface electromyogram signals of both Pectoralis Majors revealed that the subjects maintained the target muscle activation level above 50% but not more than 80% throughout the 10 sets. Therefore, the smart bench press machine is expected to both keep pace with the lifting exercise and reduce risk of injuries due to excessive muscle tensions.

• 한국콘텐츠학회논문지
• /
• 제17권6호
• /
• pp.1-8
• /
• 2017

본 논문에서는 스마트 시대에 맞게 기존 수준측량 장비를 개선한 스마트 수준측량 장비를 개발하였다. 하드웨어부분과 소프트웨어 부분으로 나누어 개발하였으며, 다양한 수준측량 장비를 이용하여 수준점 결과 값에 대한 검측을 실시해 보았다. 수준측량의 검측방법은 국가기준점(UO992)-A, 수준점(15-00-06-24)-B, 수준점(15-00-06-23)-C로 선정하여 왕복수준측량을 실시하였다. 그 결과 오토레벨과 디지털레벨의 경우 오차범위 내의 안정된 결과 값을 얻을 수 있었고, 스마트 레벨의 경우 A-B구간에서 약 24mm, B-C구간에서 약 26mm가 발생되었다. 이는 하드웨어의 완성도가 부족한 부분이 있었고, 상대적으로 많은 설치횟수 등에 따른 오차가 발생된 것으로 판단된다. 또한 거리구간별 스마트레벨 수준측량을 실시해 본 결과 평균 RMSE가 약 46mm정도 발생되었다. 이 역시 짧은 구간에서는 적은 오차가 발생되었지만 거리가 멀어짐에 따라 오차가 누적됨을 알 수 있었다. 향후, 정밀도의 향상부분에 대하여 보다 심도 있는 연구를 추진하여 실생활에 사용가능하도록 향상할 수 있다면 다양한 산업분야에서 응용할 수 있을 것으로 판단된다.

• 한국가시화정보학회지
• /
• 제10권2호
• /
• pp.25-31
• /
• 2012

High-performance smartphones, equipped with a digital camera and an application software, can render conventional bench-top laboratory instruments mobile at affordable costs. As the smartphone-based devices are portable and wireless, they have wide applications especially in providing point-of-care (POC) tests in resource-constrained areas. We developed a hand-held diagnostic system, Mobile SmartScope, which consists of a small optical unit integrated with a smartphone. The performance of the SmartScope was favorably compared with that of conventional light microscopy in detecting and quantifying red blood cells. We also evaluated the fluorescence detection limit of the SmartScope incorporated with a blue light-emitting diode and appropriate optical filters by using fluorescently labeled microbeads for intensity calibration.

• 드라이브 ㆍ 컨트롤
• /
• 제10권2호
• /
• pp.7-12
• /
• 2013

In this study, a wire/wireless communication system transmitting the operation data of engine from the ER (Engine Room) to the engine controller of ECR(Engine Control Room) has been developed through the communication of ISM(Industrial Science Medical) Band for the test operation environment improvement of medium speed engine. This wire/wireless communication system is composed of the RTU (Remote Terminal Unit) gathering and transmitting engine data as well as the MCU (Master Control Unit) receiving engine status information from the RTU to be sent to the engine controller (PLC). Through this study, a trial product of RTU and MCU has been manufactured. A test bench that has made temperature, pressure and pick-up sensor into a module for the local test of prototype was produced a test bench. In addition, at the same time save the data to a Web server and the smart phone real-time monitoring system has been developed using Wi-Fi communications. The ultimate objective of this study is to develop a wireless smart phone monitoring system of engine for the operator of engine to be able to monitor and control engine status even from the outside of engine room and control room based on this study.

• 한국산업융합학회 논문집
• /
• 제26권4_2호
• /
• pp.639-648
• /
• 2023

In modern society, UAM (Urban Air Mobility) transportation system is being developed as an alternative to urban traffic congestion and environmental problems, and electric vertical take-off and landing (eVTOL) is a combination of vertical take-off and landing function and electric power. It is attracting attention as an innovative next-generation transportation method as an eco-friendly alternative that reduces noise and air pollution by providing efficient mobility within the city. Since eVTOL development requires designing and implementing airframes suitable for various mission purposes, the power system needs to be developed as a platform concept before airframe development. In this study, we empirically proposed a test bench concept equipped with a stable power supply and an efficient control system, essential in developing a power platform with a combined function in the form of a fuselage and module type specialized for various mission purposes. The proposed drivetrain platform test bench consists of a system verifying the stable take-off and landing software and a power platform adjusting the motor's thrust. It will serve as a verification system that can be developed.

• 전기학회논문지
• /
• 제60권6호
• /
• pp.1255-1260
• /
• 2011

In this paper, we study on the reliability of Very High-rate Power Line Communication (VH-PLC) for Smart Grid, so that the resultant data rate is over 400Mbps at a physical layer. Firstly, reviewing the research trend of the PLC, we discuss the required techniques for supporting the Smart Grid. Considering a pre-specification with the value of several parameters, we investigate a multi-carrier modulation technique to overcome limitations of higher rate transmission under power line channel environments. Then, we propose a system specification of the VH-PLC in the sense of enhancing two features. One is resolving the problem of the co-existence of the deployed high-speed PLC according to the published standardization of KS X 4600-1 in Korea. The other is getting better performance on the grid adopting the diverse element techniques, such as multi-carrier modulation, a subcarrier utilization mode, a variable rate LDPC (Low Density Parity Check) code, and a time and frequency diversity technique. Further, a simulation tool, composed of an Event-Driven simulator and a Time-Driven simulator, is developed for the purpose of verifying the system performance and continuously cross-checking the test bench signal of the proposed VH-PLC system.

• 디지털콘텐츠학회 논문지
• /
• 제18권5호
• /
• pp.943-948
• /
• 2017

현재, 특정한 응용분야에 적합하도록 설계된 임베디드 시스템이 가전제품, 스마트폰, 자율주행 자동차, 로봇, 공장제어 등의 분야에 광범위하게 쓰이고 있다. 아울러, 임베디드 시스템을 구성하는 임베디드 프로세서의 성능에 지대한 영향을 미치는 DRAM의 중요성이 날로 증가되어, DRAM에 대한 연구가 산업계와 학계에서 활발하게 진행되고 있다. 모의실험을 통하여 임베디드 프로세서의 성능을 평가할 때 신뢰할만한 결과를 얻기 위하여, 보다 정확한 DRAM 모델을 갖추는 것이 중요하다. 본 논문에서는 이것을 위하여, DRAM 시뮬레이터와 연동할 수 있는 임베디드 프로세서 모의실험기를 개발하였다. 그리고, MiBench 임베디드 벤치마크를 입력으로, 싸이클 단위로 정확하게 동작하는 DRAM 모델이 임베디드 프로세서의 성능에 끼치는 영향을 분석하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 추계학술대회
• /
• pp.163-164
• /
• 2011

본 논문은 스마트그리드용 배터리 에너지 저장장치(Battery Energy Storage System, BESS)와 같은 대용량 전력변환장치의 개발 및 성능검증 시험에 사용된 대용량 시험설비에 대해 기술하였다. 대용량 시험설비는 모의 수 배전 계통 설비, DC Power Supply, 부하설비로 구성되어 있다. 모의 수 배전 설비는 개발 시험규격과 계통 상황을 모의하고, DC Power Supply는 연료전지나 배터리 등의 DC Source, 수동부하장치는 전력 변환 설비의 각종 부하들을 모의하기 위해 설계 제작하여 스마트그리드용 2MVA BESS의 성능검증 시험에 이용하고 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제26권4호
• /
• pp.425-431
• /
• 2002

In this study the characteristics of E-EGR valve developed by electrical method were analysed and the feasibility of application to vehicles was evaluated. The engine of smart car applied for diesel passenger car of small-displacement size developed by common vehicle was used for this experiment. It was installed a 3-cylinder, $0.8\ell$, turbo-charged light duty diesel engine with an electronic EGR valve. After the analysis and comparison of E-EGR valve performance by test bench, the estimation of vehicle application was executed through the EGR map and CVS-75 test result measured on the chassis dynamometer.