• 한국터널지하공간학회 논문집
• /
• 제19권1호
• /
• pp.57-70
• /
• 2017

본 연구에서는 광산이나 오일샌드 등의 분야에서 적용되고 있는 슬러리 파이프 마모량 측정 방법과 슬러리 파이프의 마모량 예측에 관련된 이론식들을 문헌연구를 통해 살펴보고, 실제 싱가포르 슬러리 쉴드 TBM 현장에서 주기적으로 측정한 직선부 슬러리 파이프의 두께 측정 자료로부터 평균 일일 마모율과 굴착거리당 마모율을 산정하였다. Bukit Timah Granite의 풍화등급에 따른 마모율을 구하였는데, 풍화토에 가까운 G (V) 등급 지반 및 G (III)/G (V)의 복합지반에서의 마모율이 G(I)~G (IV)의 암반 등급지반에 비해서 1.5배 높게 나타났다. 슬러리 파이프 마모율은 슬러리 운송속도에 비례하여 증가하는 경향을 보였다. 향후 지반특성 별 파이프 마모율과 합리적인 관리두께 선정을 통하여 보다 최적화된 슬러리 파이프의 교체 및 회전 주기를 산정할 수 있을 것으로 판단된다.

• International Journal of Fluid Machinery and Systems
• /
• 제2권1호
• /
• pp.21-30
• /
• 2009

Slurry wear with sand particles in rivers is a serious problem for pump operation. Therefore, a technique to predict wear volume loss is required for selecting wear resistant materials and determining specifications for the maintenance period. This paper reports a method for predicting the wear depth distribution on the blade of an impeller. Slurry wear tests of an aluminum pump impeller were conducted. Prediction results of wear depth distribution approximately correspond with the results of slurry wear tests. This technique is useful for industrial application.

• 한국공작기계학회논문집
• /
• 제11권5호
• /
• pp.88-92
• /
• 2002

This research is about slurry wear of SM45C and SUS304, which using standard sand and KUM river sand. The results are as follows ; 1. Mass loss rates of both standard sand and KUM river sand were linearly increased as increasement of time and velocity. 2. The average diameter of sand from relatively, less wear rate and portion of larger particles. 3. Wear resistance was linear with time and velocity of liquid jet regardless of type of sand. Also, it was able to evaluate with the formula, $HV^2$/E calibrated with n, the velocity index. 4. The wear surface in liquid jet experiment was smooth. The maximum wear depth was observed at the location 2~4mm apart from the center in the condition of $90^{\circ}$ of collision angle 6mm of nozzle diameter, and 20mm of collision distance. The sectional shape in radial appeared as 'W'shape.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.798-801
• /
• 2001

This research is about slurry wear of SM45C and SUS304, which using standard sand and KUM river sand. The results are as follows ; 1. Mass loss rates of both standard sand and KUM river sand were linearly increased as increasement of time and velocity. 2. The average diameter of sand from relatively, less wear rate and portion of larger particles. 3. Wear resistance was linear with time and velocity of liquid jet regardless of type of sand. Also it was able to evaluate with the formula, HV2/E calibrated with n, the velocity index. 4. The wear surface in liquid jet experiment was smooth. The maximum wear depth was observed at the location, 2~4mm apart from the center in the condition of 90$^{\circ}$of collision angle 6mm of nozzle diameter, and 20mm of collision distance. The sectional shape in radial appeared as 'W' shape.

• Elastomers and Composites
• /
• 제46권1호
• /
• pp.70-77
• /
• 2011

슬러리와 접하는 환경에서 사용되는 고무 소재의 슬러리 마모 거동을 평가하기 위해 새로운 형태의 슬러리 마모시험기(Slurry Wear Tester; SWT)가 본 연구에서 제안되었다. 슬러리 마모 거동을 평가하기 위한 기본 매트릭스로 천연고무(NR)와 클로로프렌고무(CR)가 선정되었다. SWT 장치의 챔버를 채우기 위한 유체로는 35% HCl 용액과 NaCl 용액이 사용되었다. SWT의 결과는 기존의 고무 마모시험 방법들중의 하나인 건식 상태에서 시험이 진행되는 Akron 마모시험의 결과와 비교를 하였다. Akron 마모 시험의 결과에 따르면 CR이 NR 보다 더 빠른 속도로 마모가 됨을 알 수 있었으며 재료의 히스테레시스 특성이 마모에 영향을 미침을 알 수 있었다. 그러나 SWT 결과에 따르면 CR과 NR의 슬러리 마모거동은 큰 차이가 없었으며 더구나 산의 농도와 HCl 용액과 NaCl 용액에 침지된 시간에 따라서도 슬러리 마모속도에는 큰 영향이 없었다. 이는 슬러리에 포함된 유체가 마모지와 시편 사이의 마찰을 감소시켰기 때문이라고 사료되었다. 또한 Akron 마모 시험의 경우 고무 소재의 히스테레시스가 마모에 영향을 미쳤지만, SWT의 경우 유체는 반복 변형에 의해 발생되는 열을 감소시키고 마모지 표면에 남아있는 마모 찌꺼기들을 제거하였기 때문에 Akron 마모 시험의 결과와는 다른 결과를 나타내었다. 따라서 슬러리에 의한 고무 소재의 마모를 평가하는데 있어서 기존의 방식인 건식방법으로 마모 거동을 평가할 경우 잘못된 결과를 초래할 수 있음을 알 수 있었다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.141-142
• /
• 2002

In this paper, we propose a slurry jet (water containing $1\;{\mu}m$ alumina particles) impact test in order to quickly evaluate the wear properties of physical vapor deposited (PVD) coatings on commercial cutting tools. Linear wear was obtained for bothe coating and substrate material, and the penetration through the coating into the substrate was signified by a sharp increase in slope of the wear versus time curve. The PVD coatings deposited on the tools showed the same wear rates as those on reference plate specimens produced by the same coating methods. We conclude that our proposed evaluation technique for coatings is considerably useful as a screening test when evaluating coated tools like twist drills, taps, end mills, gear hobs, etc.

• 연구논문집
• /
• 통권31호
• /
• pp.53-63
• /
• 2001

Numerical investigation based on the control-volume using finite-difference method has been made by the development of computer program in order to figure out the pattern of the flow field inside screw decanter. The typical flow pattern inside screw decanter is characterized by the two strong recirculation zones separated by the main stream from slurry discharge hole to exit. These recirculation regions and flow pattern are strongly influenced by the centrifugal force and the change of the value of slurry viscosities, that is,500, 1,000 and 3,000cp respectively. The wear of screw decanter appeared experimentally in two spots; one is near the circumferential area of the slurry discharge hole and the other is on the decanter blades at a certain height from the bottom to a different degree after the continuous long-term operation. These wears are partly explained by the flow pattern and the strong turbulence intensity near the recirculation attachment region.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권4호
• /
• pp.263-271
• /
• 2016

Purpose: A slurry pump for flue gas desulfurization system performs a role that discharges the slurry of a plaster shape in a thermal power plant. Since a slurry pump transfers the slurry by the centrifugal force, it has the friction wear in the impeller and liner because of the slurry. Methods: In this study, failure analysis and test evaluation on the slurry pump have been proposed and the process that reliability of the product improves through design improvement has been presented. And failure cause of typical failure case has been investigated and improvement design has been presented. Results: Reliability improvement is established by analysis of the test results of before and after acceleration test. Conclusion: This study can be provided to improve the product reliability through failure analysis of a slurry pump.

• 한국자동차공학회논문집
• /
• 제18권6호
• /
• pp.84-90
• /
• 2010

This paper presents the shape optimization process for the automotive wheel bearing seal lip using the finite element method and the response surface method. First, to predict performance of the bearing seal lip, we used the non-linear finite element analysis. And then, we compared the analysis results with the test results to verify the finite element model. The objective function in optimizing process was obtained from results of the mud slurry test, which is one of many tests for evaluating performance of wheel bearing. After the mud slurry test for the four models which have the similar cross-sectional shape, we measured the wear area of the seal lip and the moisture content in grease. The objective function has been chosen by comparing the results of mud slurry test and characteristics of seal lip, such as contact force, contact area, contact pressure, and interference. Finally, within limited design parameters, we suggested the optimized shape of seal lip, which is expected to improve the wear and the sealing effect of it.

• 한국결정성장학회지
• /
• 제16권3호
• /
• pp.121-126
• /
• 2006

HVOF thermal spray coating of Co-alloy T800 is progressively replacing the classical hard coatings such as chrome plating because of the very toxic $Cr^{6+}$ ion known as carcinogen causing lung cancer. For the study of the possibility of replacing of chrome plating, the wear properties of HVOF Co-alloy T800 coatings are investigated using the reciprocating sliding tester both at room and at an elevated temperature of $1000^{\circ}F\;(538^{\circ}C)$. The possibility as durability improvement coating is studied for the application to the high speed spindles vulnerable to frictional heat and wear. Wear mechanisms at the reciprocating sliding wear test are studied for the application to the systems similar to the sliding test such as high speed spindles. Wear debris and frictional coefficients of T800 coatings both at room and at an elevated temperature of $1000^{\circ}F\;(538^{\circ}C)$ are drastically reduced compared to those of non-coated surface of parent substrate Inconel 718. This study shows that the coating is recommendable for the durability improvement coatings on the surfaces vulnerable to frictional heat. The sliding surfaces are weared by the mixed mechanisms such as oxidative wear, abrasion by the sliding ball slurry erosion by the mixture of solid particles and small drops of the melts and semi-melts of the attrited particles cavitation by the relative motions among the coating, sliding ball, the melts and semi-melts. and corrosive wear. The oxide particles and the melts and semi-melts play roles as solid and liquid lubricant reducing the wear and friction coefficient.