• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.2
• /
• pp.18-28
• /
• 2012

This study was to develop a novel automatic system for measuring St$\ddot{o}$ckigt sizing degree and contact angle at a time. The conventional methods to measure sizing degree had serious problems in obtaining significant differences according to different dosages of a sizing agent, and moreover they disclosed unique limitation due to liquid types used and tester's subjectivity. However, the newly developed system could get reproducible results through total automation of all procedures including liquid dropping, image acquisition and measurement of both St$\ddot{o}$ckigt sizing degree and contact angle. For the St$\ddot{o}$ckigt sizing test, the automatic system could measure sizing degree with more definite differences according to different dosage of AKD, compared to the conventional method. For the contact angle test, the automatic system showed a similar trend to the conventional method but had smaller contact angles due to distortion of an image focus by a sheet curl than the conventional testing machine. The problem from the image out of focus due to specimen curl will be overcome with adopting a new specimen holder for the future system.

• Journal of Technologic Dentistry
• /
• v.27 no.1
• /
• pp.27-39
• /
• 2005

This study is to show the qualitative analytic methods of facial asymmetry with three-dimensional morphometry and find out asymmetry change resulted from enlarging three local regions. Steel balls (1.2mm in diameter) were attached in twenty seven landmarks of a symmetrical artificial human skull. This artificial human skull was used as experimental materials. Twelve different asymmetrical artificial human skulls were formed by gradually enlarging the mandibular body length, gonial angle, and ramus height of the left hemiface. From the three-dimensional morphometry of each skull type, nine local area measurements and three total sum area measurements(representing the mandibular area, maxillary area, and lower facial area) were acquired and made into the surface area asymmetry degree. Menton deviation itself was used as the surface area asymmetry degree while right-left percentages were used in the other measurements. These surface area asymmetry degrees were compared with each other to find out asymmetry change according to the degree of actual facial asymmetry. Through the statistical analysis, following results were obtained. The results were as follows: 1. Left maxillary area of artificial human skull was 7.13$\pm$0.26% larger while mandibular area was 4.14$\pm$0.12% smaller than each those of right hemiface. After all, left lower facial area was 1.44$\pm$0.07% larger than those of right hemiface.(n=7). 2. Among the reduce rates of surface area asymmetry degree resulted from enlarging three local regions, ramus height was similar to mandibular body length while it was bigger than those of gonial angle. 3. Among the increase rates of menton deviation resulted from enlarging the local regions, ramus height was the biggest, mandibular body length was the second and gonial angle was the smallest. These results suggest that three-dimensional morphometry can be used to qualitatively analyse facial asymmetry and the asymmetry degree is more influenced by enlarging the ramus height, mandibular body length than those of gonial angle.

• Animal cells and systems
• /
• v.15 no.4
• /
• pp.325-336
• /
• 2011

Feeding ecology was compared among the three tonguefishes Cynoglossus abbreviatus, C. joyneri and C. robustus, collected from Seto Inland Sea, Japan, from June 2000 to May 2001. They are benthivores, consuming mainly gammarid amphipods, shrimps, crabs, gastropods, bivalves and ophiuroids. C. abbreviatus consumed greater proportions of ophiuroids whereas C. joyneri and C. robustus ate more amphipods and shrimps. While C. abbreviatus consumed mostly ophiuroids in all size classes, the diets of C. joyneri and C. robustus showed ontogenetic changes in feeding habits; smaller individuals of C. joyneri and C. robustus consumed gammarid amphipods, whereas larger C. joyneri ate shrimps and gastropods, and larger C. robustus fed mainly on gastropods, crabs, bivalves and polychaetes. Cluster analysis based on diet similarities emphasized that the three Cynoglossus species could be categorized on a size-related basis into three feeding groups: smaller C. joyneri and C. rubustus (<25 cm TL) could be classified as group A, and the larger of them (>25 cm TL) as group B, whereas C. abbreviatus was categorized as group C. This means that some degree of resource partitioning can occur among the three Cynoglossus species. The seasonal changes in the diets were also significant for the three Cynoglossus species.

• Journal of Energy Engineering
• /
• v.29 no.3
• /
• pp.25-33
• /
• 2020

In this study, flow and structural computational analysis were performed to investigate the structural safety of the lightweight butterfly valve disc designed by topology optimization. After flow analysis, as the opening angle increased, the flow coefficient increased non-linearly and showed a gentle slop. When the opening angle was 12 degree, the cavitation could be predicted. After FE analysis, all FE von-Misses stresses of the lightweight disc were smaller than the yield strength of the material, and all FE maximum deformations were also smaller than the conservative deformation of the previous study. Ultimately, it was confirmed that the structural safety of the lightweight valve disc based on computational analysis is effective.

• Laser Solutions
• /
• v.13 no.4
• /
• pp.1-6
• /
• 2010

Recently the use of ultra high strength steels (UHSS) in structural and safety component is rapidly increasing in the automotive industry. For example, 1.5GPa grade hot stamping with die-quenching of boron steel 22MnB5 could apply crash-resistant parts such as bumpers and pillars. The development of laser welding process of hot stamping steels, fundamental bead-on-plate welding and lap joint welding test were carried out using 3kW Nd:YAG laser. Local hardening & HAZ softening occurred in hot stamping steel as a result of metallurgical change caused by the welding heat input in the Nd:YAG laser welding process. The size of soft zones in the hot stamping steel was related to the welding heat input, being smaller at high speeds which generated a smaller heat input. Also in the case of lap joint design structure, same welded characteristics were shown. The HAZ softening degree was controlled to ensure the joint strength.

• Journal of Korean Physical Therapy Science
• /
• v.17 no.1_2
• /
• pp.33-39
• /
• 2010

Purpose: The purpose of this study was to analyze the effects of a balance training program using the TARGET Balance Trainer(TBT), which utilizes a visual target, on the balancing ability of normal, healthy individuals. Methods: Twelve healthy female students with an average of 20.7 years(SD=0.25), were participated in this study. They were randomly divided into two groups(6 subjects in each group); experimental group, control group. The experimental group underwent a 3-week training program using the TBT, while the control group trained using only a dynamic air cushion(DAC). Results: Compared to those who trained using only the DAC, participants who trained with the TBT had a smaller difference between the weights distributed(N) to their left and right foot while normal standing with their eyes open. The TBT group also showed a smaller discrepancy between the weights distributed(N) to their left and right sides while standing on one leg with their eyes open, and also with their eyes closed by eye band. Conclusions: TBT is effective to reduce the degree of weight shifting between left and right side in each group. This study is expected to provide a model for future clinical studies.

• Korean Journal of Occupational Health Nursing
• /
• v.12 no.2
• /
• pp.134-145
• /
• 2003

Purpose: The present study examines symptoms of VDT syndrome perceived by those nurses reviewing the application of health insurance at hospitals. This study also investigates those factor influencing on the experience of VDT syndrome among those nurses. Method: Data were collected through mail questionnaire survey in April, 2003. Of the 250 questionnaires disseminated, 214 questionnaires were finally analyzed using descriptive statistics and multiple regression analysis through SPSS/PC version 10.0. Result: Of the VDT syndrome, the musculoskeletal symptom score was highest, followed by ophthalmologic symptoms. The musculoskeletal symptoms were higher among younger nurses, having smaller space under the desk, and feeling uncomfortableness of the chair. The ophthalmologic symptoms were higher among those with a bachelor's degree, younger nurses, and those having a light reflection on the computer monitor, and those maintaining less than 40cm between eyes and the monitor. Higher dermatologic symptoms were observed among younger nurses and those using unclear monitor. The psychological symptoms were higher among younger nurses, those having a light reflection on the monitor, those unable to control the height of their chair, and those using uncomfortable chair. The overall symptoms were higher among younger nurses, those having a light reflection on the monitor, and those smaller space under the desk. Conclusion: Primary intervention should be given to those nurses with symptoms of VDT syndrome in order to regain health and prevent further aggravation of the symptoms. In particular, self-care behaviors of the nurses using VDT should be promoted with administrative support.

• The Journal of the Petrological Society of Korea
• /
• v.5 no.2
• /
• pp.161-167
• /
• 1996

The CSD (crystal size distribution) of diopside crystals in the calc-silicate hornfels of the Hwanggangni Formation intruded by the Cretaceous Daeyasan granite shows the patterns of continuous nucleation and growth. There is correlation between the distance from the intrusion contact and the slopes from the linear part of log(population density) vs. size diagrams. In the log(population density) vs. size diagrams of the samples systematically collected from the intrusion contact, two different groups are recognized; the slopes for the samples near the intrusion contact (horizontal distance from the contact less than 50m) are gentler (1500$cm^{-1}$) than those for the samples away from the intrusion contact (2500$cm^{-1}$, distance from the contact greater than 100 m). These differences may reflect the differences in growth rates and crystallization time, or the differences in diopside-forming reactions. All of the log(population density) vs. size diagrams show depletion of smaller crystals. The observed depletion may be due to Ostwald ripening or the changes in nucleation rates as the reactant phases diminishes. Similar grouping is also possible for the observed degree of depletion of smaller crystals; the depletion decreases with increasing distance from the intrusion contact, suggesting temperature-dependent rates of Ostwald ripening.

• Solar Energy
• /
• v.19 no.4
• /
• pp.33-43
• /
• 1999

The study on ice thermal storage system is to improve total system performance and increase the economical efficiency in actual all-conditioning facilities. To obtain the high charging and discharging efficiencies in ice thermal storage system, the improvement of thermal stratification is essential, therefore the process flow must be piston flow in the cylindrical type. With the relation of the aspect ratio(H/D) in the storage tank, the stratification is formed better as inlet flow rate is smaller. If the inlet and the outlet port are settled at the upside and downside of the storage tank, higher storage rate could be obtainable. In case that the flow directions inside the thermal storage tank are the upward flow in charging and the downward in discharging, thermal stratification is improved because the thermocline thickness is maitained thin and the degree of stratification increases respectively. In the charging process, in case of inlet flow rate the thermal stratification has a tendency to be improved with the lower flow rate and smaller temperature gradient in case of inlet temperature, the large temperature difference between inflowing water and storage water are influenced from the thermal conduction. The effect of the reference temperature difference is seen differently in comparison with the former study for chilled and hot water. In the discharging process, the thermal stratification is improved by the effect of the thermal stratification of the charging process.

• Journal of International Academy of Physical Therapy Research
• /
• v.9 no.4
• /
• pp.1571-1575
• /
• 2018

The purpose of this study was to investigate the effect of somatotype on the $VO_2max$ and hormone (adrenaline and noradrenaline) during treadmill walking. Forty healthy men participated and were randomized to four groups: Male 1 (M1) group, Male 2 (M2) group, Male 3 (M3) group, and Male 4 (M4) group. M4 group is the largest body type, and M1 group is the smaller the body type. Participants walked at a speed of 3.5 km/h for five minutes at an incline angle of $0^{\circ}$, $5^{\circ}$, and $10^{\circ}$ in the treadmill. Maximum oxygen consumption and hormone (adrenaline and noradrenaline) were measured. In the results, $VO_2max$ has significantly increased according to the degree of the treadmill inclination, and M4 group (larger body type) consumed more oxygen than the M1 group (smaller body type). In the hormone, there was a significant increase in adrenaline concentration after walking in all groups, and there was a significant difference in M1-M4, M2-M4 and M3-M4. The noradrenaline concentration significantly increased after treadmill gait in all groups, and there was no significant difference in noradrenaline between groups. This study suggests that the larger body type consumes more oxygen during walking, and treadmill walking contributes to an increase in the concentration of adrenaline and noradrenaline.