• 한국공간구조학회논문집
• /
• 제21권3호
• /
• pp.25-34
• /
• 2021

This study develops a new device system for measuring a slope of object with non-adhesive, non-contact and non-face-to-face, namely Inclinometer Slope Laser Measuring (ISLM), that is applicable in the field. This system includes cradle, laser, camera, and computer and the filming and is performed after laser projection at programmed intervals. After measuring the amount of displacement converted to numerical values, these values can then be transferred to the office using the selected data transmission method. The obtained results from the test carried out to verify the reliability of the ISLM system indicated that the ISLM system can measure with accurately level of 0.1mm/Pixel at 1m distance and when increasing the camera resolution, the precision might increase proportionally. Therefore, the proposed measure system may widely apply on-site for various constructions, especially, in the case of object with very high surface temperature where exhibits difficulty to directly measure the adjacent structures. However, due to the sensitive reaction to the illuminance, this method can be applied with caution at times of large changes in illuminance, such as at dawn and at dusk.

• 한국지반공학회논문집
• /
• 제21권4호
• /
• pp.115-122
• /
• 2005

본 연구에서는 토사사면의 안전율을 산정하고 최소임계단면을 탐색하기 위하여 개별요소법과 유전자 알고리즘으로 조합된 새로운 해석방법이 제안되었다. 안전율 산정시, 한계평형법에 근거한 통상적인 사면안정 해석법들은 전체적인 힘평형을 만족하지 못하기 때문에 절편간에 작용하는 힘의 경사와 위치에 대한 가정이 불가피하다. 개별요소법에 근거하여 개발된 사면안정해석법은 힘과 변위간의 적합조건을 만족할 수 있다. 또한 제안된 해석기법에서는 최소임계 단면을 탐색하기 위하여 실수형 유전자 알고리즘이 적용되었다. 이 방법은 지역해에 쉽게 수렴하는 간편한 최적화기 법보다 안정적으로 전역해를 탐색할 수 있다 제안된 해석기법의 적용성을 검토하기 위하여 예제해석이 수행되었다.

• 지질공학
• /
• 제16권3호
• /
• pp.275-282
• /
• 2006

본 연구는 모형실험장치를 이용하여 인공강우에 의한 산사태 발생특성과 사태물질의 확산거동특성을 파악하기 위하여 수행되었다. 본 연구에서는 강우강도와 사면경사의 변화에 따른 다양한 실험조건하에서 일정 시간 간격으로 간극수압, 사면붕괴양상 및 변위, 그리고 토사의 확산면적 등을 각각 측정하였다. 실험 중 복수의 비디오 카메라와 디지털 스틸카메라로 촬영한 후, 이미지 분석을 실시하여 시간대별 산사태 발생양상 및 사태물질 확산특성 자료를 취득하였다. 실험결과에 따르면, 간극수압은 강우강도 및 사면경사에 비례하여 변화하며 이에 따라 강우강도 및 사면경사가 커짐에 따라 산사태가 발생할 가능성도 증가하였다. 사태물질의 확산면적은 강우강도, 강우지속시간, 그리고 사면경사의 증가에 비례하는 양상을 가짐을 확인하였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.262-267
• /
• 2008

Recently, landslides frequently occur on natural slope and/or man-made cut slope during periods of intense rainfall. With a rapidly increasing population on or near steep terrain, landslides have become one of the most significant natural hazards. Thus, it is necessary to protect people from landslides and to minimize the damage of houses, roads and other facilities. To accomplish this goal, many landslide monitoring systems have been developed throughout the world. In this paper, a simple landslide detection system that enables people to escape the endangered area is introduced. The system is focused on the debris flows which happen frequently during periods of intense rainfall. The system is based on the wireless sensor network (WSN) that is composed of wireless sensor nodes, gateway, and remote server system. Wireless sensor nodes and gateway are deployed by commercially available Microstrain G-Link products. Five wireless sensor nodes and one gateway are installed at the test slope for detecting ground movement. The acceleration and inclination data of test slope can be obtained, which provides a potential to detect landslide. In addition, thresholds to determine whether the test slope is stable or not are suggested by a series of numerical simulations, using geotechnical analysis software package. It is obtained that the alarm should be issued if the x-direction displacement of sensor node is greater than 20mili-meters and the inclination of sensor node is greater than 3 degrees. It is expected that the landslide detection method using wireless senor network can provide early warning where landslides are prone to occur.

• Geomechanics and Engineering
• /
• 제18권3호
• /
• pp.315-328
• /
• 2019

This paper presents an investigation on bearing capacity, load-settlement behavior and safety factor of rock-soil slopes reinforced using geogrid-box method (GBM). To this end, small-scale laboratory studies were carried out to study the load-settlement response of a circular footing resting on unreinforced and reinforced rock-soil slopes. Several parameters including unit weight of rock-soil materials (loose- and dense-packing modes), slope height, location of footing relative to the slope crest, and geogrid tensile strength were studied. A series of finite element analysis were conducted using ABAQUS software to predict the bearing capacity behavior of slopes. Limit equilibrium and finite element analysis were also performed using commercially available software SLIDE and ABAQUS, respectively to calculate the safety factor. It was found that stabilization of rock-soil slopes using GBM significantly improves the bearing capacity and settlement behavior of slopes. It was established that, the displacement contours in the dense-packing mode distribute in a broader and deeper area as compared with the loose-packing mode, which results in higher ultimate bearing load. Moreover, it was found that in the loose-packing mode an increase in the vertical pressure load is accompanied with an increase in the soil settlement, while in the dense-packing mode the load-settlement curves show a pronounced peak. Comparison of bearing capacity ratios for the dense- and loose-packing modes demonstrated that the maximum benefit of GBM is achieved for rock-soil slopes in loose-packing mode. It was also found that by increasing the slope height, both the initial stiffness and the bearing load decreases. The results indicated a significant increase in the ultimate bearing load as the distance of the footing to the slope crest increases. For all the cases, a good agreement between the laboratory and numerical results was observed.

• 한국지반환경공학회 논문집
• /
• 제10권7호
• /
• pp.151-158
• /
• 2009

1990년대 초 쏘일네일링 공법이 국내에 처음 도입된 이후 쏘일네일링 공법은 사면안정 및 지반굴착의 보강공법으로 널리쓰이고 있으며, 쏘일네일링 공법의 적용이 확대됨에 따라 초기의 쏘일네일링 공법에 대한 여러 가지 개선된 쏘일네일링 공법도 발달하였다. 최근에 많이 쓰이는 쏘일네일 공법들은 크게 그라우트에 대한 개선 공법과 쏘일네일 자체에 대한 개선 공법으로 분류된다. 그라우트에 대한 개선공법으로는 대표적으로 가압그라우팅 공법을 들 수 있으며, 쏘일네일 자체에 대한 개선공법으로는 자천공 쏘일네일 공법, 제거식 쏘일네일 공법 등과 더불어 본 연구의 대상이 되는 수평배수공을 겸한 상향식 쏘일네일링 공법이 있다. 본 논문에서는 수평배수공을 겸한 상향식 쏘일네일 공법에 대한 연구로 일반적인 쏘일네일 공법과의 비교 연구를 수행하였다. 연구순서로는 먼저 사면안정에 대하여 한계평형 해석을 이용한 안전율 비교를 하였고, 다음으로 연직 굴착에 대하여 연속체 해석을 통한 변위에 대한 비교를 하였다. 연구결과 쏘일네일을 상향으로 설치할 경우 한계평형 해석에서의 안전율은 상당량이 감소하였고, 수평변위에 대한 연구결과에서는 큰 차이가 없었다.

• Structural Engineering and Mechanics
• /
• 제13권6호
• /
• pp.695-711
• /
• 2002

Here, the dynamic response characteristics of thick cross-ply laminated composite cylindrical shells are studied using a higher-order displacement model. The formulation accounts for the nonlinear variation of the in-plane and transverse displacements through the thickness, and abrupt discontinuity in slope of the in-plane displacements at any interface. The effect of inplane and rotary inertia terms is included. The analysis is carried out using finite element approach. The influences of various terms in the higher-order displacement field on the free vibrations, and transient dynamic response characteristics of cylindrical composite shells subjected to thermal and mechanical loads are analyzed.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.139-146
• /
• 2001

The seismic safety analysis were performed for the center-core rockfill dam(CCRD) The static and pseudo-static FEM analysis using seismic coefficient Method, and dynamic FEM analysis using Hachinohe earthquake wave(0.12g) were used for the seismic safety of CCRD. The results of seismic analysis were that the factor of safety of down slope was 1.5, horizontal displacement is about 14.3cm, and vertical displacement is 3.3cm at dam creast. The model dam did not show any seismic stability problems for 0.12g. And much more research is still necessary in seismic safety of CCRD.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.147-154
• /
• 2001

In this study, comprehensive seismic performance analysis were performed for the concrete face rockfill dam(CFRD) designed seismic coefficient method(0. 10g). The static and pseudo-static FEM analysis, limited equilibrium method and dynamic FEM analysis were used for the dam safety analysis. The results of the seismic analysis were that the minimum factor of safety of down slope was 1.2 and horizontal displacement increased 8cm and vertical displacement increased 1.2cm at dam crest rather than those of static condition. The model dam did not show any serious tai lure in seismic stabi1ity for 0.13g. And much more research is still necessary in seismic safety of CFRD.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.561-568
• /
• 1997

Conventional confinement reinforcement for rectangular columns consist of closely spaced perimeter hoops, overlapping hoops, and crossties. One of the potential alternatives to conventional reinforcement is a welded reinforcement grid, prefabricated to required size and volumetric ratio of transverse reinforcement. An experimental investigation was carried out to investigate the strength and deformability of reinforced concrete columns confined with welded reinforcement grids. The comparisons of the envelopes of experimental force-displacement hysteric relationships for columns confined by welded grids with analytically generated force-displacement curves for columns confined with conventional ties. In general, inelastic deformability beyond the peak, as indicate by the slope of the cuvers, was similar to those indicated by columns with conventional ties. The superior performance of columns with welded grids may be attributed to the improved confinement characteristics of grids associated with increased rigidity of welded ties.