• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.3148-3165
• /
• 1993

A cascade wind tunnel test for a turbine nozzle, which was designed for a small turbo jet engine in a previous study, has been conducted to evaluate its aerodynamic performance and losses. The large-scale blades were based on the mid-span profile of the nozzle. Oil film flow structure, and then 3-dimensional velocity components were measured in the flow passage with a 5-hold pressure probe, in addition to turbulent intensities at mid-span of cascade exit using a hot-wire anemometer. From this study, 3-dimensional growth of horseshoe and passage vortices in the downstream direction was clearly understood with near-wall flow phenomena. In addition, secondary flow and losses associated with the blade configuration were obtained in detail.

• 한국항공우주학회지
• /
• 제33권2호
• /
• pp.98-105
• /
• 2005

본 논문은 복합재 패들형 블레이드를 장착한 무힌지 허브 시스템의 정지 및 전진 비행시 공력탄성학적 안정성 시험에 대한 것이다. 블레이드와 허브 flexure의 리드래그 감쇠비를 측정하기 위해 무힌지 허브시스템을 한국항공우주연구원의 GSRTS(General Small-scaled Rotor Test System)에 장착하여 가진 시험을 실시하였다. 리드래그 모드의 감쇠비를 산출하기 위해 MBA(Moving Block Analysis)기법을 사용하였다. 먼저 금속재 flexrue를 장착하여 시험을 수행한 후, 로터시스템의 동력학적 특성이 같도록 설계된 복합재 flexure를 장착하여 시험하였다. 시험은 정지 및 전진비행 조건에 따라 지상 및 풍동에서 수행하였다. 비회전 시험을 통해 복합재 flexure의 감쇠특성이 금속재보다 향상됨을 확인하였으며, 모든 시험 조건에 대해 복합재 flexure가 금속재보다 무힌지 허브시스템에 대한 공력탄성학적 안정성이 향상됨을 확인하였다.

• 항공우주기술
• /
• 제3권2호
• /
• pp.217-228
• /
• 2004

본 논문은 복합재 패들형 블레이드를 장착한 축소 힌지없는 로터 시스템의 정지 및 전진 비행조건에 대한 회전시험 기술과 결과에 대한 것이다. 축소 로터 시스템은 실물크기 로터 시스템의 구조 자료를 이용하여 프루드 축소화하였고, 허브 flexure는 동일한 로터의 동력학적 특성을 기준으로 금속재와 복합재 2가지를 제작하였다. 2종류의 힌지없는 허브시스템을 KARI의 GSRTS에 장착후 회전 시험을 실시하여 로터 시스템의 리드래그 감쇠비와 공력 하중을 측정하였다. 리드래그 모드의 감쇠비를 산출하기 위해 MBA(Moving Block Analysis)기법을 사용하였고, 허브와 주축 사이에 6분력 발란스를 장착하고, 블레이드에 스트레인게이지를 부착하여 공력하중을 측정하였다. 시험은 제자리 및 전진비행 조건에 따라 지상 및 풍동에서 각각 수행하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.680-685
• /
• 2006

This paper describes the aeroelastic stability test of the small-scaled 'Next-Generation Blade(NRSB)' with NRSH (Next-Generation Hub System) and HCTH hingeless hub system in hover and forward flight conditions. Excitation tests of rotor system installed in GSRTS(General Small-scale Rotor Test System) at KARI(Korea Aerospace Research Institute) were tarried out to get lead-lag damping ratio of blades with flexures as hub flexure. MBA(Moving Block Analysis) technique was used for the estimation of lead-lag damping ratio. First, NRSB-1F blades with HCTH hub system, Then NRSB-1F with NRSH hub system were tested. Second, NRSB-2F blades with NRSH hub system were tested. Tests were done on the ground and in the wind tunnel according to the test conditions of hover and forward flight, respectively. Non-rotating natural frequencies, non-rotating damping ratios and rotating natural frequencies were showed similar level fir each cases. Estimated damping ratios of NRSB-1F, NRSB-2F with HCTH and NRSH were above 0.5%, and damping ratio increased by collective pitch angle increasement. Furthermore damping ratios of NRSB-2F were higher than damping ratios of NRSB-1F in high pitch angle. It was confirmed that the blade design for noise reduction would give observable improvement in aeroelastic stability compared to paddle blade and NRSB-1F design.

• 한국소음진동공학회논문집
• /
• 제16권8호
• /
• pp.848-856
• /
• 2006

This paper describes the aeroelastic stability test of the small-scaled 'Next-generation Blade(NRSB)' with NRSH (next-generation hub system) and HCTH hingeless hub system in hover and forward flight conditions. Excitation tests of rotor system installed in GSRTS (general small-scale rotor test system) at KARI (Korea Aerospace Research Institute) were carried out to get lead-lag damping ratio of blades with flexures as hub flexure. MBA(moving block analysis) technique was used for the estimation of lead-lag damping ratio. First, NRSB-1F blades with HCTH hub system, then NRSB- 1F with NRSH hub system were tested. Second, NRSB-2F blades with NRSH hub system were tested. Tests were done on the ground and in the wind tunnel according to the test conditions of hover and forward flight, respectively. Non-rotating natural frequencies, non-rotating damping ratios and rotating natural frequencies were showed similar level for each cases. Estimated damping ratios of NRSB-1F, NRSB-2F with HCTH and NRSH were above 0.5%, and damping ratio increased by collective pitch angle increasement. Furthermore damping ratios of NRSB-2F were higher than damping ratios of NRSB-1F in high Pitch angle. It was confirmed that the blade design for noise reduction would give observable improvement in aeroelastic stability compared to paddle blade and NRSB-1F design.