• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.1
• /
• pp.35-41
• /
• 2002

It is extremely important to minimize network access time in constructing a high-performance PC cluster system For an SCI based PC cluster it is possilbe to reduce the network access time by maintaining network cache in each cluster node, This paper presents a CC-NUMA card that utilizes network cache for SCI based PC clustering The CC-NUMA card is directly plugged into the PCI solot of each node, and contains shared memory network cache, and interconnection modules. The network cache is maintained for the shared memory on the PCI bus of cluster nodes. The coherency mechanism between the network cache and the shared memory is based on the IEEE SCI standard. A CC-NUMA prototype card is developed to evaluate the performance of the system. According to the experiments. the cluster system with the CC-NUMA card showed considerable improvements compared with an SCI based clustser without network cache.

• The KIPS Transactions:PartC
• /
• v.14C no.7
• /
• pp.597-602
• /
• 2007

In conventional cooperative communication data rate is 1/2 than non cooperative protocols. In this paper, we propose a full data rate DF (Decode and Forward) cooperative transmission scheme. Proposed scheme is based on time division multiplexing (TDM) channel access. When DF protocol has full data rate, it can not obtain diversity gain under the pairwise error probability (PEP) view point. If it increases time slot to obtain diversity gain, then data rate is reduced. The proposed algorithm uses orthogonal frequency and constellation rotation to obtain both full data rate and diversity order 2. Moreover, performance is analyzed according to distance and optimized components that affect the system performance by using computer simulation. The simulation results revealed that the cooperation can save the network power up to 7dB over direct transmission and 5dB over multi-hop transmission at BER of $10^{-2}$. Besides, it can improve date rate of system compared with the conventional DF protocol.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.7
• /
• pp.273-281
• /
• 2003

This paper proposes a new time synchronization scheme for the Automatic Identification System(AIS). The proposed scheme utilizes a Temperature Compensated Crystal Oscillator(TCXO) as a local reference clock, and consists of a Digitally Controlled Oscillator(DCO), a divider, a phase comparator, and register blocks. Primary time reference is IPPS from GPS receiver that is synchronized to Universal Time Coordinated(UTC). And if GPS is unavailable, other station's signal is utilized as secondary time reference. The phase comparator measures time difference between the 1PPS and the generated transmit clock. The measured time difference is compensated by controlling the DCO and the transmit clock is synchronized to the Universal Time Coordinated(UTC). The synchronized transmit clock(9600Hz) is divided into the transmitting time slot(37.5Hz). The proposed scheme is tested in an experimental AIS transponder set. The experimental result shows that the proposed module satisfies the timing specification of the AIS technical standard, ITU-R M.1371-1.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.4
• /
• pp.69-76
• /
• 2005

In this paper, a 2 stage 6-pole bandpass filter(BPF) is designed and implemented by using triple-mode cavity for satellite payload system. The BPF has a 100MHz bandwidth at the center frequency of 14.5GHz(Ku-band) and the response of the filter is the Chebyshev function. The cavity filter uses two orthogonal $TM_{113}$ modes and one $TM_{012}$ mode. The coupling between the adjacent cavityes(intercavity coupling) results in a Chebyshev response and is accomplished by only H-filed component of If modes. The size and location of intercavity slot is determined by the coupling equation from E-and H-field of TE and TM resonant modes in circular cavity. The 2-stage 6-pole triple-mode cavity BPF has the insertion loss of 2.4dB and the reflection loss of 15dB in the passband. The triple-mode BPF proposed in this thesis can be used as channel filters for satellite payload system and can minimize filter assembly in general wireless communication system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2263-2268
• /
• 2015

This paper describes packet scheduling techniques that can be used to alleviate the impact of interference. The mechanism is consisted of interference estimation and master delay police. Proposed scheduling police is effective in reducing packet loss and delay. Another advantage worth mentioning, are the additional saving s in the transmitter power since packet are not transmitted when channel is bad. This paper gives that scheduling policy works only with data traffic since voice packets need to be sent at fixed intervals. However, if the delay variance is constant and the delay can be limited to a slot, it may be worthwhile to use DM packet for voice.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5A
• /
• pp.527-536
• /
• 2004

A novel hybrid multiple access system, TD-BCDMA, where Binary CDMA that maintains a constant amplitude by clipping the summation of input signals multiplied by the orthogonal codes is transmitted over a TDMA frame structure, was Nosed. In every time slot of TDMA, binary CDMA modulated multiple channel signals are transmitted with the same waveform of TDMA. TD-BCDMA has all the advantages of TDMA. Flexible adjustment of the data transmission rate In demand is possible by adjusting the number of codes and time slots assigned to each user. This property was used to show an example of Ad Hoc network applications. To obtain a proper synchronization scheme for TD-BCDMA, the Receiver Operating Characteristics performance and the false alarm probability and false dismissal probability under various channel environment of two different schemes, a preamble scheme as in TDMA and a synchronization channel scheme as in CDMA were compared. It was proved that the preamble scheme is more practical and suitable than the synchronization channel scheme for the hybrid multiple access system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5A
• /
• pp.431-439
• /
• 2010

In this paper, multiple-relay cooperative communication network with multiple antennas is considered. Applying the soft-decision-and-forward protocol to this system, pairwise error probability(PEP) is derived and then symbol error rate(SER) is also calculated. However, in general, signals are transmitted through the orthogonal channel in the multiple-relay cooperative communication network for the prevention of interference, which is inefficient in terms of the throughput. For the improvement of throughput, the relay selection is considered, where the relay having the maximum instantaneous end-to-end signal-to-noise ratio is chosen. Performance of the system is analyzed in terms of PEP and SER. As the number of the relay increases, relay selection method outperforms the conventional multiple-relay transmission system where all relays participate in the second time slot.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1233-1241
• /
• 2008

We design, fabricate, and measure a MIMO antenna system mountable on a small PCB (such as UMPC). The proposed antenna system accommodates three radiation elements on the PCB area of $40mm\;{\times}\;100mm$. Two of them employ a slot type and one uses a modified monopole with an inverted L shape expecting high isolation and polarization purity. The bandwidth of each proposed MIMO antenna ranges from 80MHz and 200MHz at the center frequency of 1.8 GHz. The isolations between ports have been found to be greater than 10dB over the interested frequency band. Besides, the proposed MIMO system has been evaluated in terms of ARC(Active Reflection Coefficient, TARC(Total ARC), correlation, MEG, and etc. The envelope correlation is calculated to be much less than 0.04 and the ratio of the mean effective gain(MEG) between the antennas is found to be close to unity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2C
• /
• pp.57-64
• /
• 2011

A two-way relay channel is a bidirectional cooperative communication channel between two nodes using a relay. In many cooperative communication schemes, a relay transmits its data to each node using separate channels. However, in the two-way relay channel, a relay can broadcast the network-coded signal to both nodes in a same time slot, which can increase the system throughput. In this paper, a new cooperative network error correcting scheme using distributed turbo code in a two-way relay channel is proposed. The proposed scheme not only increases the system throughput using network code but also improves the performance by utilizing the LLR information from relay node and other user node through distributed turbo code. Also, a power allocation scheme is investigated for various channel conditions to improve the system performance.

• Journal of the Korea Society for Simulation
• /
• v.19 no.4
• /
• pp.99-109
• /
• 2010

Existing research about automated wafer transport management strategy for semiconductor manufacturing equipment was mainly focused on dispatching rules which is optimized to specific system layout, process environment or transfer patterns. But these methods can cause problem as like requiring additional rules or changing whole transport management strategy when applied to new type of process or system. In addition, a lack of consideration for interconnectedness of the added rules can cause unexpected deadlock. In this study, in order to improve these problems, propose dynamic priority based transfer job decision making algorithm which is applicable with regardless of system lay out and transfer patterns. Also, extra rule handling part proposed to support special transfer requirement which is available without damage to generality for maintaining a consistent scheduling policies and minimize loss of stability due to expansion and lead to improve productivity at the same time. Simulation environment of Twin-slot type semiconductor equipment was built In order to measure performance and examine validity about proposed wafer scheduling algorithm.