• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.474-478
• /
• 2006

It is becoming more significant to develop a rotary voice coil motor(VCM) type's actuator for small form factor (SFF) optical disk drive(ODD), as portables are getting more and more popularized nowadays. The actuator which is applicable to small-sized ODD with a compact flash(CF) II card size was developed and fabricated. The experimental results showed that the finite element(FE) model is different from the fabricated model. And so flexible mode frequencies did not satisfy specifications of small-sized ODD, and tuning. Tuning procedures were required to improve dynamic characteristics of the fabricated actuator through finite difference method(FDM). At first, design variables were extracted through parameter study and the tuned FE model was improved by design of experiment(DOE). Consequently, It was confirmed that the improved model was applicable to SFF ODD.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.5
• /
• pp.380-385
• /
• 2020

Over the past decade, small robots have been of particular interest in the engineering field. Among the various types of small robots, biomimetic robots, which mimic animals and insects, have been developed for special activities in areas where humans cannot physically access. The optimal motion of a walking robot can be determined by the characteristics of the traversed surface (e.g., roughness, curvature, slope, materials, etc.). This study proposes three types of piezoelectric structures using different driving mechanisms, depending on the application range of the small walking robots. Dynamic modeling using computer-aided engineering optimized the shape of the robot to maximize its moving characteristics, and the results were also verified through its fabrication and experimentation. Three types of robots, named by their actuator shapes as I, π, & T-shape, were proposed regarding application for small scale ambulatory robots to different terrain conditions. Among these, the T-shaped robots were shown to have a wide range of speeds (from 2 mm/s up to 255 mm/s) and good carrying capacity (up to 10 g at 50 mm/s) through driving experiments. Based on this study, we proposed possible application areas for the three types of walking robot actuators.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.10 s.181
• /
• pp.2597-2602
• /
• 2000

The most effective means of evaluating remaining life is through the creep testing of samples removed from the component. But sampling of large specimen from in-service component is actually impossible. So, sampling device and small-specimen creep tester have been applied. Sampling device has been devised to extract mechanically small samples by hemispherical, diamond -coated cutter from the surface of turbine rotor bores and thick-walled pipes without subsequent weld repairs requiring post weld heat treatment. A method of manufacturing small creep specimen, 2min gage diameter and 10min gage length, using electron beam welding to attach grip section, has been proven. Small-specimen creep tester has been designed to control atmosphere to prevent stress increment by oxidation during experiment. To determine whether the small specimens successfully reproduce the behavior of large specimens, creep rupture tests for small and large specimens have been performed at identical conditions. Creep rupture times based on small specimens have closely agreed within 5% error compared with that of large specimen. The errors in rupture time have decreased at longer test period. This comparison validates the procedure for fabricating and testing on small specimen. This technique offers potential as an efficient method for remaining life assessment by direct sampling from in -service high temperature components.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.182-182
• /
• 2017

Many small island nations rely on groundwater as their only other source of freshwater in addition to rainwater harvesting. The volume of groundwater resource of small island nations are further limited by their smaller surface area and specific hydrogeology. The rapid growth of population and tourism has led to increasing water demands and pollution of available groundwater resources. The predicted climate change effects pose significant threats to the already vulnerable freshwater lens of small islands in the form of rise in sea level, coastal inundation, saltwater intrusion, varied pattern of precipitation leading to droughts and storm surges. The effects of climate change are further aggravated by manmade stresses like increased pumping. Thus small island water resources are highly threatened under the effects of climate change. But due to the limited technical and financial capacity most of the small island developing states were unable to conduct detailed technical investigations on the effects of climate change on their water resources. In this study, we investigate how well small island countries are preparing for climate change. The current state of freshwater resources, impacts of predicted climate change along with adaptation and management strategies planned and implemented by small island countries are reviewed. Proper assessment and management practices can aid in sustaining the groundwater resources of small islands under climate change.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.660-663
• /
• 2009

Currently in Korea, the lack of facilities and technical criteria for the performance test of small hydropower degrades the efficiency of the domestic small hydropower turbine, and makes it difficult to objectively evaluate the performance of hydro turbine. Therefore Korean institute of water and environment in K-water planned making a basis of performance test of small hydropower by using our flowmeter calibration system the largest one in Korea. We planned the maximum measurable power of hydro turbine will be 200 kW in our system. Improving the efficiency of small hydropower system can achieve the additional development benefit about 1.5 billion won per year.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.3
• /
• pp.139-144
• /
• 2005

[ $SF_6$ ] gas circuit breakers are widely used short circuit current interruption in EHV or UHV power system. For a $SF_6$ gas circuit breaker development, the $SF_6$ gas velocity measurement is necessary during $SF_6$ circuit breaker's trip operation. Small-gap flashover characteristics are used for this measurement. So, small-gap measuring system which will be used to develope GCB should be developed. This study shows the characteristic analysis and experimental results of small-gap measuring system.

• Journal of Distribution Science
• /
• v.10 no.11
• /
• pp.55-60
• /
• 2012

Purpose - This study aims to suggest policy directions for small retail markets in Korea by statistical analysis, which would help small retailers who are facing various difficulties. Research design, data, methodology - This study diagnoses the problems faced by small retail industries in Korea based on government statistics. In addition, this study identifies three areas for successful collaboration between the SSMs and traditional markets-information distribution, products, and fair trade. Results - This study makes three recommendations-information distribution, products, and fair trade. This includes activation of the existing mutual collaboration efforts, channels, CSR report writing and publicity, ethical management cooperation seminars, contract systems of no return, establishment of staff outsourcing standards, and support for suppliers' organizations. Conclusions - Our suggestions for a collaborative system (based on the three suggestions) show that collaboration rather than confrontation between large and small markets can lead to a sales increase of 2,258.2 billion Won, which is equivalent to the sales loss in 11 traditional markets in one year in Busan.

• Korean Journal of Veterinary Research
• /
• v.56 no.3
• /
• pp.201-203
• /
• 2016

Intestinal rupture caused by small bowel volvulus was diagnosed in a captive 13-year-old male American black bear. The animal presented with decreased appetite, depression, lethargy, and mild abdominal distention for 3 days. The animal was treated with antibiotics, hypermetabolites, and digestive medicine daily; however, it died on the third day of treatment. The clinical symptoms included hemorrhagic ascites, gaseous extension of the small intestine, and intestinal rupture caused by small bowel volvulus. Hemorrhagic signs were observed in the lungs and heart. This is the first case to describe small bowel volvulus in mammals of the family Ursidae.

• KSTLE International Journal
• /
• v.7 no.2
• /
• pp.51-55
• /
• 2006

In order to design an effective foot surface which can provide adequate friction for a self-propelled medical microrobot moving inside the small intestine, frictional mechanisms between the small intestine inner wall and the foot surface of the robot must be understood. In this paper, mechanical interlocking effect was considered to design the surface of the foot that can generate the desired frictional force. The concept of the design was derived from the hookworm that lives inside the small intestine. Hookwarms are known to adhere to the small intestine wall by interlocking with villi on the surface of the small intestine. The interlocking mechanism was considered as the main frictional mechanism for the design of the microrobot foot surface in this work. 2 mm and 6 mm diameter solid and hollow cylindrical shaped foot specimens were designed and tested to assess the frictional force between the specimens and the porcine small intestine specimen.

• Management & Information Systems Review
• /
• v.8
• /
• pp.1-23
• /
• 2002

Technical innovation is very important in the small and medium enterprises. All successful innovation stars from a creative ideas, it be a new application for a technology, the satisfaction of a new identified need or of an old need in a new way, or the manufacture of a product by a different method. The purpose of this study is to investigate into the implementation effect of IMS(information management system) for information in small and medium enterprises. This research analysis was done as to small and medium enterprises of 24. The Results for this research analysis was as follows. First, the satisfaction scored 4.10 in information level up of the small and medium enterprises. Second, increased effect productivity scored 3.37 in samples of 17. Thrid, increased management efficiency productivity scored 3.14 in samples of 17.