• 한국의류산업학회지
• /
• 제7권3호
• /
• pp.309-314
• /
• 2005

This study was to determine whether the massage would enhance the physical relaxation in healthy women, and whether the effects of massage on the relaxation would be different by the applied regions of the body. Five healthy young women participated in the two test sessions of back and lower extremities massage in a chamber controlled at an air temperature of $28^{\circ}C$ and a relative humidity of $50{\pm}5%$. The slow stroke massage with lavender aroma oil for 30 minutes was applied to the subjects with a 10-min. and a 20-min rest time before and after the application, respectively. Rectal temperature decreased and the chest and thigh skin temperatures increased with the massage application, and the changes of the temperatures were greater with lower extremities massage than with back massage. Heart rate also decreased during massage period and tended to be lower with lower extremities massage. Systolic and diastolic blood pressure decreased with lower extremities massage. These results show that the slow stroke massage for 30 minutes can induce physiological responses related with the enhanced relaxation in healthy women, and lower extremities massage is more effective on the physical relaxation rather than back massage.

• Journal of Power Electronics
• /
• 제11권2호
• /
• pp.211-217
• /
• 2011

The dynamic response of a multi-MW wind turbine to a sudden change in wind speed is usually slow, because of the slow pitch control system. This could cause a large excursion of the rotor speed and an output power over the rated. A feedforward pitch control can be applied to minimize the fluctuations of these parameters. This paper introduces the complete design steps for a feedforward pitch controller, which consist of three stages, i.e. the aerodynamic torque estimation, the 3-dimensional lookup table for the wind seed estimation, and the calculation of the feedforward pitch amount. The effectiveness of the feedforward control is verified through numerical simulations of a multi-MW wind turbine.

• 대한조선학회논문집
• /
• 제40권1호
• /
• pp.20-27
• /
• 2003

The FPSO is moored by mooring lines to keep the position of it. The nonlinear motion analysis of the moored FPSO must be carried out in the initial design stage because sea environments affect motion of it. In this paper, the mathematical model is based on the slow motion maneuvering equations in the horizontal plane considering wave, current and wind forces. The direct integration method is employed to estimate wave loads. The current forces are calculated by using mathematical model of MMG. The turret mooring forces are quasi-statically evaluated by using the catenary equation. The coefficients of a model for wind forces are calculated from Isherwood's experimental data and the variation of wind speed is estimated by wind spectrum according to the guidelines of API-RP2A. The nonlinear motions of FPSO are simulated under external forces due to wave, current, wind including mooring forces in time domain.

• 한국통신학회논문지
• /
• 제11권5호
• /
• pp.307-314
• /
• 1986

수치해석법을 이용하여 환상 유전체를 포함하는 원형 도파관에서 유전체폭을 일정하게 변화시켰을 때의 Tmon 및 Teon 모드에 대한 전파상수를 구하였다. 이러한 구조는 유전체 공진기의 Q값을 개선하기 위한 supporter로 사용할 수 있고, 계산결과는 slow wave structure의 설계에 이용할 수 있다. 또한 본 논문에서의 수치해석 방법은 유전체 공진기의 공진주파수 계산에도 이용할 수 있다.

• Journal of electromagnetic engineering and science
• /
• 제7권2호
• /
• pp.74-82
• /
• 2007

The performances of M-ary DPSK(MDPSK) for diversity reception theoretically are derived, using an L-branch selection combining(SC) in frequency-nonselective slow Nakagami fading channels. For integer values of the Nakagami fading parameter m, An exact closed-form symbol error rate(SER) multichannel performance that can be easily evaluated via numerical integration is presented. Finally, we compare these analyses with numerical analyses with integral-form expressions for the performance of MDPSK signals under the effect of two-branch SC diversity over slow and nonselective Rician fading channels with additive white Gaussian noise(AWGN).

• ETRI Journal
• /
• 제29권5호
• /
• pp.614-618
• /
• 2007

A miniaturized bandstop filter (BSF) is introduced in this paper. The filter consists of one meander spurline and a pair of capacitively loaded stubs. The meander spurline with low resonant frequency and improved slow-wave factor exhibits excellent resonant bandgap characteristics which can be modeled by a longitudinally coupled resonator. The design of the proposed microstrip BSF is presented, and its performance is measured. Measurements show that there is a stopband from 2.3 to 5.6 GHz with $S_{21}$ less than -20 dB. The total length of this BSF equals 23 mm.

• Journal of the Optical Society of Korea
• /
• 제16권3호
• /
• pp.282-287
• /
• 2012

In this paper, we have proposed a principle to design a compact and temperature independent electro-optic switch based on a slotted photonic crystal directional coupler (SPCDC). Infiltration of the slotted silicon photonic crystal with polymer enhances the slow light and decreases the switching length, whereas the different signs of thermo-optic coefficients of the polymer and silicon make the proposed switch stable within $25^{\circ}C$ to $85^{\circ}C$ temperature range. The SPCDC structure is modified to increase poling efficiency of the polymer in the slot and to flatten the dispersion diagram of the even mode to minimize the switching length.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.50.6-50
• /
• 2001

This paper deals with a design of nonlinear glide slope capture logic using dynamic model inversion in singular perturbation, which is applicable to the autolanding in ILS. Aircraft dynamics are separated into the fast time-scale variables, related with the inner-loop design, and the slow time-scale variables, related with the outer-loop design. It is assumed that the aircraft starts landing at 1000ft of altitude, -2.5deg of flight path angle, and 250ft/sec of velocity. In the outer-loop design, commands of altitude and velocity are selected and thereby the pseudo-controls of power level and pitch rate are determined. Also the elevator input to the aircraft is determined in the inner-loop design. The final design is evaluated in 6 DOF simulation model of the associated aircraft, in which the actuator models are not included. The results show the satisfactory autolanding ...

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2008년도 춘계학술발표대회 논문집
• /
• pp.90-92
• /
• 2008

Environmental matters are one of key issues of today's world. At this point, advanced countries are proposing and planning various kinds of policies for sustainable communities. Space designers in those countries are more concerned with regeneration or slow development than development and innovation. As the new government of Korea was started in 2008, it announced 'design Korea project' as key agenda for national competitiveness. But it seems that they are focusing on development of new town than the concept of preservation or regeneration on which most advanced countries put their bases. In these regards, this research starts with the idea that environmental factor in space design is very important and it is directly connected with human survival. With this idea, the researching team created experimental space titled 'regeneration' as one of eco-friendly education program. The team aimed at building up or 'designing one man space-one to one ratio' in deserted place with recycled stuffs. With the idea of 'regeneration' in space, the researcher aims at awakening the sense of environment and putting it into practice in daily living.

• 국제초고층학회논문집
• /
• 제3권4호
• /
• pp.279-283
• /
• 2014

This paper introduces two platforms created by the development team at CORE studio, Thornton Tomasetti's global innovation studio. Collaborative platforms change the way that parties communicate and develop projects. Wikipedia is one of many great examples for a platform that supports collaborative development of a product - the world's largest encyclopedia. In the AEC industry, no such platform exists that can be used for collaborative development of a building project, and hence, information exchange between the parties involved, and modeling programs used in a project is slow and opaque. The platforms introduced in this paper allow for much greater transparency at all stages of the building design process, and hence improve the flow of information between parties involved in the process, both firm-internal and external. While traditionally, the use of a large number of different modeling and analysis platforms is hard to manage by a project team; this paper introduces methods that strengthen the design process by using a multitude of programs needed in the different building design phases.