• The Journal of Korean Society for Radiation Therapy
• /
• v.32
• /
• pp.53-59
• /
• 2020

Purpose: The purpose of this study is to compare and analyze the difference between the MLC log file-based software (Mobius) and the conventional phantom-ionization chamber (ArcCheck) dose verification method according to the change of target volume. Material and method: Radius 0.25cm, 0.5cm, 1cm, 2cm, 3cm, 4cm, 5cm, 6cm, 7cm, 8cm, 9cm, 10cm with a Sphere-shaped target Twelve plans were created and dose verification using Mobius and ArcCheck was conducted three times each. The irradiated data were compared and analyzed using the point dose error value and the gamma passing rate (3%/3mm) as evaluation indicators. Result: Mobius point dose error values were -9.87% at a radius of 0.25cm and -4.39% at 0.5cm, and the error value was within 3% at the remaining target volume. The gamma passing rate was 95% at a radius of 9cm and 93.9% at 10cm, and a passing rate of more than 95% was shown in the remaining target volume. In ArcCheck, the average error value of the point dose was about 2% in all target volumes. The gamma passing rate also showed a pass rate of 98% or more in all target volumes. Conclusion: For small targets with a radius of 0.5cm or less or a large target with a radius of 9cm or more, considering the uncertainty of DQA based on MLC log files, phantom-ionized DQA is used in complementary ways to include point dose, gamma index, DVH, and target coverage. It is believed that it is desirable to verify the dose delivery through a comprehensive analysis.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.3
• /
• pp.98-109
• /
• 2002

Bluetooth technology is a publicly available specification proposed for Radio Frequency (RF) communication for short-range :1nd point-to-multipoint voice and data transfer. It operates in the 2.4㎓ ISM(Industrial, Scientific and Medical) band and offers the potential for low-cost, broadband wireless access for various mobile and portable devices at range of about 10 meters. In this paper, we describe the structure and the test results of the bluetooth baseband module with direct memory access method we have developed. This module consists of three blocks; link controller, UART interface, and audio CODEC. This module has a bus interface for data communication between this module and main processor and a RF interface for the transmission of bit-stream between this module and RF module. The bus interface includes DMA interface. Compared with the link controller with FIFOs, The module with DMA has a wide difference in size of module and speed of data processing. The small size module supplies lorr cost and various applications. In addition, this supports a firmware upgrade capability through UART. An FPGA and an ASIC implementation of this module, designed as soft If, are tested for file and bit-stream transfers between PCs.

• Explosives and Blasting
• /
• v.35 no.1
• /
• pp.43-52
• /
• 2017

Mountain and hill areas occupy by more than 70% in South Korea and Rock drilling should be applied in order to reduce noisy & vibration from massive civil engineering business such as road expansion, high-way construction, subway construction and construction of site renovation such as a newly-built & re-development of apartment, newly-built of high-rising building in downtown area. As Blasting noise & vibration such as vibration, noise, fly rock etc caused by blasting operation from large small scale construction occurs, neighboring residents who demand the compensation file a civil complaint so that the business reach a deadlock. As the excavation method for these areas, There are blasting of micro-vibration, mechanical excavation method(Rock splitter, Breaker etc), similar blasting method(plasma, gel fragmentation etc) to date. In this study, we are trying to find the feature & performance which get improved economic feasibility & construct ability through improving sympathetic detonation of New KINECKER-I used in blasting of micro-vibration & formulation and would provide convenience for use by introducing standard blasting pattern & construction method. Also, checked and confirmed all the blasting with connecting cap has been cleary detonated.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.1
• /
• pp.40-50
• /
• 2016

A BIM, which is being applied actively to the construction and civil construction industries, is a technology that can maximize efficiency of various sectors from initial planning and design, construction, and maintenance, to demolition; however, it is in the introductory phase in the field of domestic landscaping. In order to introduce and promote BIM in the field of landscape design, this study developed a prototype of a library and template and analyzed the performance of trial application. For the development of a prototype, annotations and types were analyzed from floor plans of existing small parks, and components of landscape template were deduced. Based on this, play facilities, pergola, and benches were madeintofamily and templates, making automatic design possible. In addition, annotations and tags that are often used in landscape design were made, and a 3D view was materialized through visibility/graphic reassignment. As for tables and quantities, boundary stone table, mounding table, summary sheet of quantities, table of contents, and summary sheet of packaging quantities were grouped and connected with floor plans; regarding landscaping trees, classification criteria and name of trees that are suitable for domestic situations were applied. A landscape template was created to enable the library file format(rfa) that can be mounted on a building with BIM programs. As for problems that arose after the trial application of the prepared template, some CAD files could not be imported; also, while writing tables, the basis of calculation could not be made automatically. Regarding this, it is thought that functions of a BIM program and template need improvement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.669-678
• /
• 2018

This study developed information technology infrastructures for building a driving environment analysis platform using various big data, such as vehicle sensing data, public data, etc. First, a small platform server with a parallel structure for big data distribution processing was developed with H/W technology. Next, programs for big data collection/storage, processing/analysis, and information visualization were developed with S/W technology. The collection S/W was developed as a collection interface using Kafka, Flume, and Sqoop. The storage S/W was developed to be divided into a Hadoop distributed file system and Cassandra DB according to the utilization of data. Processing S/W was developed for spatial unit matching and time interval interpolation/aggregation of the collected data by applying the grid index method. An analysis S/W was developed as an analytical tool based on the Zeppelin notebook for the application and evaluation of a development algorithm. Finally, Information Visualization S/W was developed as a Web GIS engine program for providing various driving environment information and visualization. As a result of the performance evaluation, the number of executors, the optimal memory capacity, and number of cores for the development server were derived, and the computation performance was superior to that of the other cloud computing.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.4
• /
• pp.553-558
• /
• 2002

To utilize the small redlip croaker, four kinds of seasoned fillet were produced. The nutrient composition, peroxide value and coliforms count of the products were determined, and sensory characteristics were evaluated. The seasonings consisted of the formula for commercial dried file fish added with water (A, control), green tea extract (B), rosemary extract (C) and soypaste with red pepper (D). The crude protein and carbohydrate contents of the products were in the range of 39~45% and 23~3l%, respectively. The lipid content of product B was the lowest, while that of product D was the highest among the tested products. All products showed similar amino acid profiles with a high content of glutamic acid, aspartic acid, glycine and lysine. The saturates in fatty acid composition were similar (50~51%) among the products. However, the polyenes were higher (17%) in product C than products A, B and D (13%). The peroxide value of product C was the lowest among the products. There were not significant differences in taste and color among the products.

• Journal of Korea Multimedia Society
• /
• v.12 no.3
• /
• pp.335-344
• /
• 2009

Embedded systems and web browsers have started to provide two-dimensional vector graphics features, to finally support scalability of graphics outputs, while traditional graphics systems have focused on the raster and bitmap operations. Nowadays, SVG and Flash are actively used while OpenVG from Khronos group plays the role of a de facto low-level API standard to support them. In this paper, we represent the design and implementation process and the final results of an OpenVG implementation, AlexVG. From its design stage, our implementation aims at the cooperation with SVG-Tiny, another de facto standard for embedded systems. Currently, our overall system provides not only the OpenVG core features but also variety of OpenVG application programs and SVG-Tiny media file playing capabilities. For the conformance with the standard specifications, our system completely passed the whole OpenVG conformance test suites and the graphics output portions of the SVG-Tiny conformance test suites. From the performance point of view, we focused on the efficiency and effectiveness especially on the mobile phones and embedded devices with limited resources. As the result, it showed impressive benchmarks on the small-scale CPU's such as ARM's, even without neither any other libraries nor acceleration hardware.

• The KIPS Transactions:PartC
• /
• v.17C no.1
• /
• pp.27-36
• /
• 2010

In Web registration pages and online polling applications, CAPTCHA(Completely Automated Public Turing Test To Tell Computers and Human Apart) is used for distinguishing human users from automated programs. Text-based CAPTCHAs have been widely used in many popular Web sites in which distorted text is used. However, because the advanced optical character recognition techniques can recognize the distorted texts, the reliability becomes low. Image-based CAPTCHAs have been proposed to improve the reliability of the text-based CAPTCHAs. However, these systems also are known as having some drawbacks. First, some image-based CAPTCHA systems with small number of image files in their image dictionary is not so reliable since attacker can recognize images by repeated executions of machine learning programs. Second, users may feel uncomfortable since they have to try CAPTCHA tests repeatedly when they fail to input a correct keyword. Third, some image-base CAPTCHAs require high communication cost since they should send several image files for one CAPTCHA. To solve these problems of image-based CAPTCHA, this paper proposes a new CAPTCHA based on both image and text. In this system, an image and keywords are integrated into one CAPTCHA image to give user a hint for the answer keyword. The proposed CAPTCHA can help users to input easily the answer keyword with the hint in the fused image. Also, the proposed system can reduce the communication costs since it uses only a fused image file for one CAPTCHA. To improve the reliability of the image-text fusion CAPTCHA, we also propose a dynamic building method of large image dictionary from gathering huge amount of images from theinternet with filtering phase for preserving the correctness of CAPTCHA images. In this paper, we proved that the proposed image-text fusion CAPTCHA provides users more convenience and high reliability than the image-based CAPTCHA through experiments.

• Journal of the Korean Society for Library and Information Science
• /
• v.6
• /
• pp.137-163
• /
• 1979

The Purpose of this study is analyzed that (l) How the public Libraries under the Japanese Rule since the end of the Yi-Dynasty were recepted and generated by the people and (2) How they were organiged and managed. (3) Also it examined that how they affected the development of the libraries of today. 1. The following are the analyzed results: Three types of the public Libraries under the Japanese Rule for a period of 36 years engaged busily in colonization were Private's Public Libraries, Local Self-Government's Libraries and the Central Governmental Libraries, and were in order established. 2. They were eatablished by individuals, Confucian School Foundation, Young Men's Clubs, School Associations, Korean brethren residing abroad, or The Press Centering around the Local Self-Governments and the Japanese Government-General. 3. In 1932 of the period of the Japanese Rule, the number of Libraies gained the summit and reached 80 Libraries. The Public Libraries including the Central Governmental Libraries remained in existence until the end of the War had been kept up the functions of the Libraries, but the Private Libraries operated by the Koreans were very small and poor. As a result, most of them were closed up and some Libraries transferred their controls to the public. Until the end of the war, only a little over 10 Private Libraries were Kept up. From the aspects of it's organization system, the most of their libraries replaced their chief librarians with non-professional county-headmen or Local supporters. From the aspect of collections, they wate mainly consists of Japanese books for the proper quidance of the public thought based on the ideology of Japanese Rule to Korea and on the industrial promotion rather than books about Koreanology or Western books. At that time, the Library users were with the jobless men and students as the central figures. And the next ranking by the social position of readers was children, farmers, merchants, industrialists, public servants, miscellaneous and educators. Their reading tendencies laid stress on linguistics and literature, physical sciences and medicine, While the reading trend of military sciences and medicine, while the reading trend of military sciences and engineering were very inactive. This was because the Japanese Government-General had not kept the military collections on file. Besides, they were reluctant to make Korean's learn the professional knowledge and so the main reference materials of technology not provited. Most of the Libraries put practiced in circulation services were very important circulation in withinder of the reading room rather than in outside of the Library building. On the other hand, their circulation services has above came with many limitations. As stated above, the public Libraries' managements and activitives under the period of Japanese Rule were the way and means to achive the colonial and imperialistic purpose of the Japanese Empire.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.27 no.2
• /
• pp.82-96
• /
• 2018

3D printing is a process of producing 3d object from a digital file in STL format by joining, bonding, sintering or polymerizing small volume elements by layer. The various type of 3d printing is classified according to the additive manufacturing strategies. Among the types of 3D printer, SLA(StereoLithography Apparatus) and DLP(Digital Light Processing) 3D printer which use polymerization by light source are widely used in dental office. In the previous study, a full-arch scale 3d printed model is less precise than a conventional stone model. However, in scale of quadrant arch, a 3d printed model is significantly precise than a five-axis milled model. Using $3^{rd}$ Party dental CAD program, full denture, provisional crowns and diagnostic wax-up model are fabricated by 3d printer in dental office. In Orthodontics, based on virtual setup model, indirect bracket bonding tray can be generated by 3d printer. And thermoforming clear aligner can be fabricated on the 3d printed model. 3D printed individual drilling guide enable the clinician to place the dental implant on the proper position. The development of layer additive technology enhance the quality of 3d printing object and shorten the operating time of 3D printing. In the near future, traditional dental laboratory process such as casting, denture curing will be replaced by digital 3D printing.