• Journal of Mechanical Science and Technology
• /
• v.15 no.9
• /
• pp.1217-1225
• /
• 2001

The governing equations are derived for the analysis of a stepped labyrinth gas seal generally used in high performance compressors, gas turbines, and steam turbines. The bulk-flow is assumed for a single cavity control volume set up in a stepped labyrinth cavity and the flow is assumed to be completely turbulent in the circumferential direction. The Moodys wall-friction-factor model is used for the calculation of wall shear stresses in the single cavity control volume. For the reaction force developed by the stepped labyrinth gas seal, linearized zeroth-order and first-order perturbation equations are developed for small motion about a centered position. Integration of the resultant first-order pressure distribution along and around the seal defines the rotordynamic coefficients of the stepped labyrinth gas seal. The resulting leakage and rotordynamic characteristics of the stepped labyrinth gas seal are presented and compared with Scharrers theoretical analysis using Blasius wall-friction-factor model. The present analysis shows a good qualitative agreement of leakage characteristics with Scharrers analysis, but underpredicts by about 20%. For the rotordynamic coefficients, the present analysis generally yields smaller predictied values compared with Scharrers analysis.

• The KSFM Journal of Fluid Machinery
• /
• v.4 no.2 s.11
• /
• pp.15-21
• /
• 2001

Basic equations and their solution procedure we derived for the analysis of an annular pump seal in which the rotor has a large static displacement from the centered position. The Bulk-flow is assumed for a control volume set in the seal clearance and the flow is assumed to be completely turbulent in axial and circumferential direction. Moody's wall-friction-factor formula is used for the calculation of wall shear stresses in the control volume. For the reaction force developed by the seal, linearized zeroth-order and first-order perturbation equations are developed for small motion about an eccentric position. Flow variables are expanded by using Fourier series for the solution procedure. Integration of the resultant first-order pressure distribution along and around the seal defines the 12 elements of rotordynamic coefficients of the eccentric annular pump seal. The results of leakage and rotordynamic coefficients aye presented and compared with the Marquette's experimental results and the San Andres' theoretical analysis.

• Tribology and Lubricants
• /
• v.18 no.1
• /
• pp.24-33
• /
• 2002

The basic equations are derived for the analysis of a staggered labyrinth gas seal which are generally used in high performance compressors and steam turbines. The Bulk-flow is assumed for a single cavity control volume and the flow is assumed to be completely turbulent in circumferential direction. Moody's wall-friction-factor formula is used for the calculation of wall shear stresses in the single cavity control volume. For the reaction force developed by the seal, linearized zeroth-order and first-order perturbation equations are developed for small motion about a centered position. Integration of the resultant first-order pressure distribution along and around the seal defines the rotordynamic coefficients of the staggered labyrinth gas seal. Theoretical results of leakage and rotordynamic characteristics for the staggered labyrinth gas seal are compared with those of the plain seal and see-through labyrinth seal.

• Journal of the Korean Ceramic Society
• /
• v.56 no.4
• /
• pp.331-339
• /
• 2019

While high-temperature ceramic composites consisting of carbides, borides, and nitrides, the so-called ultra-high-temperature ceramics (UHTCs), have been commonly produced through solid-state sintering, melt-solidification is an alternative method for their manufacture. As many UHTCs are binary or ternary eutectic systems, they can be melted and solidified at a relatively low temperature via a eutectic reaction. The microstructure of the eutectic composites is typically rod-like or lamellar, as determined by the volume fraction of the second phase. Directional solidification can help fabricate more sophisticated UHTCs with highly aligned textures. This review describes the fabrication of UHTCs through the eutectic reaction and explains their mechanical properties. The use of melt-solidification has been limited to small specimens; however, the recently developed laser technology can melt large-sized UHTCs, suggesting their potential for practical applications. An example of laser melt-solidification of a eutectic ceramic composite is demonstrated.

• Journal of Korea Foundry Society
• /
• v.20 no.4
• /
• pp.247-253
• /
• 2000

Titanium was melted in the CaO-coated alumina crucible and the reaction between the melt and the coating layer was negligible. The volume fraction of the gas porosity was decreased with increasing pressure and the sound bar castings with no porosity was obtained under the Ar atmosphere of the pressure of $300kN/mm^2$. The surface of the casting obtained from CaO-coated graphite mold was slightly rougher than that from graphite without coating. The reaction product of titanium melt with the layer of CaO was mainly titanium oxide and that with graphite crucible was titanium cabide with small amount of titanium nitride.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.2
• /
• pp.79-83
• /
• 1987

The reduction of a series of 1-substituted benzyl-3-cyanoquinolinium ions (p-$cH_3$, H, p-Br, m-F, p-CN) by sodium borohydride has been investigated. In all cases the products from these reactions were found to be 1, 2-dihydroquinolines over 82% yields. Rates of reduction were measured in basic condition and in solvent system consisting of 4 parts of isopropyl alcohol and 1 part of water by volume. Second order rate constants were obtained for these reactions. When the ratio of [$OH^-$] to [$BH_4^-$] becomes large the observed rate constants ($K_{obs}$) decrease by a small factor. Reaction scheme and rate law are discussed. Bronsted ${\alpha}(=\frac{d\;In\;k}{d\;In\;K})$ obtained by using the value of equilibrium constant K, which was obtained previously, was not 0. Instead, a value of 0.36 was obtained which indicated that the reduction by borohydride was structure-dependent according to the Marcus formalism even though the reaction rate was close to the diffusion limit.

• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.32-38
• /
• 2006

A premixed flame propagating in a tube suffers strong variation in its shape and structure depending on boundary conditions. The effects of thermal boundary conditions and flow fields on flame propagation are numerically investigated. Navier-Stokes equations and species equations are solved with a one-step irreversible global reaction model of methane-air mixture. Finite volume method using an adaptive grid method is applied to investigate the flame structure. In the case of an adiabatic wall, friction force on the wall significantly affected the flame structure while in the case of an isothermal wall, local quenching near the wall dominated flame shapes and propagation. In both cases, variations of flow fields occurred not only in the near field of the flame but also within the flame itself, which affected propagation velocities. This study provides an overview of the characteristics of flames in small tubes at a steady state.

• KSBB Journal
• /
• v.18 no.5
• /
• pp.429-433
• /
• 2003

LAL (Limulus amebocyte lysate) test to detect and quantity endotoxin is based on gellation reaction between endotoxin and LAL from a blood extract of Limulus polyphemus. The test is labor intensive requiring dedicated personnel, takes relatively long reaction time (approximately 1 hr), requires relatively large volume of samples and reagents, and its end-point detection method is rather subjective. To solve these problems, we attempted to develop a miniaturized LOC (lab-on-a-chip) prototype using PDMS and glass. Using the 62 mm (length) ${\times}$ 18 mm (width) prototype in which 2 mm (width) ${\times}$ 44.34 mm (length) ${\times}$ 100 $\mu\textrm{m}$ (depth) microfluidic channel was provided, we compared the various detection methods of gellation, turbidometric, and chromogenic assays to find the chromogenic method to be the most suitable for small volume assay. In this assay, kinetic point method was more accurate than end point method. We also found the PDMS chip thickness should be minimized to around 2 mm to allow sufficient light transmittance, which necessitated a glass slide bonding for chip rigidity. Through the miniaturization, the test time was reduced from 1 hr to less than 10 minutes, and the sample volume could be reduced from 100 ${\mu}\ell$ to 4.4 ${\mu}\ell$. In sum, this study revealed that the mini LOC could be an alternative for a semi-automated and reliable method for LAL test.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.6
• /
• pp.773-777
• /
• 1999

Scale-up experiments for hydrolysis of beef tallow, fat, and palm kernel with lipase derived from Candida cylindracea were carried out in 1-1, 100-1, and 10,000-1 reactors. The optimum agitation speed for the hydrolysis of the 1-1 reactor was investigated and found to be 350rpm, and this was a basis for the scale-up of agitation speed. The hydrolysis system in this work was the oil-water system in which the hydrolysis seems to process a heterogeneous reaction. An emulsion condition was the most important factor for determining the reaction rate of hydrolysis. Therefore, the scale-up of agitation speed was performed by using the power n = 1/3 in an equation of the rules of thumb method. The geometrical similarity for scaling-up turned out to be unsatisfactory in this study. Thus, the working volume per one agitator was used for the scale-up. In the case of scale-up from a 1-1 reactor to a 100-1 reactor, the hydrolysis of palm kernel was very much scaled-up by initiating the rules of thumb method. However, the hydrolysis of fat and beef tallow in a 100-1 reactor was a little higher than that of the 1-1 reactor because of the difference of geometrical similarity. The scale-up of hydrolysis from the 100-1 reactor to the 10,000-1 reactor was improved compared to that of the 1-1 to 100-1 reactor. The present results indicated that the scale-up of hydrolysis in the oil-water system by the rules of thumb method was more satisfactory under the condition of geometrical similarity. Even in the case where geometrical similarity was not satisfactory, the working volume per one agitator could be used for the scale-up of a heterogeneous enzyme reaction.

• Journal of Sensor Science and Technology
• /
• v.14 no.5
• /
• pp.337-342
• /
• 2005

A silicon-based micro-reactor to amplify small amount of deoxyribonucleic acid (DNA) has been fabricated using micro-electro-mechanical systems (MEMS) technology. Polymerase chain reaction (PCR) of DNA requires a precise and rapid temperature control. A Pt sensor is integrated directly in the chamber for real-time temperature measurement and an infrared lamp is used as external heating source for non-contact and rapid heating. In addition to the real-time temperature sensing, PCR needs a rapid thermocycling for effective PCR. For a fast thermal response, the thermal mass of the reactor chamber is minimized by removal of bulk silicon volume around the reactor using double-side KOH etching. The transparent optical property of silicon in the infrared wavelength range provides an efficient absorption of thermal energy into the reacting sample without being absorbed by silicon reactor chamber. It is confirmed that the fabricated micro-reactor could be heated up in less than 30 sec to the denaturation temperature by the external infrared lamp and cooled down in 30 sec to the annealing temperature by passive cooling.