• Journal of information and communication convergence engineering
• /
• v.5 no.1
• /
• pp.29-34
• /
• 2007

This paper proposes a MAC protocol for real-time VBR (rt-VBR) services in wireless ATM networks. The proposed protocol is characterized by a contention-based mechanism of the reservation request, a contention-free polling scheme for transferring the dynamic parameters, and a priority scheme of the slot allocation. The design objective of the proposed protocol is to guarantee the real-time constraint of rt-VBR traffic. The scheduling algorithm uses a priority scheme based on the maximum cell transfer delay parameter. The wireless terminal establishes an rt-VBR connection to the base station with a contention-based scheme. The base station scheduler allocates a dynamic parameter minislot to the wireless terminal for transferring the residual lifetime and the number of requesting slots as the dynamic parameters. Based on the received dynamic parameters, the scheduler allocates the uplink slots to the wireless terminal with the most stringent delay requirement. The simulation results show that the proposed protocol can guarantee the delay constraint of rt-VBR services along with its cell loss rate significantly reduced.

• Journal of Astronomy and Space Sciences
• /
• v.28 no.4
• /
• pp.345-354
• /
• 2011

Earth acquisition is to solve when earth can be visible from satellite after Sun acquisition during launch and early operation period or on-station satellite anomaly. In this paper, the algorithm and test result of the Communication, Ocean and Meteorological Satellite (COMS) Earth acquisition are presented in case of on-station satellite anomaly status. The algorithms for the calculation of Earth-pointing attitude control parameters including those attitude direction vector, rotation matrix, and maneuver time and duration are based on COMS configuration (Eurostar 3000 bus). The coordinate system uses the reference initial frame. The constraint calculating available time-slot to perform the earth acquisition considers eclipse, angular separation, solar local time, and infra-red earth sensor blinding conditions. The results of Electronics and Telecommunications Research Institute (ETRI) are compared with that of the Astrium software to validate the implemented ETRI software.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.390-397
• /
• 2008

Permanent Magnet Linear Synchronous Motor (PMLSM) has high efficiency, high energy density, and high control-ability. But, the detent force always is produced by the structure of slot-teeth. There are the disadvantages such as noise and vibration of the apparatuses are induced and the control ability is curtailed because detent force acts as thrust ripple. Therefore, the detent force reduction is an essential requirement in PMLSM. Generally, the method, skewing permanent magnet or slot-teeth, is used to reduce the detent force. But the thrust is decreased at the same time. If permanent magnet is skewed, the lateral force which operates as the perpendicular direction of skew direction is generated in linear guide of PMLSM. So, V-skew model is proposed for the reduction of lateral force. The lateral force acts as braking force in linear motion guide, and it has bad influence to the characteristics of PMLSM. However, these problems will not be solved by 2-dimensional Finite Element Analysis (FEA). So, in this paper 3-dimensional FEA is applied to analyze the PMLSM where permanent magnet is skewed and has overhang. The detent force and thrust characteristics considering skew and overhang effects of permanent magnet are analyzed by 3-dimensional FEA and the results are compared with experimental values to verify the propriety of analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.7A
• /
• pp.485-492
• /
• 2003

This paper proposes a transmission probability control scheme for guaranteeing fair packet transmissions in CDMA slotted ALOHA system. In CDMA slotted ALOHA system, the packets transmitted in the same slot act as multiple access interference, so that unsuccessful packet transmissions are caused entirely by multiple access interference. Therefore, in order to maximize the system throughput, the number of simultaneously transmitted packets should be kept at a proper level. In the proposed scheme, the base station calculates the packet transmission probability of mobile stations in the next slot according to the offered load and then broadcasts this probability to all the mobile stations. Mobile stations, which have a packet to transmit, attempt to transmit packet with the received probability. Simulation results show that the proposed scheme can offer better system throughput and average delay than the conventional scheme, and guarantee a good fairness among all mobile stations regardless of the offered load.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6A
• /
• pp.803-819
• /
• 1999

We introduces a wireless multimedia CDMA system configuring multiple transmission links between a user and radio ports. We propose a centralized reservation access control scheme with transmission scheduling and dynamic allocation (CRMA/TSDA) to support the diverse multimedia traffic in the introduced CDMA system. We propose two types of transmission allocation algorithms: slot and link allocation algorithms with local information and global information. The transmission allocation algorithm proposed in this paper allocates a set of ports configuring multiple radio links and transmission slot/power to each of scheduled transmission requests. We perform simulations for the proposed system and algorithms. Through the simulation, we show that the performance of the algorithm with local information stands comparison with that of the quasi-optimum algorithm with global information. Also, the two algorithms in the system has shown to have better performance than the conventional CDMA system with a distributed random transmission method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9B
• /
• pp.589-597
• /
• 2007

In this paper, a WDM metro ring consisting of access nodes with $FT-FR^n$ (Fixed Transmitter - n Fixed Receivers) is considered. A trade-off exists between node throughput and transmission fairness because the access nodes share wavelength channels. In order to eliminate the transmission unfairness and to increase throughput, the p-persistent medium access control (MAC) protocol is proposed: each node uses an empty optical slot to transmit a packet and make it available with the extraction of a transferred packet at the source access node, called source-stripping. The local empty slot can be used to transfer a head-of-line packet in the local buffer with probability p or it is used for the next downstream nodes with 1-p. The proposed MAC protocol provides better node throughput than the non-persistent protocol and exhibits better fairness index than the 1-persistent protocol in WDM ring networks. In addition, numerical analysis shows that the proposed MAC protocol maximizes the node throughput under uniform traffic conditions. For more detailed results, we use the network simulation under Poisson and self-similar traffic. Furthermore, unpredictable traffic constructed by the combination of the former and the latter is also considered. The reasonable probability of the p-persistent protocol for a given architecture can be determined through simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3B
• /
• pp.191-199
• /
• 2003

In this paper, a channel access control algorithm and a dynamic slot allocation algorithm are proposed for rt_VBR services and ABR services in the wireless ATM networks. In the proposed algorithm, rt_VBR terminals that require real-time services transmit a reservation request packet by a RAS minislot. An rt_VBR terminal, which transmitted the reservation request packet, transmits the dynamic parameters by DPS minislot without contention. On the other hand, ABR terminals that have a non-real-time traffic burst transfer a reservation request packet with contention basis. Based on the received dynamic parameters, the base station scheduler allocates uplink data slots as well as DPS minislot into rt_VBR terminals.

• Journal of information and communication convergence engineering
• /
• v.5 no.2
• /
• pp.93-97
• /
• 2007

In this paper, centralized access control and slot allocation algorithm is proposed for wireless networks. The proposed algorithm is characterized by the contention-based reservation. In order to reduce the collision probability of reservation request, the base station calculates and broadcasts the transmission probability of reservation requests, and the wireless terminal transmits its reservation request with the received transmission probability. The scheduler allocates the uplink data slots based on the successful reservation requests. Simulation results show that the proposed algorithms can provide high channel utilization, and furthermore, maintains constant delay performance in the heavy traffic environment.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.199-201
• /
• 2005

USB has arguably become the most successful PC peripheral interconnect ever defined. As appearing UWB, wireless USB (WUSB) emerges very popular technology. However, the distributed Medium Access Control (MAC) does not harmonize with the topology of WUSB. In this paper, we address a novel MAC protocol for conformity with WUSB. The protocol is to handle negotiation on Distributed Reservation Protocol (DRP) including the channel time slot of WUSB.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.323-327
• /
• 1995

A new air knife system for coating thickness control in hot dip galvanizing process had been developed and installed on the CGL in Pohang Steel Works, POSCO. This new system consists of air knives with remotely adjustable nozzle slot and an automatic control system which can control both longitudinal and traverse coating deviations. Based on the optimal control algorithm, a traverse coating deviation control was designed. The controller controls the lip profile of the air knives with flexible structure according to the deviation of coating weight. From the measured values which are dependent on the strip width, the lip gaps are calculated with optimal algorithm and the model of the coating deviation. Time delay between knives and a coating thickness gauge is solved by the Smith Predictor.