• Applied Chemistry for Engineering
• /
• v.27 no.1
• /
• pp.62-67
• /
• 2016

In this study, a pellet-type adsorbent was prepared by using the water-treatment sludge as a raw material, and its physical and chemical properties were analyzed through $N_2$-adsorption, XRD, XRF, and $NH_3$-TPD measurements. Adsorption performance for gaseous ammonia and formaldehyde was compared between the pellet-type adsorbents prepared from water-treatment sludge and the impregnated activated carbon. Although the surface area and pore volume of the pellet-type adsorbent produced from water-treatment sludge were much smaller than those of the impregnated activated carbon, the pellet-type adsorbent produced from water-treatment sludge could adsorb ammonia gas even more than that of using the impregnated activated carbon. The pellet-type adsorbent prepared from water-treatment sludge showed a superior adsorption capacity for ammonia which can be explained by chemical adsorption ascribed to the higher amount of acid sites on the pellet-type adsorbent prepared from water-treatment sludge. In the case of formaldehyde adsorption, the impregnated activated carbon was far superior to the adsorbent made from the water-treatment sludge, which can be attributed to the increased surface area of the impregnated activated carbon.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.3
• /
• pp.299-304
• /
• 2014

The need of reusing sewage sludge is highly increasing as the amount of domestic sewage sludge is growing and sewage management strategies were reinforced. Accordingly, in this research, we studied the composting possibility of sludge in sewage treatment plant J, using dryer facility with indirect system by conducting component analysis of dried sludge and experiment on cultivating crops. It was observed from the component analysis, that the dried sludge is appropriate for both decomposed manure standard of Ministry of Environment and fertilizer standard of Rural Development Administration. Besides, in the experiment on cultivating lettuce, the experimental group(soil + dried sludge) was superior to the control group(soil + bed soil) in apparent condition of leaves tensity and damage by disease and pest. In case of cultivating tomato, the experimental group showed stronger durability of fruits dangling on stems compared to the control group after 9 weeks. Consequently, the excess sludge dried by indirect heating system in the sewage treatment plant J is appropriate for the standard of both Ministry of Environment and Rural Development Administration and show good result in experiment on cultivating crops therefore it can be reused for composting.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.2
• /
• pp.102-111
• /
• 1998

Large amount of sludge have been generating in the process of water and wastewater treatment in urban area, and it has been making many environmental problems. Currently almost of sludge is landfilled, and since sludge is difficult to handle and dehydrate, the permeated water from the filled-in ground contaminate the surrounding soil and groundwater which may cause serious environmental and sociological problems. The organic component in sludge can be almost removed through the heat treatment process, and the final product is called artificial soil or artificial media according to the temperature control. To produce artificial media using sludge, chabazite and lime were used as an additive, and the mixture of sludge & additives was thermally treated in the firing kiln at about 800~1, 100。C for about fifteen minutes. The physical and chemical characteristics of the produced artificial media were analyzed, and it showed that it can be used as an artificial media for plant production or soil conditioner for farmland. The concentrations of the toxic heavy metals in the artificial media were lower than the soil quality standard for farmland. The characteristics of produced artificial media, using the mixture of sludge and additives through the heat treatment, is similar to the natural chabazite and soil. The analyzed result of the mineral composition of artificial media showed that it has a characteristics similar to natural stable soil, so the produced artificial media may be applied to farmland or water culture without causing adverse effect. Therefore this study showed that the above process can be a feasible alternative for sludge treatment.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.15 no.4
• /
• pp.138-146
• /
• 2007

There are still lots of areas where are covered with combined sewer pipes in Seoul. All buildings within those areas are equipping septic tanks which take part in separating solids from flushing water of chamber pots. Septic tanks legally demand emptying and cleaning the those inner bodies, resulting the generation of sludge which should be purified using the specified treatment plants, as one of environmental infrastructures. Scale of treatment plants for septic tank sludge are affected by sludge volume generated from cleaning, which give emphasis to adequate estimation of sludge volume in the future. This study aimed to define prediction tools for sludge volume. Among various parameters, floor area of building is most reasonable one to estimate the quantity of cleaning sludge, showing increasing gradually up to 13,149kL a day in 2020. Using same parameter also are able to assess the amount of BOD in the cleaning sludge.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.9 no.1
• /
• pp.89-94
• /
• 2003

As ship's fuel oil recently becomes viscous and the amount of sludge increases, many researches and studies are underway to process the sludge onboard the ship and to recycle it as a fuel for ship's boiler. Of many researches, especially ultrasonic emulsifier to break the particle of sludge into fine pieces is recognized as a most possible recycling device. In this regards, the author investigates the property change of sludge's temperature and pressure at the early stage of the study of ultrasonic emulsifier. This study can be used as a useful dora to determine the proper temperature and pressure to inject the processed sludge in the boiler injector and the results can also be comparable dora with the experimental data by ultrasonic emulsifier. In addition, the results will be a fundamental data to study the filtering efficiency of the sludge particle broken by temperature and pressure. It is expected that this study ultimately play a role to prevent marine oil pollution as the sludge is recycled onboard the ship and used as a fuel for boiler.

• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.317-323
• /
• 2014

People could not imagine living without tab water. However, the water filtering process at a purification plant used to produce tab water creates tons of sludge, which is generally wasted. This sludge waste consists of (1) mineral elements, such as sand, (2) organic materials, and (3) a coagulant, which agglomerates the two. As an enormous amount of sludge waste is generated every year, numerous studies have been carried out to identify how to deal with this problem. Currently, however, most of the sludge waste is directly discarded in landfills. In the present study, water-purified sludge waste received a heat treatment at $1300^{\circ}C$ and was then ground into particles to be used as a ceramic material. Next, the resultant particles were compounded with chamotte substitutes to produce grogged clay that is suitable for wheel-throwing ceramics. Consequently, the plasticity of the sludge waste decreased as the content of calcination increased. Thus, it is considered that wheel throwing is available only up to PBF-3. Thus, it is available for wheel throwing and has a high strength of 864 $kgf/cm^2$ with less than 0.2 percent of porosity and absorption ratio were displayed in PBF-2 at $1280^{\circ}C$ with 20 percent of calcination from the purified sludge. Therefore, the PBF-2 body produced in this study was considered to be capable of replacing grogged clay in the market.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.1
• /
• pp.123-130
• /
• 2007

The effects of hydrogen peroxide treatment on the reduction of waterworks sludge were investigated in this study. Sludge treated by peroxidation $H_2O_2$ oxidation) was dewatered using a pressure filter at 3atm. It was observed that $H_2O_2$ treatment at the acidic condition significantly reduce both cake water content and specific resistance to filtration (SRF), indicating the enhancement of dewaterability and filterability. The filterability by hydrogen peroxide treatment at pH 3.5 was better than acidic treatment and became comparable with polymer conditioning. The sludge filterability evaluated by SRF was optimal at a dose 2ml $H_2O_2$/sludge($0.02g\;H_2O_2/gTS$) after adjusting of pH to 3.5. The $H_2O_2$ oxidation at pH 3.5 also produced even more dewatered cake when compared with polymer conditioning. The reduction rate of sludge mass at an optimal condition showed 34% compared with untreated sludge. The effects of peroxidation on sludge properties including zeta potential, bound water and particle size were also evaluated. Peroxidation at the acidic condition reduced both bound water and zeta potential. By $H_2O_2$ combined with sulfuric acid leached iron caused Fenton's reaction, which showed a potential to significantly reduce the amount of solids mass and to produce more compact cake with higher filterability.

• Journal of Hydrogen and New Energy
• /
• v.27 no.2
• /
• pp.192-200
• /
• 2016

A characteristics of microwave drying-gasification was analyzed for converting a dewatered sewage sludge generated a wastewater treatment plant. Gas (60%) was the largest component of the product of microwave gasification, followed by sludge char (33%) and tar (2%). The main components of the producer gas were hydrogen (33%) and carbon monoxide (40%), and there was some methane and hydrocarbons ($C_2H_4$, $C_2H_6$, $C_3H_8$). Larger nitrogen and smaller oxygen amounts were generated. Gravimetric tar generated $414g/m^3$. This means a total tar which is a heavy hydrocarbons from the volatile organic substance in the sewage sludge. Selected light tars were benzene, anthracene, naphthalene, pyrene, showing lower concentrations as 2.62, 0.37, 0.49, $0.28g/m^3$, respectively. Sludge char has larger meso pores which is a mean pore size of $50.85{\AA}$ and has high adsorptivity. An amount of adsorption was $228.71cm^3/g$, showing higher quantity than acommercial adsorbers. This indicates that the gas obtained from the microwave gasification of wet sewage sludge can be used as fuel, but the heavy tar in the gas must be treated. Sludge char can be used as a tar reduction adsorbent in the process, and then burns as a solid fuel.

• Membrane Journal
• /
• v.11 no.4
• /
• pp.170-178
• /
• 2001

PVC microfiltration membrane was prepared by phase immersion method and applied to membrane bioreactor (MBR) contained activated sludge. The hydrophilicity of membrane and the pore size increase with the amount of additive(PVP) ducting the preparation of membrane. Permeation characteristics and the membrane fouling behavior were investigated by varying the internal environment in MBR using the prepared membranes. When there is a sludge bulking in MBR caused by microorganism, membrane fouling was accumulated. The cake layer resistance, R$_{c}$, of membrane increased in the order of CP-0 > CP-1.0 > CP-1.5. Rc increased up to 3.5~7 fold where the sludge bulking occurred in MBR. CP-1.5 seems to be appropriated membrane on the basis of the surface characteristics and the flux. The average flux of all the test membrane was 12(${\pm}$2) L/$m^2$hr whereas the COD removal efficiency was 98.8%. The ratio of bulking sludge and the type and the size of microorganism in operating MBR accelerate the membrane fouling and flux decline. It is concluded that the characteristic of membrane filtration depends on the hydrophilicity of membrane, the internal environment of MBR reactor and the growth factor of sludge.

• Applied Chemistry for Engineering
• /
• v.23 no.2
• /
• pp.228-231
• /
• 2012

In this work, the mixture of sewage sludge incubated in an anaerobic bioreactor for 35 days and paperboard sludge was treated in a batch anaerobic digester equipped with a ultrasonicator, and methane production during the treatment was investigated. The Soluble Chemical Oxygen Demand (SCOD) increased with increasing the amplitude of ultrasonicator, which help solubilizing paperboard sludge more effectively. The optimum amplitude of ultrasonicator for the enhancing methane productivity was found to be $142.5\;{\mu}m$ and the methane production amount increased as the anaerobic digestion period became longer. In addition, the anaerobic digestion was performed with various biomass (6000, 9000 and 12000 mg/L) and methane production increased with higher cell mass. These results will be used as valuable data to enhance the methane production from anaerobic digestion of the high concentration of organic wastes containing the paperboard sludge and sewage sludge.