• 산업융합연구
• /
• 제22권2호
• /
• pp.63-71
• /
• 2024

기존 스마트폰에서 사용된 PIN과 같은 인증기법은 디스플레이 구조의 변형 또는 화면 크기의 가변성에 대한 고려가 이루어지지 않아 최근의 가변 디스플레이 기반 스마트폰에 적용될 경우 비밀정보 입력부의 축소나 확대로 발생 가능한 취약점과 같은 디스플레이 면적의 변형에 따른 사회공학 공격에 대한 취약점이 있다. 본 연구는 롤러블 및 벤더블 스마트폰과 같이 디스플레이 크기 변화에 대응하는 보안 키패드를 제안한다. 이를 위해 우선 각 기존 인증기법에서 새로운 폼팩터에 적용될 경우 발생할 수 있는 보안 문제를 분석하였으며 이에 대응하는 보안 요구사항을 도출하였다. 제안하는 보안 키패드는 롤러블 및 벤더블 스마트폰의 디스플레이 크기에 따라 입력에 적합한 간격과 크기로 키의 배열 및 배치가 변형 가능하므로 화면 크기가 작을 때 발생할 수 있는 키 입력 오류 문제를 고려하였다. 또한, 키 입력 좌표를 불규칙적으로 분산하여 사회공학 공격에 대한 입력 정보 유출 문제도 고려하였다. 제안 기법은 다양한 크기와 형태의 스마트폰에서 사용할 수 있어 기존 기법보다 더 나은 사용자 경험과 보안성을 제공한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.422-425
• /
• 2008

Recently, electronic products and related parts are required to have thin thickness because of small form factor. To go with the trend, LGP(light guide plate) of LCD BLU(Liquid Crystal Display Back light unit: It is one of kernel parts of LCD) for cell phone has the thickness of 0.3 mm and the battery case of cell phone has 0.25 mm. Accordingly, high speed injection molding is required to make products which have thin thickness. High speed injection molding means that the resin is injected into the cavity at higher than normal speed avoiding short shot. In the case of hydro-mechanical high speed injection machine, it requires the design for hydraulic unit to make high injection speed and the design for control unit to control hydraulic unit. In the present paper, we concentrated on the molding stability of hydro-mechanical high speed injection machine to make an LGP of 0.3 mm thickness.

• 패션비즈니스
• /
• 제13권6호
• /
• pp.137-146
• /
• 2009

This study analyzed hierarchy of image for visual evaluation of flare skirt. This study analyzed expression words about flare skirt with frequency data of image expression words with different length and volume of flare. Stimuli for the study were set to be 4 different volume of flare ($90^{\circ}$, $180^{\circ}$, $270^{\circ}$, $360^{\circ}$) and 3 different length of skirt(48cm, 58cm, 68cm). Stimuli were made by using I-Designer which is Virtual Sewing System. From simulation of flare skirt, the subjects were asked to write down suggested adjective freely and selected 210 adjectives. With this, we chose total 38 adjectives considering frequencies in the pre-study. And we analyzed the combination process of expression words according to construction factor of flare skirt and hierarchy of image from dendrogram which was resulted by hierarchical cluster analysis. 'Feminine' got high score in all 12 flare skirt. When the skirt was short, it was vivid, and as the skirt got longer, ordinary and pure image showed. Also, as the volume of flare got larger, the average of visual effect was higher than visual image. Visual hierarchy construction according to construction factors of flare skirt could be divided into visual image and visual effect, and visual image was shown to be form 'A type - large volume of flare and short skirt length', 'H type-small volume of flare and short skirt length' and 'X type - large volume of flare and long skirt length'.

• 재활복지공학회논문지
• /
• 제7권2호
• /
• pp.7-12
• /
• 2013

본 논문에서는 동력의지를 위한 브러쉬리스 DC 모터 구동 시스템과 DC 링크단의 전류를 이용하여 상전류를 추정하는 기법을 제안한다. 토크제어를 위해서는 전류 측정이 매우 중요하며 전류 측정 시 스위칭 노이즈를 최소화하기 위해 전류 센싱 시점은 스위칭 전압 명령에 동기화 되어야 한다. 저가의 시스템, 공간의 절약 그리고 제어의 단순화하기 위해 DC 링크단 전류를 사용한 제어를 실시하였다. 또한 환류 다이오드를 통해 흐르는 전류에서 발생하는 DC 링크단 전류와 상전류간의 오차를 줄이기 위해 Analog MUX를 이용한 상전류 추정방법을 사용하였다. 실험 결과를 통해 제안한 시스템의 유효성을 검증하였다.

• Parasites, Hosts and Diseases
• /
• 제52권2호
• /
• pp.131-135
• /
• 2014

Acanthamoeba cysts are resistant to unfavorable physiological conditions and various disinfectants. Acanthamoeba cysts have 2 walls containing various sugar moieties, and in particular, one third of the inner wall is composed of cellulose. In this study, it has been shown that down-regulation of cellulose synthase by small interfering RNA (siRNA) significantly inhibits the formation of mature Acanthamoeba castellanii cysts. Calcofluor white staining and transmission electron microscopy revealed that siRNA transfected amoeba failed to form an inner wall during encystation and thus are likely to be more vulnerable. In addition, the expression of xylose isomerase, which is involved in cyst wall formation, was not altered in cellulose synthase down-regulated amoeba, indicating that cellulose synthase is a crucial factor for inner wall formation by Acanthamoeba during encystation.

• ETRI Journal
• /
• 제42권4호
• /
• pp.480-490
• /
• 2020

More than 42 000 fires occur nationwide and cause over 2500 casualties every year. There is a lack of specialized equipment, and rescue operations are conducted with a minimal number of apparatuses. Through-the-wall radars (TTWRs) can improve the rescue efficiency, particularly under limited visibility due to smoke, walls, and collapsed debris. To overcome detection challenges and maintain a small-form factor, a TTWR system-on-chip (SoC) and its architecture have been proposed. Additive reception based on coherent clocks and reconfigurability can fulfill the TTWR demands. A clock-based single-chip infrared radar transceiver with embedded control logic is implemented using a 130-nm complementary metal oxide semiconductor. Clock signals drive the radar operation. Signal-to-noise ratio enhancements are achieved using the repetitive coherent clock schemes. The hand-held prototype radar that uses the TTWR SoC operates in real time, allowing seamless data capture, processing, and display of the target information. The prototype is tested under various pseudo-disaster conditions. The test standards and methods, developed along with the system, are also presented.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.467-472
• /
• 2005

Load/Unload(L/UL) technology includes the benefits, that is, increased areal density, reduced power consumption and improved shock resistance contrary to contact start stop(CSS). It has been widely used in portable hard disk drive and will become the key technology for developing the small form factor hard disk drive. The main objectives of L/UL are no slider disk contact or no media damage. For realizing those, we must consider many design parameters in L/UL systems. In this paper, we focus on the effect of the ramp profile. We can find out the lateral velocities in L/UL process through experiments and simulations for force of voice coil motor and friction force on ramp. And then, we will gain the optimal design of ramp slope to maintain the minimum clearance of suspension dimple and slider with FE model. In special, after finding the point at which air bearing breaks and designing the ramp, we will identify the results for improving unload performance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1272-1275
• /
• 2007

The HDD (hard disk drive) using Load/Unload (L/UL) technology includes the benefits which are increased areal density, reduced power consumption and improved shock resistance than those of contact-start-stop (CSS). Dynamic L/UL has been widely used in portable hard disk drive and will become the key technology for developing the small form factor hard disk drive. Main design objectives of the L/UL mechanisms are no slider-disk contact or no media damage even with contact during L/UL, and a smooth and short load and unload process. In this paper, we focus on state matrix, pitch static attitude (PSA), roll static attitude (RSA), loading/unloading contour (LC/ULC), impact force and contact. Stability of slider is mainly determined by PSA and RSA. State matrix by PSA and RSA is also important indicator. Therefore we analyze state matrix of SFF HDD suspension through the LC/ULC.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.609-612
• /
• 2007

The HDD (hard disk drive) using Load/Unload (L/UL) technology includes the benefits which are increased areal density, reduced power consumption and improved shock resistance than those of contact-start-stop (CSS). Dynamic L/UL has been widely used in portable hard disk drive and will become the key technology for developing the small form factor hard disk drive. The main design objectives of the L/UL mechanisms are no slider-disk contact or no media damage even with contact during L/UL, and a smooth and short unloading process. In this paper, we focus on lift-off force, pitch static attitude (PSA), roll static attitude (RSA) and dimple point. The "lift-off" force, defined as the minimum air bearing force, is another very important indicator of unloading performance. A large amplitude of lift-off force increases the ramp force, the unloading time, the slider oscillation and contact-possibility. PSA and RSA are also very important parameters in L/UL system and stability of slider is mainly determined by PSA and RSA. Dimple point by PSA and RSA is also important indicator. Therefore we find the optimal dimple point of SFF HDD suspension for improving the unloading performance.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1556-1565
• /
• 2017

This paper depicts the design, implementation and analysis of efficient resonant based wireless power transfer (WPT) technique using three magnetic coupled coils. This work is suitable for mid ranged device due to small form factor while minimizing the loading effect. A multi turned loop size resonator is exploited for both the transmitter and receiver for longer distance. In this paper, class-E power amplifier (class-E PA) is introduced with an optimum power tracking mechanism of WPT system to enhance the power capability at mid-range with a flat gain. A robust method of finding optimum distance is derived with an experimental analysis of the designed system. In this method, the load sensitive issue of WPT is resolved by tuning coupling coefficient at considerable distances. Our designed PA with a drain efficiency of 77.8% for a maximum output of 5W is used with adopted tuning technique that improves the overall WPT system performance by 3 dB at various operating points.