• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 하계학술발표회
• /
• pp.178-179
• /
• 2001

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.448-450
• /
• 2010

Free surface liquid jet impingement, which is applicable to cooling of hot plates in a steel-making process, is investigated numerically by solving the conservation equations of mass, momentum and energy in the liquid and gas phases. The free-surface of liquid-gas interface is tracked by an improved level-set method incorporating a sharp-interface technique for accurate imposition of stress and heat flux conditions on the liquid-gas interface. The level-set approach is combined with a non-equilibrium $k-{\omega}$ turbulence model. The computations are made for slit nozzle jets to investigate their flow and cooling characteristics. Also, the effects of jetting angle, velocity and moving velocity of plate on the interfacial motion and the associated flow and temperature fields are quantified.

• Journal of Ship and Ocean Technology
• /
• 제12권3호
• /
• pp.36-54
• /
• 2008

A jet stream applied tangential to a curved surface in fluid increases lift force by strengthening circulation around the surface and this phenomenon is known as the Coanda effect. Many experimental and numerical studies have been performed on the Coanda effect and the results found to be useful in various fields of aerodynamics. Recently, preliminary studies on Coanda control surface are in progress to look for practical application in marine hydrodynamics since various control surfaces are used to control behaviors of ships and offshore structures. In the present study, the performance of a Coanda control surface with different geometries of the jet injection nozzle was surveyed to assess applicability to ship rudders. A numerical simulation was carried out to study flow characteristics around a section of a horn type rudder subjected to a tangential jet stream. The RANS equations, discretized by a cell-centered finite volume method were used for this computation after verification by comparing to the experimental data available. Special attentions have been given to the sensitivity of the lift performance of a Coanda rudder to the location of the slit (outlet) and intake of the gap between the horn and rudder surface at the various angles of attack. It is found that the location of the water intake is important in enhancing the lift because the gap functions as a conduit of nozzle generating a jet sheet on the rudder surface.

• 한국가시화정보학회지
• /
• 제7권2호
• /
• pp.72-72
• /
• 2010

• 한국추진공학회지
• /
• 제26권1호
• /
• pp.60-67
• /
• 2022

본 연구는 정상초음파 가진 유무에 따른 초음파 무화 케로신 화염의 거동변이를 분석하기 위해 수행되었다. Slit-jet 노즐을 통과하며 생성된 연소영역은 DSLR, ICCD 및 초고속카메라와 슐리렌 기법을 통해 가시화되었고, 연료소모량은 정밀저울을 통해 측정하였다. 그 결과, 정상초음파 가진시, OH 라디칼의 강도가 증가하는 것이 관찰되었고 정상파장 상단부에서 최적 연소 조건이 형성됨을 확인하였다.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.2100-2108
• /
• 2001

The impinging tones by high-speed plane jets are experimentally investigated to study the edgetone characteristics. Experiment used a slit nozzle and a wedge system to generate edgetones. The jet in the experiment is varied from low to high subsonic speed to obtain the effect of the speed on the frequency characteristics of impinging tones. The experimental data obtained previously fur edgetones and platetones by various nozzles are compared with the present edgetone data. And the condition of tone generation, the frequency ranges, the effective source point and the sound pressure level are compared and discussed. It is found that the jet speed has no diect influence on the impinging tone characteristics. Regardless of the jet speed, the effective source point is about a quarter wavelength downstream from the edge tip. With increase in jet speed, the influence of the nozzle configuration is decreased and the operating frequencies show good coincidences by normalized parameters based on the slit thickness.

• 한국주조공학회지
• /
• 제31권5호
• /
• pp.288-292
• /
• 2011

In order to complement the drawbacks of quartz crucible such as fragile-like break and melt-leakage through open slit nozzle, a new PFC system has been developed using a common graphite crucible and plugging system. The u melt is fed on to the rotating a roll through slit nozzle by self-gravity. The new equipment was designed and manufactured successfully. An effort for optimizing all related parameter has been made. Then using the optimized parameters about 10 meters u foil having very thin thickness, which meets the target thickness of 130 ${\mu}m$ and enough width more than 60 mm could be made. The thickness homogeneity set improved, due to the lower eddy flowing of the melt flow the self-gravity feeding system.

• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.119-123
• /
• 2023

This study is normal orientation technology of slit coating equipment to improve the quality of curved displays. Currently, the demand for curved displays is increasing significantly due to advantages such as screen immersion or design in various industries. Accordingly, changes in the display coating process are essential. In the curved display coating process, unlike the existing flat coating process, the nozzle must be rotated along the curvature of the curved surface to spray the coating solution. The coating solution must be applied while maintaining a uniform thickness. If the thickness of the coating liquid applied to the target surface is non-uniform, the quality of the product may be degraded such as image quality deterioration and light spreading. This paper presents technology and experimental results for keeping the nozzle of slit coating equipment perpendicular to the curved surface and is expected to contribute to the quality improvement of curved displays.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1613-1620
• /
• 1990

본 연구에서는 일반적인 레이저 유속계를 사용하여 광전 증폭관내에 핀흘 대 신에 슬릿(slit)을 장치하고 광전증폭관을 측정영역에 90˚가 되도록 설치하여 in-situ calibration을 수행함으로써 분무의 입경과 속도를 동시에 계측할수 있다는 Yoon의 결과를 이용하고 모든 입자들의 궤적은 동일한 확률을 갖는다는 Yule와 Holve, Self의 가정을 기초로한 수학적인 Deconvolution에 의하여 계측방법에 발생되는 모순 점을 해결하였다. 일반적으로 분무특성해석을 위해서는 분무를 지배하는 기하학적인 변수, 입경분포, 액적의 속도분포, 밀도분포, 입경과 속도의 상관계수, 입자의 증발율 등이 규명 되어야하는데 본 연구에서는 이상류 동축노즐을 제작하고 이의 분무특성을 해석하기위하여 액적의 속도분포, 입경분포, 입경과 속도의 상관계수, 수밀도분포 등 을 계측하였다.

• 한국추진공학회지
• /
• 제21권1호
• /
• pp.17-25
• /
• 2017

초음파 진동자에 의해 미립화된 탄화수소계 액체연료를 태우는 버너의 연소특성을 고찰하기 위한 실험이 수행되었다. 고속카메라와 열화상 카메라를 이용하여 slit-jet 버너에서 생성된 화염의 이미지를 획득하였으며, 후처리를 통해 화염의 형상과 온도구배를 면밀히 분석하였다. 또한, 정밀유량 계측법을 이용하여 수송기체 실험조건 변화에 따른 연료소모량을 측정하였다. 그 결과, 수송기체 유량이 증가하면 무화된 연료의 분사량도 같이 증가한다는 사실을 확인하였으나, 낮은 유량 조건에서는 주변 장치의 진동에 의해 공연비(air/fuel ratio)와 수송기체 유량의 상관성이 관찰되지 않았다. 또한, 수송기체 유량과 초음파진동자의 소비전력이 증가하면 연소반응이 촉진되어 연소영역이 신장되고 화염온도가 증가하였다.