• Journal of Radiation Protection and Research
• /
• v.40 no.4
• /
• pp.194-201
• /
• 2015

We have investigated the EPR signal properties in 12 components of two mobile phones (LCD, OLED) using electron paramagnetic resonance (EPR) spectrometer in this study.EPR measurements were performed at normal atmospheric conditions using Bruker EXEXSYS-II E500 spectrometer with X-band bridge, and samples were irradiated by $^{137}Cs$ gamma-ray source. To identify the presence of radiation-induced signal (RIS), the EPR spectra of each sample were measured unirradiated and irradiated at 50 Gy. Then, dose-response curve and signal intensity variating by time after irradiation were measured. As a result, the signal intensity increased after irradiation in all samples except the USIM plastic and IC chip. Among the samples, cover glass(CG), lens, light guide plate(LGP) and diffusion sheet have shown fine linearity ($R^2$ > 0.99). Especially, the LGP had ideal characteristics for dosimetry because there were no signal in 0 Gy and high rate of increase in RIS. However, this sample showed weakness in fading. Signal intensity of LGP and Diffusion Sheet decreased by 50% within 72 hours after irradiation, while signals of Cover Glass and Lens were stably preserved during the short period of time. In order to apply rapidly EPR dosimetry using mobile phone components in large-scale radiation accidents, further studies on signal differences for same components of the different mobile phone, fading, pretreatment of samples and processing of background signal are needed. However, it will be possible to do dosimetry by dose-additive method or comparative method using unirradiated same product in small-scale accident.

• Korean Security Journal
• /
• no.27
• /
• pp.129-159
• /
• 2011

Physical security has always been an extremely important facet within the security arena. A comprehensive security plan consists of three components of physical security, personal security and information security. These elements are interrelated and may exist in varying degrees defending on the type of enterprise or facility being protected. The physical security component of a comprehensive security program is usually composed of policies and procedures, personal, barriers, equipment and records. Human beings kept restless struggle to preserve their and tribal lives. However, humans in prehistoric ages did not learn how to build strong house and how to fortify their residence, so they relied on their protection to the nature and use caves as protection and refuge in cold days. Through the history of man, human has been establishing various protection methods to protect himself and his tribe's life and assets. Physical security methods are set in the base of these security methods. Those caves that primitive men resided was rounded with rock wall except entrance, so safety was guaranteed especially by protection for tribes in all directions. The Great Wall of China that is considered as the longest building in the history was built over one hundred years from about B.C. 400 to prevent the invasion of northern tribes, but this wall enhanced its protection function to small invasions only, and Mongolian army captured the most part of China across this wall by about 1200 A.D. European lords in the Middle Ages built a moat by digging around of castle or reinforced around of the castle by making bascule bridge, and provided these protections to the resident and received agricultural products cultivated. Edwin Holmes of USA in 20 centuries started to provide innovative electric alarm service to the development of the security industry in USA. This is the first of today's electrical security system, and with developments, the security system that combined various electrical security system to the relevant facilities takes charging most parts of today's security market. Like above, humankind established various protection methods to keep life in the beginning and its development continues. Today, modern people installed CCTV to the most facilities all over the country to cope with various social pathological phenomenon and to protect life and assets, so daily life of people are protected and observed. Most of these physical security systems are installed to guarantee our safety but we pay all expenses for these also. Therefore, establishing effective physical security system is very important and urgent problem. On this study, it is suggested methods of establishing effective physical security system by using system integration on the principle of security design about effective security system's effective establishing method of physical security system that is increasing rapidly by needs of modern society.

• Journal of Distribution Research
• /
• v.17 no.1
• /
• pp.65-86
• /
• 2012

The $20^{th}$ century was the era of manufacturer brands which built higher brand equity for consumers. Consumers moved from generic products of inconsistent quality produced by local factories in the $19^{th}$ century to branded products from global manufacturers and manufacturer brands reached consumers through distributors and retailers. Retailers were relatively small compared to their largest suppliers. However, sometime in the 1970s, things began to slowly change as retailers started to develop their own national chains and began international expansion, and consolidation of the retail industry from mom-and-pop stores to global players was well under way (Kumar and Steenkamp 2007, p.2) In South Korea, since the middle of the 1990s, the bulking up of retailers that started then has changed the balance of power between manufacturers and retailers. Retailer private labels, generally referred to as own labels, store brands, distributors own private-label, home brand or own label brand have also been performing strongly in every single local market (Bushman 1993; De Wulf et al. 2005). Private labels now account for one out of every five items sold every day in U.S. supermarkets, drug chains, and mass merchandisers (Kumar and Steenkamp 2007), and the market share in Western Europe is even larger (Euromonitor 2007). In the UK, grocery market share of private labels grew from 39% of sales in 2008 to 41% in 2010 (Marian 2010). Planet Retail (2007, p.1) recently concluded that "[PLs] are set for accelerated growth, with the majority of the world's leading grocers increasing their own label penetration." Private labels have gained wide attention both in the academic literature and popular business press and there is a glowing academic research to the perspective of manufacturers and retailers. Empirical research on private labels has mainly studies the factors explaining private labels market shares across product categories and/or retail chains (Dahr and Hoch 1997; Hoch and Banerji, 1993), factors influencing the private labels proneness of consumers (Baltas and Doyle 1998; Burton et al. 1998; Richardson et al. 1996) and factors how to react brand manufacturers towards PLs (Dunne and Narasimhan 1999; Hoch 1996; Quelch and Harding 1996; Verhoef et al. 2000). Nevertheless, empirical research on factors influencing the production in terms of a manufacturer-retailer is rather anecdotal than theory-based. The objective of this paper is to bridge the gap in these two types of research and explore the factors which influence on manufacturer's private label production based on two competing theories: S-C-P (Structure - Conduct - Performance) paradigm and resource-based theory. In order to do so, the authors used in-depth interview with marketing managers, reviewed retail press and research and presents the conceptual framework that integrates the major determinants of private labels production. From a manufacturer's perspective, supplying private labels often starts on a strategic basis. When a manufacturer engages in private labels, the manufacturer does not have to spend on advertising, retailer promotions or maintain a dedicated sales force. Moreover, if a manufacturer has weak marketing capabilities, the manufacturer can make use of retailer's marketing capability to produce private labels and lessen its marketing cost and increases its profit margin. Figure 1. is the theoretical framework based on a strategic market management perspective, integrated concept of both S-C-P paradigm and resource-based theory. The model includes one mediate variable, marketing capabilities, and the other moderate variable, competitive intensity. Manufacturer's national brand reputation, firm's marketing investment, and product portfolio, which are hypothesized to positively affected manufacturer's marketing capabilities. Then, marketing capabilities has negatively effected on private label production. Moderating effects of competitive intensity are hypothesized on the relationship between marketing capabilities and private label production. To verify the proposed research model and hypotheses, data were collected from 192 manufacturers (212 responses) who are producing private labels in South Korea. Cronbach's alpha test, explanatory / comfirmatory factor analysis, and correlation analysis were employed to validate hypotheses. The following results were drawing using structural equation modeling and all hypotheses are supported. Findings indicate that manufacturer's private label production is strongly related to its marketing capabilities. Consumer marketing capabilities, in turn, is directly connected with the 3 strategic factors (e.g., marketing investment, manufacturer's national brand reputation, and product portfolio). It is moderated by competitive intensity between marketing capabilities and private label production. In conclusion, this research may be the first study to investigate the reasons manufacturers engage in private labels based on two competing theoretic views, S-C-P paradigm and resource-based theory. The private label phenomenon has received growing attention by marketing scholars. In many industries, private labels represent formidable competition to manufacturer brands and manufacturers have a dilemma with selling to as well as competing with their retailers. The current study suggests key factors when manufacturers consider engaging in private label production.

• Journal of Intelligence and Information Systems
• /
• v.18 no.3
• /
• pp.153-169
• /
• 2012

Exhibitions have played a key role of effective marketing activity which directly informs services and products to current and potential customers. Through participating in exhibitions, exhibitors have got the opportunity to make face-to-face contact so that they can secure the market share and improve their corporate images. According to this economic importance of exhibitions, show organizers try to adopt a new IT technology for improving their performance, and researchers have also studied services which can improve the satisfaction of visitors through analyzing visit patterns of visitors. Especially, as smart technologies make them monitor activities of visitors in real-time, they have considered booth recommender systems which infer preference of visitors and recommender proper service to them like on-line environment. However, while there are many studies which can improve their performance in the side of new technological development, they have not considered the choice factor of visitors for booth recommender systems. That is, studies for factors which can influence the development direction and effective diffusion of these systems are insufficient. Most of prior studies for the acceptance of new technologies and the continuous intention of use have adopted Technology Acceptance Model (TAM) and Extended Technology Acceptance Model (ETAM). Booth recommender systems may not be new technology because they are similar with commercial recommender systems such as book recommender systems, in the smart exhibition environment, they can be considered new technology. However, for considering the smart exhibition environment beyond TAM, measurements for the intention of reuse should focus on how booth recommender systems can provide correct information to visitors. In this study, through literature reviews, we draw factors which can influence the satisfaction and reuse intention of visitors for booth recommender systems, and design a model to forecast adaptation of visitors for booth recommendation in the exhibition environment. For these purposes, we conduct a survey for visitors who attended DMC Culture Open in November 2011 and experienced booth recommender systems using own smart phone, and examine hypothesis by regression analysis. As a result, factors which can influence the satisfaction of visitors for booth recommender systems are the effectiveness, perceived ease of use, argument quality, serendipity, and so on. Moreover, the satisfaction for booth recommender systems has a positive relationship with the development of reuse intention. For these results, we have some insights for booth recommender systems in the smart exhibition environment. First, this study gives shape to important factors which are considered when they establish strategies which induce visitors to consistently use booth recommender systems. Recently, although show organizers try to improve their performances using new IT technologies, their visitors have not felt the satisfaction from these efforts. At this point, this study can help them to provide services which can improve the satisfaction of visitors and make them last relationship with visitors. On the other hands, this study suggests that they managers along the using time of booth recommender systems. For example, in the early stage of the adoption, they should focus on the argument quality, perceived ease of use, and serendipity, so that improve the acceptance of booth recommender systems. After these stages, they should bridge the differences between expectation and perception for booth recommender systems, and lead continuous uses of visitors. However, this study has some limitations. We only use four factors which can influence the satisfaction of visitors. Therefore, we should development our model to consider important additional factors. And the exhibition in our experiments has small number of booths so that visitors may not need to booth recommender systems. In the future study, we will conduct experiments in the exhibition environment which has a larger scale.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.3
• /
• pp.58-74
• /
• 2018

This study aims to propose baseline data for designing restoration of Gaobyulup, researching space formation and characteristics of gardens of Gaobyulup, which located in the foot of Cheonmasan Mountain in Namyangju. Gaobyulup is a remain in retirement of Gyulsan Yu-Won Lee, a representative politician, administrator, and tea drinker in late Joseon Dynasty. The results of the research about the shape of Gaobyulup deducted through reference review, poetry and prose analysis, an on-the-spot survey and residents' interview are below: Lee, who used pseudonym as 'Gyulsan,' which menas Jongnamsan Mountain, yearned Mangcheonbyeoreop(輞川別業) by Yu Wang and retirement with a country house operation by Seogye Sedang Park. In the persuit of this ideal, he created and operated a country house in Gaogok of Yangju, which a family burial ground was located. Gaobyulup, which located in Gaogok in the lower part of Cheonmasan Mountain, was largely composed outer and inner gardens, and the area of house operation was started from a stone post of Gaobokji The inner garden of Gaobyulup was including major garden components like buildings, such as Sasihyanggwan, Obaekganjung, Imharyoe and Toesadam, and Chaewon near Haengrangchae, and Gwawon in an backyard. In addition, Younggwijung pavilion, which located 850m away from Gaobyulup, was the another country house inside the Byulup, thus Gaobyulup shows a duplex space formation. In the inner garden of Gaobyulup, there are Sasihyanggwan, which had functions of Sarangchae as library and depository of old paintings and calligraphic works, and Obaekganjung, a small Sarangchae which connected with Sasihyanggwan in the form of a transept. Yusanggoksuger located near Obaekganjung. Additionally, Imharyeo, a library with a tablet of Byeokryowon(??園), which located in the highest point in Byulup, has the functions of a reading room and a tea house. Many Taihu stones were located not only in Toesadam, a square-formed pond with lotus but also many places in the inner gardens. And rare garden plants were planted. These were closely related to the trend of horticulture for pleasure, wealth, and collecting old paintings and calligraphic works for pleasure of Lee. Meanwhile, the area of Younggwijung pavilion, located in Gaocheon stream fall from Byulup to Manhoiam, looks like Wooampok, a enjoying place of other personages, who use their pseudonym as "Oksan" or "Wooam" Lee identifies Wooampok as "Jesampok" and carved 'Gyulsan' s he declared this place is his operating area. Lee built Younggwijung pavilion and planted many peach trees for recreation of utopia. The stone letters of Byukpadongcheon, located in front of a bridge in the foreside of Younggwijung pavilion, seems another enchanted land created in Gaobokji inside. Lee carved Jeilsan in huge rock on the falls rear Manhoiam temple, which Lee did great role of foundation of the temple, so he identifies that this place was the end of the outer garden of Gaobyulup. This study tries to estimate traces of the country house in Gaogok through reference review and on-th-spot survey, and the results from this study are presumed based on site remains only conformed today. It needs to discover second scenary or stone carved letters between Jeilsan and Jesampok. Additionally, exact formation characteristics of Gaobyulup should be identified through excavation survey later. To do so, an interest and a major role of Namyangju-si must be equipped for future restoration of Gaobyulup.

• Korean Journal of Heritage: History & Science
• /
• v.37
• /
• pp.65-89
• /
• 2004

Up to now, the studies for a pond of ancient palace of Korea are mainly achieved in a landscape architectural field. In fact, we can't grasp the general aspects but we are only heard about the fragmentary ruins and remains by the people who are in charge of an archaeological excavation. In this thesis, therefore, I attempt to grasp the relational categories of the ponds of an ancient palace of Korea, and find out the ideological backgrounds of the ponds of a palace construction through classify them excavated so far. The ancient ponds of Korea are divided to the class of square ponds(I) and curved ponds(II) according a shapes of planes. The class of square ponds(I) are subdivided to the form IA of the class of square ponds and form IB of the class of square ponds by whether it has an island, artificial hill and ornamental stone or not. And the class of the curved ponds(II) are divided to the form IIC that is only composed of curves in shore and the form IID that is composed of curves and straight lines. According the size, it is divided to a small size that is below the maximal diameter, 20m, and a large size that is more than 45m, after all, the ponds of the ancient palaces are devided to IAa, IAb, IBa, II Ca, IICb, IIDa. The square ponds and the curved ponds are co-exist from the initial stage when a pond of a place was found in our country and are succeeded or changed after Silla unified the three Kingdoms. In other words, we can infer a continuity from the earlier stage from the fact that there is a flat figure ground mainly constituted by the ponds of a palace mixed up of a straight line and a curved line in United Silla Kingdom while it succeeds the ponds of a palace that has a square form of Goguryo in Balhai. Different from the successional relation of the flat figure grounds, in an aspect of the elements of the construction, the site of the arbor at the top of the island and the bridge facilities in a field of a palace those are not exist in three Kingdoms period are appeared in United Silla Kingdom. The point that this aspect is simultaneously appeared in a neighboring country, or Japan, allows us to infer that there may be some motivations cause the changes in a construction of the ponds of a palace of Korea, China and Japan from the latter half of the 7th century to the first half of the 8th century. The ideological backgrounds of the ponds of a palace construction are divided roughly into Taoism and Buddhism. We can recognize that the ponds of a palace made up of the islands, the artificial hills and the garden rocks reflect Taiosm, considering the records of the ponds a palace of Korea and China are all use the term, Taoism, or the concrete statement represents that the islands, the artificial hills and the garden rocks are used in the description of the ponds of a palace of Korea. Both two are, therefore, obviously differentiated from the ponds of a palace that doesn't include them. We can conclude that the ponds of a palace that doesn't include them are colored by Buddhism since they are overtly distinguished from the class of curved ponds that reflect Taoism at the same period and they are identical with the site of an ancient temples in an aspect of their type and construction.