• 대한화학회지
• /
• 제31권5호
• /
• pp.444-451
• /
• 1987

에틸렌디아민, 프로필렌디아민 및 디에틸렌트리아민의 구리(II), 카드뮴(II) 및 아연(II)착이온의 桓元에 대하여 압력에 따른 폴라로그래피적 파라미터의 依存性을 조사하였다. 水銀滴下電極, 고인수은전극 및 나선형 백금선을 각각 作業電極, 基準電極 및 補助電極으로 사용하였다. 압력이 1기압에서 1,500기압으로 증가함에 따라 금속착이온의 還元半波電位는 陰電位 쪽으로 이동하였으며, 擴散電流는 상당히 커졌다. 이러한 현상은 전해질용액의 물리적 성질 곧 密度, 粘性度, 誘電常數, 電氣傳導度 등이 압력이 증가함에 따라 커지기 때문이다. 압력을 증가시키면 log plot의 기울기 값이 커지므로 환원반응의 可逆性은 나빠지고 있다. 25$^{\circ}$C ~ 35$^{\circ}$C의 온도범위에서 측정한 확산전류의 溫度係數가 압력을 증가시켜도 2%정도이므로 高壓下에서 폴라로그래피적 환원반응은 擴散支配的이다. 또 실험압력 범위내에서 금속착이온의 확산전류와 농도 사이에는 線形關係가 성립하였다.

• 수산해양기술연구
• /
• 제53권1호
• /
• pp.60-66
• /
• 2017

This study researched the population of ecological characteristics of the goldeyes rockfish Sebasetes thompsoni sampled by gill net in the Ulleungdo area from February 2013 to February 2014 in order to assess the current stock status and provide scientific advice for management implementation. The instantaneous coefficient of total mortality (Z) was 0.78/year and the survival rate (S) was 0.459. The instantaneous coefficient of natural mortality (M) was 0.461/year. Based on the estimates of Z and M, the instantaneous coefficient of fishing mortality (F) was 0.318/year. The age at first capture ($t_c$) was 4.41/years. Current Yield-per-recruit (YPR) was 30.83 g, and fishing mortality at maximum YPR ($F_{max}$) and fishing mortality corresponding to 10% of the maximum slope in YPR curve ($F_{0.1}$) were 3.257/year and 0.673/year, respectively. $F_{35%}$ and $F_{40%}$, indicating fishing mortalities at 35% and 40% of maximum Spawning biomass-per-recruit (SBPR), were 0.619/year and 0.509/year, respectively. Based on the biological reference points, fishing mortality at overfished threshold yield ($F_{OTY}$) was calculated as 0.509/year. Current $SBPR/SBPR_{MSY}$ was 1.313 above 1.0, which means 'not overfishe,' while current $F/F_{OTY}$ was 0.629 below 1.0, which indicates 'not overfishing.' In conclusion, the current status of goldeyes rockfish was located in green zone (i.e., not overfished and not overfishing) according to the revised Kobe plot.

• 대한물리의학회지
• /
• 제9권2호
• /
• pp.161-170
• /
• 2014

PURPOSE: This study concerns the wheelchair-based rehabilitation of elderly people, investigating muscle activity and coordination of upper limbs during wheelchair-based new millennium health gymnastics with varying elbow exercise velocity. METHODS: Twelve elderly people participated in new millennium gymnastics twice per week during 12-weeks. The group was separated into 0.4, 1.0, and 1.6 Hz groups (controlled by the metronome speed). Range of motion was measured by electrogoniometer, electromyography signals used root mean square values. The data application was normalized using reference voluntary contraction (%RVC). Upper limb (wrist and elbow joint) data gathered while standing up after the "falling on hips" was investigated in terms of coordination of angle-angle plots. One-way ANOVA, paired t-test and Scheffe's post hoc comparisons, were used for statistical analyses. RESULTS: There were results taken before and after the experiments. The results demonstrated a significant improvement in the triceps brachii and flexor carpi radialis of the 0.4 Hz group (p<.05). There was significant difference in the triceps brachi of the 1 Hz group. No significant differences were found in all muscles of the 1.6 Hz group. Muscle co-activation indexes of the 0.4 Hz group were larger than the others. The 0.4 Hz graph was turning point synchronized clockwise. The 1 Hz graph was out of phase with the negative slope. The 1.6 Hz graph was turning point synchronized counterclockwise, and uncontrolled factor phase was offset on angle-angle plots. CONCLUSION: It is found that improvement of muscle activity and upper limbs coordination of elderly people using wheelchair-based new millennium gymnastics is optimal with elbow exercise velocity with a frequency of 0.4 Hz.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1848-1853
• /
• 2016

Control Rod Position Indicator in nuclear reactor vessel has developed for small reactor in Korea. Because of severe environment in reactor vessel, target of this study is to develop the suitable position indicator. In this study, solenoid type position indicator made of Mineral Insulated Cable(MI Cable) was introduced to adapt in severe environment. And inductance of the solenoid was used to indicate the rod position for high precision. But problem of this concept is that a linear slope of inductance is changed by temperature effect. To resolve this problem, two sensing coils were introduced for temperature compensation. A role of the sensing coil is to make reference linear equation about certain temperature. To confirm this concept, also, inductance of solenoid and sensing coils were measured at room and high temperature (${\sim}300^{\circ}C$). The results of measurement show that the position error of sensing coil between room and high temperature was about 2%. But it was identified that this error was resulted from insufficient test environment (temperature error between solenoid and sensing coils was about 2% at high temperature condition). Therefore, solenoid type position indicator shows that it is very suitable in reactor vessel as a high precision rod position indicator.

• 한국컴퓨터정보학회논문지
• /
• 제29권1호
• /
• pp.77-84
• /
• 2024

본 논문에서는 컴퓨터 비전을 사용하여 6가지 측정값(눌린 단자의 길이, 단자 끝의 치수(폭), 눌린부분(와이어 부분, 코어 부분)의 폭)을 계산하여 와이어 하네스의 결함을 정확하고 빠르게 탐지할 것을 제안한다. 두 가지 유형의 데이터에서 Harris 코너 검출을 활용하여 물체의 위치를 탐지하고 측정 영역별 특징과 배경과 물체 사이의 음영 차이를 활용하여 각 샘플의 기울기를 반영하는 측정값을 추출하기 위한 기준점을 생성한다. 이후 유클리드 거리 방법과 보정 계수를 사용하여 예측값을 계산하는 방법을 통해 와이어의 위치 변화에 관계 없이 측정값을 예측할 수 있다. 각 측정 유형별로 99.1%, 98.7%, 92.6%, 92.5%, 99.9%, 99.7% 정확도를 달성하였으며, 모든 측정값에서 평균 97%의 정확도로 우수한 결과를 얻었다. 해당 검사 방법은 기존 검사 방법인 육안 검사의 문제점을 보완하고, 작은 양의 데이터만을 이용하여 우수한 결과를 도출 가능하다. 또한 이미지 처리만 이용하기 때문에 딥러닝 방법보다 더 적은 데이터와 비용으로 적용 가능할 것으로 기대된다.

• 한국의류산업학회지
• /
• 제19권4호
• /
• pp.385-399
• /
• 2017

This study will broaden the application of doll costume product with historical characteristics and the image of unlined cheollik in the $17^{th}$ century period of transition during the Joseon Dynasty. Historical design sources were extracted from old documents and precedent studies. Unlined cheollik of Shin Gyeong-yu, meritorious retainer, were selected as main reference-relic because of various fabric, preserved conditions and definite shape. 'Baby doll' was selected as main model because of consumer preferences and awareness. Design sources from unlined cheollik in the early $17^{th}$ century were about a 1:2 ratio of upper and under parts, removable separated doori-somae, knife-shaped collar (outside), projected square collar (inside), long pleats line, side slit, traditional flat fell seam sewing. Trapezoidal side line, round waistline, and thin fabric were applied in designs because of toddler-body of doll model. Three designs were produced in step 1: Cheollik A focusing on the historical remake (traditional type), Cheollik B with belt and side slit (crossover type), and Cheollik C with back- opening (modern type). In step 2, interview with fashion major student was conducted to increase the utility of designs. As a result, modern trend sources (frill, velcro, round armhole line, slope of sleeves, and floral pattern) were reflected in Cheollik B, C. Finally, three doll cheollik and cheollik-styled doll apron sample were produced. Various versions must be suggested in the study of doll costume products with traditional sources that balance historical characteristics and practicality to improve customer satisfaction.

• 한국측량학회지
• /
• 제35권2호
• /
• pp.113-122
• /
• 2017

Natural disasters caused by climate change are increasing globally. There are few studies on the quantitative analysis methods for predicting damages in the island area due to sea level rise. Therefore, it is necessary to study the damage prediction analysis method using the GIS which can quantitatively analyze. In this paper, we analyze the cause and status of sea level rise, quantify the vulnerability index, establish an integrated terrestrial modeling method of the ocean and land, and establish a method of analyzing the damage area and damage scale due to sea level rise using GIS and the method of making the damage prediction figure was studied. In order to extract the other affected areas to sea level rise are apart of the terrain model is generated by one requires a terrain modeling of target areas are offshore and vertical reference system differences in land, found the need for correction by a tidal observations and geoid model there was. Grading of terrain, coastline erosion rate, coastal slope, sea level rise rate, and even average by vulnerable factors due to sea level rise indicates that quantitative damage prediction is possible due to sea level rise in the island area. In the case of vulnerable areas extracted by GIS, residential areas and living areas are concentrated on the coastal area due to the nature of the book area, and field survey shows that coastal changes and erosion are caused by sea level rise or tsunami.

• Advances in environmental research
• /
• 제2권2호
• /
• pp.81-98
• /
• 2013

Mercury (Hg) dynamics in the boreal environment have been a subject of concern in recent decades, due to the exposure of local populations to the contaminant. Land use, because of its impact on mercury inputs, has been highlighted as a key player in the sources and eventual concentrations of the heavy metal. In order to evaluate the impact of watershed disturbances on Hg dynamics in frequently fished, large boreal lakes, we studied sediment cores retrieved at the focal point of eight large lakes of Qu$\acute{e}$bec (Canada), six with watersheds affected by land uses such as logging and/or mining, and two with pristine watersheds, considered as reference lakes. Using a Geographical Information System (GIS), we correlated the recent evolution of land uses (e.g., logging and mining activities) and morphological characteristics of the watershed (e.g., mean slope of the drainage area, vegetation cover) to total Hg concentrations (THg) in sedimentary records. In each core, THg gradually increased over recent years with maximum values between 70 and 370 ng/g, the lowest mercury concentrations corresponding to the pristine lake cores. The Hg Anthropogenic Sedimentary Enrichment Factor (ASEF) values range from 2 to 15. Surprisingly, we noticed that the presence of intense land uses in the watershed does not necessarily correspond to noticeable increases of THg in lake sediments, beyond the normal increment that can be attributed to Hg atmospheric deposition since the beginning of the industrial era. Rather, the terrestrial Hg inputs of boreal lakes appear to be influenced by watershed characteristics such as mean slopes and vegetation cover.

• 정보처리학회논문지B
• /
• 제10B권4호
• /
• pp.465-472
• /
• 2003

얼굴영상을 효율적으로 처리하기 위해선 먼저 인력영상에서 얼굴영역과 얼굴을 구성하는 각 요소를 검출하고 얼굴의 회전각을 추정하는 전처리과정이 필요하다. 본 논문에서는 다양한 얼굴의 크기와 머리회전, 조명의 변화가 허용되고 피부색과 비슷한 배경이 얼굴에 병합되는 경우에도 얼굴과 요소들(눈, 입)을 강건하게 검출할 수 있는 방법을 제안한다. 변환된 HSV 컬러 좌표계상의 대역적 피부 색상정보와 히스토그램을 이용한 피부 색상정보로 얼굴후보영역을 지정한 뒤, 같은 방법으로 얼굴후보영역 안에서 입술영역을 검출한다. 입술영역의 횡축 기울기로 x축에 대한 회전각을 추정한 후, 얼굴의 모양정보와 요소의 위치정보를 이용해 얼굴임을 확정한다. 다음으로 양안의 조합으로 이루어진 부분 템플릿매칭을 통해 눈을 검출한 뒤, 얼굴의 넓이를 참조한 3차원 공간상에서의 눈의 위치를 계산하여 y축 회전각을 추정한다. 다양한 얼굴영상에 대해 실험을 실시한 결과, 본 알고리즘의 유효성을 확인하였다.

• Journal of Biosystems Engineering
• /
• 제38권4호
• /
• pp.255-263
• /
• 2013

Purpose: It is not easy to drive a rice-transplanter avoiding underlapped or overlapped transplanting in paddy fields. An automated guidance system for the riding-type rice-transplanter would be necessary to operate the rice-transplanter autonomously or to assist the beginning drivers as a driving aid. Methods: A prototype of guidance system was composed of embedded computers, RTK-GPS, and a power-steering mechanism. Two Kalman filters were adopted to overcome sparse positioning data (1 Hz) from the RTK-GPS. A global Kalman filter estimated the posture of rice-transplanter every one second, and a local Kalman filter calculated the posture from every new estimation of the global Kalman filter with an interval of 200 ms. A PID controller was applied to the row-following mode control. A control method of U-turning mode was developed as well. A stepping motor with a reduction gear set was used to rotate the shaft of steering wheel. Results: Test trials for U-turning and row-following modes were done in a paddy field after some parameters have been tuned at the ground speed range of 0.3 ~ 1.2 m/s. The minimum RMS error of offset was 3.13 cm at the ground speed of 0.3 m/s while the maximum RMS error was 13.01 cm at 1.2 m/s. The offset RMS error tended to increase as the ground speed increased. The target point distance, LT also affected the system performance and PID controller parameters should be adjusted on different ground speeds. Conclusions: A target angle-based PID controller plus stationary steering angle controller made it possible for the rice-transplanter to steer autonomously by following a reference line accurately and even on U-turning mode. However, as condition in paddy fields is very complicated, the system should control the ground speed that prevents it from deviating too much due to ditch and slope.