• Magazine of the Korean Society of Agricultural Engineers
• /
• v.33 no.4
• /
• pp.52-60
• /
• 1991

This study was conducted to investigate the appropriate operation method minimizing the deviation between irrigation water demand and release from the reservoirs, and the simulation technique was used in the operation model. This model was applied to the grouped reservoirs system consisted of Dongsang, Daia and Keungchun reservoirs and Eowoo-weir in Chonbuk FLIA district. The results obtained in this study are summarized as follows; 1.The area above the Eowoo weir point was divided into 6 small watersheds, and daily inflows from each watershed were calculated by Tank model. It showed that the average annual runoff ratio was 40-60% respectively. 2.Based on the Blaney-Criddle formula daily water requirement of Chonbuk FLIA irrigation area was estimated, mean water requirement for paddy field during the irrigation period was 818.lmm. 3.Using the basic data such as inflow and water demand, four different release types were selected. Through the simulated operation the difference between intake water required at Eowoo-weir point and release from the 3 reservoirs was estimated. The best result was obtained when Daia and Keungchun reservoirs are operated parallelly at fixed release ratio and the release of Dongsang reservoir was determined according to the storage of Daia reservoir.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.143-150
• /
• 2007

Ring and cylinder bore wear may not be a problem in most current automotive engines. However, a small change in ring face and cylinder bore diameter can significantly affect the lubrication characteristics and ring axial motion. This in turn can cause to change inter-ring pressure, blow-by and oil consumption in an engine. Therefore, by predicting the wear of piston ring face and cylinder bore altogether, the changed ring end gap and the changed volume of gas reservoir can be calculated. Then the excessive oil consumption can be predicted. Here, the oil amount through top ring gap into combustion chamber is estimated as engine oil consumption. Furthermore, the wear theories of ring and cylinder bore are included. The changed oil consumption caused by the new end gap and the new volume of oil reservoir around second land, can be calculated at some engine running interval. Meanwhile, the wear amount and oil consumption occurred during engine durability cycle are compared with the calculated values. The wear data of rings and cylinder bore are obtained from three engines after engine durability test. The calculated wear data of each part are turn out to be around the band of averaged test values or a little below. It is shown that the important factor regarding oil consumption increasement is the wear of ring face.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.35 no.3
• /
• pp.23-35
• /
• 1993

The objectives of this paper were to validate the proposed network flow model using field data and to demonstrate the model applicability for various purposes. The model was tested with data from the Banweol watershed, where an intentive streamflow gauging system has been established. Model parameters were not calibrated with field data so that it can be validated as ungaged conditions. Three different schemes were employed to represent the drainage system of the tested watershed : a single, complex, and detailed network. The single network assumed the watershed as a cell, while complex and detailed networks considered several cells. The results from different schemes were individually compared satisfactorily to the observed daily stages at the Banweol reservoir located at the outlet of the watershed. The results from three schemes were in close agreement with each other, Justifying that the model performs very well for different network schemes being used. Daily streamflow from three network schemes was compared for a selected reach within the watershed. The results were very close to each other regardless of network formulation. And the model was applied to simulate daily streamflow before and after the construction of a reservoir at a reach. The differences were discussed, which reflected the influences of the dam construction upon the downstream hydrology. Similar appliocations may be possible to identify the effects of hydraulic structures on streamflow.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.6
• /
• pp.39-50
• /
• 2014

This study was conducted to establish inventory and propose conservation strategy of 'village wetlands' in Cheonan. As results, the village wetlands are defined as such places as palustrine wetland, village embankment, agricultural reservoir or small reservoirs located in or near the village and related to everyday life or farming. Firstly 791 provisional village wetlands were identified in Cheonan by using Arc-GIS 10.1, then 104 wetlands were defined as village wetlands and listed the inventory of Cheonan Village Wetlands after being validated through their area (greater than $1,000m^2$), satellite images, Korea Land Information System, land use map, land coverage map and field survey. Finally the 49 wetlands were selected for detailed surveying, and function assessment. As the result of the wetland function assessments, 11 wetlands were found to have 'high' wetland function (conservation) 30 wetlands were 'average' (enhancement) and 8 wetlands were 'low' (restoration or enhancement). Enhancing biodiversity and ecosystem services through ecological management of wetlands in Cheonan and connecting with an ecological network were proposed.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.3
• /
• pp.293-305
• /
• 2011

A special concern is paid to the risks with which small-sized water resources systems are confronted in supplying water in the far future. Taking the Gwangdong dam reservoir as a case study, the authors seek to understand demand-side and supply-side disturbances of a reservoir, which, respectively, corresponds to effects of water demand changes on the intake amount and those of climate changes on the inflow amount. In result, it is demonstrated that both disturbances in the next 50 years are almost unpredictable. Yet the projection ranges, thought of as relatively reliable information that models offer, reveal that severity and period of water shortage is very likely to change. It is therefore concluded that water resources management requires more rigorous approaches to overcoming high uncertainties. The methods and models for projecting those disturbances are selected, based on practicality and applicability. Nevertheless, they show a large usefulness, especially in dealing with data shortage and reducing the needs for expensive modeling resources.

• Geomechanics and Engineering
• /
• v.19 no.6
• /
• pp.523-532
• /
• 2019

Based on the formation characteristics, wellbore parameters and insulated tubing (IT) parameters of the Shengli oilfield, Shandong, China, a geomechanical model is built to predict the temperature distributions of the wellbore and formation. The effects of the IT heat conductivity coefficient (HCC), well depth and IT joint on the temperature distribution of the IT, completion casing, cement sheath, and formation are investigated. Results show the temperature of the formation around the wellbore has an exponentially decreasing relation with the distance to the wellbore. The temperature of the formation around the wellbore has an inverse relation with the IT HCC when the temperatures of the steam and the formation are given. The temperature of the casing outer wall is mainly determined by the steam temperature and IT HCC rather than by the initial formation temperature. The temperature of the casing at the IT joint is much larger than that of the other location. Due to the IT joint having a small size, the effects of the IT joint on the casing temperature distribution are limited to a small area only.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.2
• /
• pp.59-64
• /
• 2014

In this study, the large scale test was performed to investigate the behavior of failure for the embankment and spillway transitional zone by overtopping. The pore water pressure, earth pressure, settlement and failure pattern of covering embankment with geotextile were compared and analyzed. The pore water pressure showed a small change in the spillway transition zone and core, indicating that the geotextile efficiently reinforced the embankment. The earth pressure decreased the infiltration of the pore water only in inclined cores type to secure local stability. The behavior of failure started from the bottom and gradually progressed upwards. After the intermediate overtopping period (100 min), width and depth of the seepage erosion were very small due to the effect of geotextile which delayed failure. Therefore, the reinforced method by geotxtile was a very effective method to respond to the emergency due to overtopping.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.52 no.6
• /
• pp.75-83
• /
• 2010

The objective of this paper is to study the discharge characteristics of pollutant loads in small watershed according to probability rainfall using the Hydrologic Simulation Program-Fortran (WinHSPF). The subwatershed of Gosam reservoir watershed in Gyeonggido province was simulated and the probability rainfall of study area was estimated by recurrence interval and duration. The probability rainfalls are 156.5, 205.9 and 277.4 mm for 6 hrs, 12 hrs and 24 hrs in 10 year frequency, and each probability rainfalls is distributed by Huff's 4th quantiles method and applied to HSPF. The pollutant loads were high for initial rainfall. The concentrations of TN, TP and BOD were high as rainfall duration is shorter and rainfall intensity is higher.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.495-498
• /
• 2006

The Kaplan turbine model has been tested and analyzed. The blade angle and the guide vane opening of the turbine model were designed to be varied according to the best combination of guide vane and runner blade opening. When the changes in head and output were comparatively large, the efficiency drop were small, so the efficiency characteristics and stability of the entire operating condition were maintained in good condition. These results showed that the developed model in this study will be suitable for small hydropower stations with large changes In head and load such as agricultural reservoir.

• Geophysics and Geophysical Exploration
• /
• v.11 no.3
• /
• pp.242-249
• /
• 2008

Recently, AVO analysis has been widely used in oil exploration with seismic subsurface section as a direct indicator of the existence of the gas. In the case of the deep reservoirs like the gas reservoirs in the East-sea, it is often difficult to observe AVO responses in CMP gathers even though the bright spots are shown in the stacked section. Because the reservoir becomes more consolidated as its depth deepens, P-wave velocity does not decrease significantly when the pore fluid is replaced by the gas. Thus the difference in Poisson's ratio, which is a key factor for AVO response, between the reservoir and the layer above it does not increase significantly. In this study, we analyzed the effects of Poisson's ratio difference on AVO response with a variety of Poisson's ratios for the upper and lower layers. The results show that, as the difference in Poisson's ratio between the upper and lower layers decreases, the change in the reflection amplitude with incidence angle decreases and AVO responses become insignificant. To consider the limitation of AVO responses shown in the gas reservoir in East-sea, the velocity model was made by simulation Gorae V structure with seismic data and well logs. The results of comparing AVO responses observed from the synthetic data with theoretical AVO responses calculated by using material properties show that the amount of the change in reflection amplitude with increasing incident angle is very small when the difference in Poisson's ratio between the upper and lower layers is small. In addition, the characteristics of AVO responses were concealed by noise or amplitude distortion arisen during preprocessing. To overcome such limitations of AVO analysis of the data from deep reservoirs, we need to acquire precisely reflection amplltudes In data acquisition stage and use processing tools which preserve reflection amplitude in data processing stage.