• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.81-91
• /
• 1999

Fuel characteristics of sewage sludge as required for the fluidized bed incinerators have been evaluated. Sewage sludge is basically a solid fuel with high percentage of moisture. Moisture content of the fuel directly affects the heating value of the fuel and the exhaust gas composition. When the sludge of transported into the incinerator, sludge cake is subject to the mixing, break-up and heat-up. Fluidization process would enhance these physical processes. The sludge fuel could then undergo the moisture evaporation and devolatilization process. Subsequent oxidation of volatiles as well as the remaining char would then follow. Sludge samples are characterized with high percentage of volatiles out of total combustibles. Quantitative understanding of above listed subprocesses would certainly help in the utilization of fluidized bed incinerators. A limited set of fuel characterization tests including calorimetric analysis, proximate analysis, elemental analysis and thermogravimetric analysis were conducted for the selected sludge samples. The measurement reasults of sludge samples were reported along with some published data. Limited experience in the actual incinerator plant is also presented.

• 상하수도학회지
• /
• 제20권1호
• /
• pp.147-155
• /
• 2006

For the further study of the solids flux theory, several researchers have proposed models to predict sludge settling velocity for each different concentration by using sludge indexes, SVI, SSVI and $SSVI_{3.5}$. It is difficult to apply the above models to predict sludge-water interface height in a batch column because sludge settling velocity changes while sludge settle down. While sludge settle down in a batch column, sludge concentration becomes high. The sludge concentration change is one of the most critical causes of the change of sludge settling velocity. Also, sludge concentration change causes of sludge index to change. SVI is more sensitive than SSVI or $SSVI_{3.5}$ to the change of sludge concentration. Each sludge has physical characteristics of its own which makes the settling velocity for each sludge different. The purpose of this study is to establish the correction factors that are able to compensate the errors derived from each different sludge settling characteristic by using sludge indexes, therefore the correction factors are applicable to the model for the change of sludge-water interface height.

• 유기물자원화
• /
• 제4권2호
• /
• pp.47-53
• /
• 1996

난지도 하수슬러지 매립지 내 슬러지의 적정 처리방안을 검토하기 위한 기초조사로서 슬러지의 매립량 및 성상을 조사하였다. 보링시험을 통하여 매립지의 깊이를 측정하였고 슬러지성상분석을 위한 시료를 채취하였다. 주요 분석내용은 슬러지의 화학적 특성, 중금속함량 그리고 용출시험이었다. 조사결과 슬러지 매립지는 평균 15m 깊이에 약 5만 평방미터 넓이로 총 매립량은 60만톤 정도로 추정되었다. 슬러지의 성상을 분석한 결과 일반적인 하수슬러지에 비하여 상당히 안정화된 슬러지임을 알 수 있었다. 또한 중금속 함량 시험에서 구리를 제외한 모든 항목에서 미국 캘리포니아주의 일반폐기물기준을 만족하였으며, 외국의 퇴비내 중금속허용기준치와 비교한 결과 대부분 기준치 이내이었다. 슬러지의 용출시험결과 난지도 하수슬러지매립장의 슬러지는 일반폐기물로 분류되었다.

• 한국환경보건학회지
• /
• 제34권1호
• /
• pp.76-85
• /
• 2008

Biological nutrient removal (BNR) sludge was added to a sequencing batch reactor (SBR) in the addition ratios of 0%, 20%, 40%, 50% while observing the variation of nutrient removal characteristics and microorganism groups. When the BNR sludge was added in a ratio over 40%, the characteristics of EBPR (enhanced biological phosphorus removal) was shown at the 27 days. However, a distinct BNR was not shown when the addition ratio of BNR sludge was lower than 40%. The organic removal efficiency were shown as 90% in all SBRs irrespective of the addition ratio of BNR sludge. At the 27 days, the phosphorus removal efficiencies were shown as 40%, 55%, 77% and 69%, respectively, according to the addition ratio of BNR sludge. Overall, efficient nitrification and phosphorus removal was shown when the added BNR sludge ratio was over 40%.

• 한국환경과학회지
• /
• 제30권3호
• /
• pp.245-255
• /
• 2021

In this study, we evaluated the effect of the type of sewage sludge (digested, non digested) on drying efficiency according to the polymer injection rate. The drying characteristics were shown using a near-infrared ray (NIR) and a microwave. As a result of the drying characteristics with NIR at a polymer dose ratio of 8%, the heating up period is up to 6 minutes after the start of the drying experiment. Afterwards, the constant rate drying period of the digested sludge (A, C and G sites) was 6 minute → 18 minute, showing a rapid decrease in moisture. On the other hand, non digested sludge (B, D, E, F, H, I, J and K sites) showed gradual drying characteristics compared to digested sludge until complete drying (10%). As the polymer dose ratio of 10% and 12%, the heating up period for digested sludge is up to 6 minute after the start of the experiment. Afterwards, the constant rate drying period of the digested sludge was 6 minute → 20 minute, showing a rapid decrease in moisture. On the other hand, the heating up period of non digested sludge was up to 10 minute after the start of the experiment, and the constant rate drying period was 10 minute → 22 minute, which was shorter than digested sludge. As a result of the drying characteristics with microwave at a polymer dose ratio of 8%, 10% and 12%, the constant rate drying period the digested sludge was 4 minute → 20~22 minute, showing a rapid decrease in moisture. On the other hand, non digested sludge of the constant rate drying period was 4 minute → 22~30 minute, which was longer than digested sludge.

• 한국환경과학회지
• /
• 제18권6호
• /
• pp.675-682
• /
• 2009

Sludge minimization from wastewater treatment plant is becoming more important to save disposal costs and to contribute to sustainable development. For the reduction of sludge production, solubilization and dewaterability of sludge are important factors in sludge processing. Ultrasonic treatment has been used to enhance sludge solubility and dewaterability with anaerobic digestion sludge, primary sludge, and activated sludge. At the ultrasonic power of 0.2 kW/L for 1 hour, anaerobic sludge and activated sludge showed higher solubilization efficiency than the primary sludge in terms of COD, proteins, and suspended solids. Ultrasonic treatment decreased sludge dewaterability and sludge settling characteristics up to 720 kJ/L of ultrasonic energy. In conclusion, ultrasonic treatment was effective for sludge solubilization but it deteriorate dewaterability (specific resistance) and settling characteristics (SVI) of sludge at the experimental conditions.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.611-616
• /
• 2001

Increased quantities of sewage sludge coupled with stringent regulations make it important to develope alternatives for residuals management. The use of PARAFIX as a solidifying agent for sewage sludge was investigated by several tests. Basic physicochemical characteristics, strength, permeability, and leaching characteristics were examined. PARAFIX was found to be very effective in reducing permeability, increasing strength, and immobilizing heavy metals. Based on the tests, it Is ascertained that PARAFIX enhances the solidification of sewage sludge. Also sewage sludge solidified with PARAFIX may be used effectively for construction materials.

• 한국환경과학회지
• /
• 제15권12호
• /
• pp.1177-1183
• /
• 2006

This study was carried out to evaluate effect of sludge characteristics (pH, SVI, anaerobic storage, wet density and growth phase) on the sedimentation of bulking sludge of paper manufacturing plant. The results showed that mix hulking sludge with sewage sludge (10-60%) caused the decrease of SVI, the settled sludge concentration was increased. Increase of anaerobic storage time (0 to 8 day) was increased SVI, sedimentation performance was deteriorated. The sedimentation was improved by addition of loess (0.2-5.0 g/L), because wet density of sludge was increased and SVI was decreased. At an exponential phase, the ratio of sedimented/growthed sludge concentration was decreased, the ratio was increased after stationary phase.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.165-172
• /
• 2004

Co-incineration of coal and wastewater sludge was r;erfonn:rl in a O.lMWth bench scale circulating fluidized bed combustor(CFBC) Sludge was received from a wastewater treatment plant in a dye industrial complex in Busan. Metropolis. Moisture content of received sludge was 80%. Coal and sludge mixture was prepared with weight ratio of 90/10, 85/15 and 80/20. Co-combustion characteristics of the coal and sludge mixture demonstrated stable combustion conditions. Component analysis, incineration characteristics, boiler performance was measured before and after the test and application for commercial 59MWth CFBC boiler. The release of hazardous components such as $SO_2$ and Cl was suppressed by the presence of inherent minerals of Ca, Na, K in coal and sludge mixture. Pre-drying was not essential but it was recommended for the benefits of manageability of sludge.

• 한국지반공학회논문집
• /
• 제29권2호
• /
• pp.57-64
• /
• 2013

본 논문에서는 정수슬러지의 고함수비 문제를 해결하고 재활용을 촉진하기 위해 정수슬러지와 화강풍화토를 다양한 배합비로 혼합하여 슬러지혼합토(sludge mixture)를 제작하고, 다양한 실내 시험을 통해 슬러지혼합토의 물리적 특성과 불포화 특성을 분석하였다. 시험 결과, 정수슬러지 함량이 증가함에 따라 동일한 모관흡수력에 대응하는 체적 함수비는 증가하였다. 또한 정수슬러지 함량 또는 세립분 함량이 증가함에 따라 공기함입치는 0.9kPa에서 2.4kPa로 증가하였다. 슬러지혼합토의 포화투수계수 값과 함수특성곡선의 결과를 활용하여 강우 시 침투해석을 수행하는데 있어서 중요한 인자인 불포화 투수함수를 산정하였다.