• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.7
• /
• pp.749-753
• /
• 2013

Hydraulic systems are used to transform mechanical energy and fluid energy into each other. Its applications are very wide over the whole industries such as automobiles, public works, rockets, machine tools, construction heavy equipments, airplaces and so on. They are hydraulic pumps that transform energy in the systems. In this study, with basic operation principles as a start point, I tried to understand how the rotating radius of a piston affects the lubrication characteristics in more practical conditions, a swash-plate with tilt angle zero capable of rotating motion and other devices was used. In this paper, a slipper was located on 45mm eccentricity from the center of a swash-plate. As a result, through this experiment, it was found that the rotating radius of a piston affects load capacity, leakage flow and lubrication characteristics and it is one of the important parts for improving the pump efficiency.

• Journal of Plant Biotechnology
• /
• v.43 no.1
• /
• pp.138-145
• /
• 2016

To find the optimal propagation condition for endangered Cypripedium macranthos Sw., also known as lady's slipper orchid, the effect of various organic additives on in vitro germination, protocorm formation and seedling growth was investigated during asymbiotic seed culture. When $100ml{\cdot}L^{-1}$ coconut water was added to the basal medium, the highest germination rate and protocorm formation rate were achieved, with 70.8% and 74.2% respectively. Supplementation of phloem sap from birch tree or maple tree also showed a facilitating effect to improve the germination and protocorm development. With $100ml{\cdot}L^{-1}$ birch sap or maple sap, both the germination and protocorm formation rates were roughly more than 65% and 68%. The roots and buds of the seedlings grew vigorously in the medium containing $100ml{\cdot}L^{-1}$ coconut water or phloem sap, in particular, their bud formation rates increased by more than 70%. Addition of banana powder and peptone could not create a more significantly favorable culture condition, and non-addition had the worst results. Our results demonstrated that proper organic amendments such as coconut water and phloem sap might be preferred to in vitro germination and the growth of seedlings developed from the protocorm of C. macranthos Sw. during asymbiotic seed culture.

• Journal of Plant Biotechnology
• /
• v.43 no.1
• /
• pp.132-137
• /
• 2016

The genus Cypripedium, known as lady's slipper orchid, has been considered to have a considerable marketability as a potted and garden plant with beautiful flowers; however, this species is becoming endangered and, in some places extinct, due to habitat destruction and illegal collections. As such, an optimized artificial propagation system is necessary for its conservation and horticultural cultivation. For the establishment of the in vitro proliferation of the endangered Cypripedium macranthos Sw., native to Korea, the effects of medium strength and sucrose concentrations on germination, protocorm formation and seedling growth were investigated through asymbiotic seed culture. The highest germination rate and protocorm formation rate were obtained with a 1/4 MS medium; higher MS medium strengths did not generate the favorable conditions required for germination and protocorm growth. The overall growth characteristics of roots and buds developed from protocorms were best in cultures of 1/4 MS medium. On this medium containing $10g{\cdot}L^{-1}$ sucrose, both the germination rate and protocorm formation rate increased significantly. The general growth properties of seedlings developed on the medium with $10g{\cdot}L^{-1}$ sucrose were best, showing the highest bud formation rate and root number. Our results demonstrate that the 1/4 MS medium, supplemented with $10g{\cdot}L^{-1}$ sucrose, could improve in vitro germination, and facilitate the growth of seedlings developed from the protocorms of C. macranthos Sw.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2791-2796
• /
• 2007

In their long journey through the cardiovascular circuit, erythrocytes are coerced to shape transform and assume different shapes on account of varying flow conditions in different blood vessels. The present work was aimed to visualize these erythrocyte shape transformations by an invitro microcirculatory model, and assess multi-shape erythrocyte deformability. The model uses an in-house fabricated, inexpensive disposable micro flow channel to mimic certain invivo conditions and a fast frame video microscopic system for imaging the shape changes in erythrocytes. Results show the multi-shape transformation of erythrocyte christened as discoidal shape, the asymmetrically deformed 'hat' and 'bullet-like' shapes, and the axially deformed 'slipper' and 'spindle-like' shapes. Specific erythrocyte showed the shape transition and transformation while passing through the observed window. The obtained erythrocyte shapes very analyzed for deformability index using image processing techniques that varied significantly (p <0.001) for different shapes as compared with the resting shape.

• Journal of Power System Engineering
• /
• v.16 no.1
• /
• pp.5-11
• /
• 2012

In this paper, the numerical analysis is introduced to predict the dynamic characteristics of piston pump assembly components in hydraulic piston pump for aircraft. Rotating cylinder block and reciprocating pistons are modelled kinematically. Furthermore, leakage flow and torque losses between the boundary surfaces of components are analyzed. This analysis has been carried out through the commercial CASPAR program. The simulations for stress on pump assembly components using the dynamic analysis model are performed using the ANSYS 11 program. Such dynamic characteristics and stress simulation procedures will be carried out repeatedly for the optimized design.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.11
• /
• pp.1022-1027
• /
• 2004

In this paper, an embedded foot pressure measurement system is proposed to measure foot pressure based on the embedded Linux system. To measure foot pressure data and to evaluate foot pressure distribution for the different insoles, FSR sensor, A/D converter, iPAQ PDA, and a time division measurement method are employed in the system. Utilizing this system, the foot pressure analysis has been performed for the different four shoes. The number of foot pressure/voltage conversion circuits are drastically decreased by the proposed time division measurement method from 406 to 14. The experimental results for the sandal, slipper, oxford shoes and sneakers demonstrate that the proposed system successfully performs the foot pressure measurement.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.3
• /
• pp.92-98
• /
• 2006

In this study, the behavior characteristics of a hydrostatic thrust bearing used in hydraulic equipment was analyzed using a commercial finite element program, ADINA. The solid domain was modeled with the fluid domain simultaneously to solve the fully coupled problem, because this is a problem where a fully coupled analysis is needed in order to model the fluid-structure interaction(FSI). The results such as bearing deformation, stress, film thickness and lifting bearing force were obtained through FSI analysis, and then they were compared with the results calculated from the classical method, a single step sequential analysis. It was found that the result difference between two analyses was increased according to the injection pressure. Therefore, in case of high pressure loading, it is desirable to conduct the FSI analysis to examine the deformation characteristics of a hydrostatic slipper bearing.

• Journal of Species Research
• /
• v.9 no.2
• /
• pp.174-179
• /
• 2020

Larvae and pupae of Simulium (Eusimulium) satsumense were collected and recorded from Korea for the first time. Detailed descriptions and photographs of both immatures are provided. Currently, 42 species are known from the subgenus Eusimulium, which is found globally, mainly in the Holarctic Region, but unknown from Korea. Members of the subgenus Eusimulium are morphologically homogeneous in male, female, and pupa, making them extremely difficult to distinguish from one another. S. (E.) satsumense can be distinguished from other Korean black flies by the following combination of the characteristics: Pupa: Gill of four slender filaments, dorsalmost filament strongly divergent from other filaments; cocoon slipper shaped without anterodorsal projection; Larva: Head spots distinctly positive; postgenal cleft short, apically rounded or squared; antenna with proximal segment brown; abdominal segments IX with prominent ventral tubercles; and rectal papillae of three simple lobes. In addition to descriptions for larvae and pupae of the species, a key to genera and subgenera of Simulium of Korean black flies are also provided.

• The Korean Journal of Mycology
• /
• v.50 no.4
• /
• pp.361-365
• /
• 2022

Here, Podospora leporina was isolated and cultured from Cypripedium guttatum Sw. (spotted lady's slipper), which was designated as an endangered wildlife class 1 by the Ministry of Environment. Further, Podospora sp., which is found in Calanthe discolor Lindl. (Japanese hardy orchid) root is recorded as an endophytic fungus in Jeju Island, Korea. However, there is no existing record of Podospora spp. Thus, in this study, we analyzed the morphological characteristics and two molecular markers, internal transcribed spacer (ITS) and large ribosomal subunit (LSU), of P. leporina and compared these data with other relative species. Consequently, this endophytic fungal species was confirmed as an unrecorded species in Korea, so we presented cultural characteristics and microstructures, such as the conidia of P. leporina.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.11-11
• /
• 2020

Background : The genus Cypripediums are typically adapted to the low temperature and cold climates of the high land in Korea. The species which were reported in Korean peninsula are C.japonicum, C.macranthos, C.calceolus and C.guttatum. We had already reported the successful germination of the C.macranthos and C.guttatum. The small spotted lady's slipper orchid(C.guttatum) is most endangered plants to extinction of which population was reported less than 100 in Korea. The objective of the present research is restoration of the C.guttatum in ex situ and adaptation in high land and nursery. Methods and Results : The 350 seedlings of C.guttatum were transplanted in soil at alpine area(altitude 750m) and the nursery of Korea National Arboretum(KNA) in YangPyeong city on May 2019 and 2020 in order to verify the possibility of ex situ restoration. The sprouted ratio of the seedlings were less than 10% in the alpine area and 83% in the nursery of KNA. The reasons of the diverse survival ratio are presumed as the low moisture content in the soil and heavy shade of the alpine area. The 15 cypripedium species and 29 hybrids were also effectively adapted in the KNA rare plant garden. Conclusion : These results demonstrated the difficulties of the restoration for small spotted lady's slipper orchid in the natural habitation. From the above results, we may conclude that the critical factors of the genus Cypripedium are intensive care for the fragile seedlings during the 1^st year acclimatization.