• Korean Journal of Computational Design and Engineering
• /
• v.15 no.5
• /
• pp.354-361
• /
• 2010

The paper presents an efficient computation of optimal tool length for 5-axis mold & die machining. The implemented procedure processes an NC file as an initial input, where the NC data is generated by another commercial CAM system. A commercial CAM system generates 5-axis machining NC data which, in its own way, is optimal based on pre-defined machining condition such as tool-path pattern, tool-axis control via inclination angles, etc. The proper tool-length should also be provided. The tool-length should be as small as possible in order to enhance machinability as well as surface finish. A feasible tool-length at each NC block can be obtained by checking interference between workpiece and tool components, usually when the tool-axis is not modified at this stage for most CAM systems. Then the minimum feasible tool-length for an NC file consisting of N blocks is the maximum of N tool-length values. However, it can be noted that slight modification of tool-axis at each block may reduce the minimum feasible tool-length in mold & die machining. This approach can effectively be applied in machining feature regions such as steep wall or deep cavity. It has been implemented and is used at a molding die manufacturing company in Korea.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.2
• /
• pp.161-169
• /
• 2016

This paper is intended to propose a novel approach to select an optimal site for a small-scaled artificial recharge system installation using TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) with geospatial data. TOPSIS is a MCDM (Multi-Criteria Decision Making) method to choose the preferred one of derived alternatives by calculating the relative closeness to an ideal solution. For applying TOPSIS, in the first, the topographic shape representing optimal recovery efficiency is defined based on a hydraulic model experiment, and then an appropriate surface slope is determined for the security of a self-purification capability with DEM (Digital Elevation Model). In the second phase, the candidate areas are extracted from an alluvial map through a morphology operation, because local alluvium with a lengthy and narrow shape could be satisfied with a primary condition for the optimal site. Thirdly, a shape file over all candidate areas was generated and criteria and their values were assigned according to hydrogeologic attributes. Finally, TOPSIS algorithm was applied to a shape file to place the order preference of candidate sites.

• Journal of radiological science and technology
• /
• v.23 no.1
• /
• pp.103-111
• /
• 2000

In recent years, medical procedures have become more complex, while financial pressures for shortened hospital stays and increased efficiency in patient care have increased. As a result, several shortcomings of present film-based systems for managing medical images have become apparent. Maintaining film space is labor intensive and consumes valuable space. Because only single copies of radiological examinations exist, they are prone to being lost or misplaced, thereby consuming additional valuable time and expense. In this paper, MINI-PACS for image archiving, transmission, and viewing offers a solution to these problems. Proposed MINI-PACS consists of mainly four parts such as Web Module, Client-Server Module, Internal Module, Acquisition Module. In addition, MINI-PACS system includes DICOM Converter that Non-DICOM file format converts standard file format. In Client-Server Module case, Proposed system is combined both SCU(Service Class User: Client) part and SCP(Service Class Provider: Server)part therefore this system provides the high resolution image processing techniques based on windows platform. Because general PACS system is too expensive for Medium and Small hospitals to install and operate the full-PACS. Also, we constructed Web Module for database connection through the WWW.

• Journal of Biomedical Engineering Research
• /
• v.19 no.3
• /
• pp.305-312
• /
• 1998

A small PACS based on PC is designed for CR. To receive the digital image from CR, a DICOM Interface Unit (DIU) is designed that complied with the medical image standard, DICOM V3.0. The CR images acquired through the DIU are stored in a file-server; the patient information of the images is stored in a database. To improve the performance of PC and to use it easily, multiresolution images are constructed by wavelet transform and displayed progressively. Wavelet compression method is newly adopted to store the images hierarchically to storage units. In this compression method, the image is decomposed into subclasses of image by wavelet transform, and then the subclasses of the image are vector quantized using a multiresolution codebook. The storage units for CR images were divided into the short-term storage in file-server and the harddisk in viewing station. Image processing tools supported by general PACS is implemented based on PC.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.5
• /
• pp.1744-1765
• /
• 2014

A client stores data in the cloud and uses remote data checking (RDC) schemes to check the integrity of the data. The client can detect the corruption of the data using RDC schemes. Recently, robust RDC schemes have integrated forward error-correcting codes (FECs) to ensure the integrity of data while enabling dynamic update operations. Thus, minor data corruption can be recovered by FECs, whereas major data corruption can be detected by spot-checking techniques. However, this requires high communication overhead for dynamic update, because a small update may require the client to download an entire file. The Variable Length Constraint Group (VLCG) scheme overcomes this disadvantage by downloading the RS-encoded parity data for update instead of the entire file. Despite this, it needs to download all the parity data for any minor update. In this paper, we propose an improved RDC scheme in which the communication overhead can be reduced by downloading only a part of the parity data for update while simultaneously ensuring the integrity of the data. Efficiency and security analysis show that the proposed scheme enhances efficiency without any security degradation.

• Journal of Environmental Impact Assessment
• /
• v.13 no.4
• /
• pp.153-164
• /
• 2004

An integration study of time-variable small watershed and stream models (USEPA's SWMM and WASP5) was performed for impact assessment of urbanization on water environment. The study area, the Kyoungan Stream, the tributary of Paldang Lake, was divided into 111 subbasins, based on the topographic condition, land use, and drainage system. RUNOFF block of SWMM was applied to estimate runoff flow and quality. EXTRAN block computed daily and hourly flow according to simulated runoff flow, water supply, and drainage data. SWMM was connected to WASP5 by transforming output file of SWMM into input file of WASP5. The nonpoint source loads and flow data of SWMM were imported to WASP5. The stream was divided into 45 segments based on the watershed delineation. The study included three water quality parameters, BOD, TN, and TP. The validate models were used to examine the impact of urbanization on stream flow and water quality.

• The KIPS Transactions:PartB
• /
• v.11B no.3
• /
• pp.257-266
• /
• 2004

This paper proposes caricature generation system that uses shading mechanism that extracts textural features of face. Using this method, we can get more realistic caricature. Since this system If vector-based, the generated character's face has no size limit and constraint. so it is available to transform the shape freely and to apply various facial expressions to 2D face. Moreover, owing to the vector file's advantage, It can be used in mobile environment as small file size This paper presents methods that generate vector-based face, create shade and synthesize the shade with the vector face.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.4
• /
• pp.9-17
• /
• 2009

In this paper, we propose a dynamic load distribution technique at the operating system level in mobile storage systems with a heterogeneous storage pair of a small form-factor and disk and a flash memory, which aims at saving energy consumption as well as enhancing I/O performance. Our proposed technique takes a combinatory approach of file placement and buffer cache management techniques to find how the load can be distributed in an energy and performance-aware way for a heterogeneous mobile storage air of a hard disk and a flash memory. We demonstrate that the proposed technique provides better experimental results with heterogeneous mobile storage devices compared with the existing techniques through extensive simulations.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.4107-4107
• /
• 2001

Previous works have shown the viability of NIRS technology for the prediction of fatty acids in Iberian pig fat, but although the resulting equations showed high precision, in the predictions of new samples important fluctuations were detected, greater with the time passed from calibration development to NIRS analysis. This fact makes the use of NIRS calibrations in routine analysis difficult. Moreover, this problem only appears in products like fat, that show spectrums with very defined absorption peaks at some wavelengths. This circumstance causes a high sensibility to small changes of the instrument, which are not perceived with the normal checks. To avoid these inconveniences, the software WinISI 1.04 has a mathematic algorithm that consist of create a “Repeatability File”. This file is used during calibration development to minimize the variation sources that can affect the NIRS predictions. The objective of the current work is the evaluation of the use of a repeatability file in quantitative NIRS analysis of Iberian pig fat. A total of 188 samples of Iberian pig fat, produced by COVAP, were used. NIR data were recorded using a FOSS NIRSystems 6500 I spectrophotometer equipped with a spinning module. Samples were analysed by folded transmission, using two sample cells of 0.1mm pathlength and gold surface. High accuracy calibration equations were obtained, without and with repeatability file, to determine the content of six fatty acids: miristic (SECV$\sub$without/=0.07% r$^2$$\sub$without/=0.76 and SECV$\sub$with/=0.08% r$^2$$\sub$with/=0.65), Palmitic (SECV$\sub$without/=0.28 r$^2$$\sub$without/=0.97 and SECV$\sub$with/=0.24% r$^2$$\sub$with/=0.98), palmitoleic (SECV$\sub$without/=0.08 r$^2$$\sub$without/=0.94 and SECV$\sub$with/=0.09% r$^2$$\sub$with/=0.92), Stearic (SECV$\sub$without/=0.27 r$^2$$\sub$without/=0.97 and SECV$\sub$with/=0.29% r$^2$$\sub$with/=0.96), oleic (SECV$\sub$without/=0.20 r$^2$$\sub$without/=0.99 and SECV$\sub$with/=0.20% r$^2$$\sub$with/=0.99) and linoleic (SECV$\sub$without/=0.16 r$^2$$\sub$without/=0.98 and SECV$\sub$with/=0.16% r$^2$$\sub$with/=0.98). The use of a repeatability file like a tool to reduce the variation sources that can disturbed the prediction accuracy was very effective. Although in calibration results the differences are negligible, the effect caused by the repeatability file is appreciated mainly when are predicted new samples that are not in the calibration set and whose spectrum were recorded a long time after the equation development. In this case, bias values corresponding to fatty acids predictions were lower when the repeatability file was used: miristic (bias$\sub$without/=-0.05 and bias$\sub$with/=-0.04), Palmitic (bias$\sub$without/=-0.42 and bias$\sub$with/=-0.11), Palmitoleic (bias$\sub$without/=-0.03 and bias$\sub$with/=0.03), Stearic (bias$\sub$without/=0.47 and bias$\sub$with/=0.28), oleic (bias$\sub$without/=0.14 and bias$\sub$with/=-0.04) and linoleic (bias$\sub$without/=0.25 and bias$\sub$with/=-0.20).

• Journal of Ocean Engineering and Technology
• /
• v.11 no.2
• /
• pp.145-153
• /
• 1997

This paper constructs a data base to create the Hull lines prior to piece manufacture and nesting steps with a personal computer using the data of created as the advanced software, TRIBON. The lines are plotted smoohtly, which are called the spline. The S/W is excellentlt estimated on the ptrcision among shipping exclusive S/W, which are currentlyused So, the S/W is mainly used as as shipping CAD program. High-cost H/W and high-performance S/W(TRIBON etc.) sre used with the bases of technique and capital power in the big shipbuilding yard; but small but small and medium-sized shipbuilding yard and related companycan't purchase dueto the high-cost product. To bring upthe small and medium sized shipbuilding yard lacking little competitive power, the data base S/W is joined with the CADRA of graphic S/W and is developed to create the Hull lines to be needed on as automatic cutting process usiing the personal computer.