VVVF 전동차 팬터그래프의 주습판은 전차선과 미끄럼 접촉에 의한 집전을 하면서 편마모 등 이상마모 현상이 나타나게 된다. 우천 시에는 윤활성분이 손실되어 주습판과 전차선과의 왕복운동에 대한 마찰저항이 급상승하여 국부적 마모가 가속화 된다. 내마모 특성을 가져야 하는 동계 주습판의 특성을 고려하여 합금설계를 통해 제작된 개선 주습판의 현차시험 결과 이상마모와 편마모가 발생하지 않았다. 개선된 주습판의 밀도향상은 Fe-Ti의 부석효과를 상승시켜 우기 시에도 우수한 내마모성 및 내아크성을 유지함으로써 이상마모 발생을 방지하였다. 또한, 기계적, 전기적 마모에 의한 주습판의 성분 및 조성변화가 일어나지 않았다. 주습판의 내마모성 향상에 기여함과 더불어 우기와 동절기 등 악 조건하에서 현차시험을 거치고 전차선과의 상관관계도 분석하여 전 전동차에 적용하였다.
본 논문에서는 무선 전파 특성의 측정과 분석에 이용할 수 있는 측정 및 분석 시뮬레이터 프로그램을 개발 하였다. 프로그램은 GPIB 인터페이스를 통하여 측정 장비인 스펙트럼 분석기의 제어가 가능하고 측정된 데이터를 분석하여 평균 초과 지연(mean excess delay)과 RMS 지연 확산(RMS delay spread)을 산출해 낸다. 측정된 경로손실은 자유공간과 터널내의 이론적인 경로손실과 비교 할 수 있다. 측정되고 분석된 결과는 그래프의 형태로 출력된다. 측정 현장에서 데이터의 비교분석이 가능하기 때문에 본 프로그램은 측정의 수행과 검증함에 있어 매우 유용하다. 본 논문은 또한 2.45GHz 와 5.8GHz 주파수대역의 지하철 터널내의 전파경로에 의한 손실과 지연 특성을 측정하고 분석 하였고, 안테나의 빔 형태에 따른 전파경로 손실과 지연특성을 비교 분석 하였다. 터널은 송신안테나의 빔 형태와 무관하게 터널 내에 전파가 가득 차기 전까지는 자유공간과 비슷한 경로손실차를 가졌다. 터널 내에 전파가 가득차는 시점부터는 지하철 터널이 도파관 역할을 하여 LOS 및 N-LOS 구간 모두에서 자유공간에 비하여 손실차가 적게 나타났다. 고주파대역 보다는 저주파 대역인 2.45GHz에서 전파 경로에 의한 손실이 적었고, 신호의 수신 전력은 높게 측정 되었다. 지연특성에 있어서는 양 대역 모두에서 슬릿빔 안테나의 지연확산량이 가장 적게 나타났다.
공격 양상이 더욱 지능화되고 다양해진 봇넷은 오늘날 가장 심각한 사이버 보안 위협 중 하나로 인식된다. 본 논문은 UGR과 CTU-13 데이터 셋을 대상으로 반지도 학습 딥러닝 모델인 오토엔코더를 활용한 봇넷 검출 실험결과를 재검토한다. 오토엔코더의 입력벡터를 준비하기 위해, 발신지 IP 주소를 기준으로 넷플로우 레코드를 슬라이딩 윈도우 기반으로 그룹화하고 이들을 중첩하여 트래픽 속성을 추출한 데이터 포인트를 생성하였다. 특히, 본 논문에서는 동일한 흐름-차수(flow-degree)를 가진 데이터 포인트 수가 이들 데이터 포인트에 중첩된 넷플로우 레코드 수에 비례하는 멱법칙(power-law) 특징을 발견하고 실제 데이터 셋을 대상으로 97% 이상의 상관계수를 제공하는 것으로 조사되었다. 또한 이러한 멱법칙 성질은 오토엔코더의 학습에 중요한 영향을 미치고 결과적으로 봇넷 검출 성능에 영향을 주게 된다. 한편 수신자조작특성(ROC)의 곡선아래면적(AUC) 값을 사용해 오토엔코더의 성능을 검증하였다.
Vahed Ghiasi;Nur Irfah Mohd Pauzi;Shahab Karimi;Mahyar Yousefi
Geomechanics and Engineering
/
제34권3호
/
pp.267-284
/
2023
Landslides are one of the most dangerous phenomena and natural disasters. Landslides cause many human and financial losses in most parts of the world, especially in mountainous areas. Due to the climatic conditions and topography, people in the northern and western regions of Iran live with the risk of landslides. One of the measures that can effectively reduce the possible risks of landslides and their crisis management is to identify potential areas prone to landslides through multi-criteria modeling approach. This research aims to model landslide potential area in the Oshvand watershed using a support vector machine algorithm. For this purpose, evidence maps of seven effective factors in the occurrence of landslides namely slope, slope direction, height, distance from the fault, the density of waterways, rainfall, and geology, were prepared. The maps were generated and weighted using the continuous fuzzification method and logistic functions, resulting values in zero and one range as weights. The weighted maps were then combined using the support vector machine algorithm. For the training and testing of the machine, 81 slippery ground points and 81 non-sliding points were used. Modeling procedure was done using four linear, polynomial, Gaussian, and sigmoid kernels. The efficiency of each model was compared using the area under the receiver operating characteristic curve; the root means square error, and the correlation coefficient . Finally, the landslide potential model that was obtained using Gaussian's kernel was selected as the best one for susceptibility of landslides in the Oshvand watershed.
ICT 인프라의 이상탐지를 통한 유지보수와 장애 예방이 중요해지고 있다. 장애 예방을 위해서 이상탐지에 대한 관심이 높아지고 있으며, 지금까지의 다양한 이상탐지 기법 중 최근 연구들에서는 딥러닝을 활용하고 있으며 오토인코더를 활용한 모델을 제안하고 있다. 이는 오토인코더가 다차원 다변량에 대해서도 효과적으로 처리가 가능하다는 것이다. 한편 학습 시에는 많은 컴퓨터 자원이 소모되지만 추론과정에서는 연산을 빠르게 수행할 수 있어 실시간 스트리밍 서비스가 가능하다. 본 연구에서는 기존 연구들과 달리 오토인코더에 2가지 요소를 가미하여 이상탐지의 성능을 높이고자 하였다. 먼저 다차원 데이터가 가지고 있는 속성별 특징을 최대한 부각하여 활용하기 위해 멀티모달 개념을 적용한 멀티모달 오토인코더를 적용하였다. CPU, Memory, network 등 서로 연관이 있는 지표들을 묶어 5개의 모달로 구성하여 학습 성능을 높이고자 하였다. 또한, 시계열 데이터의 특징을 데이터의 차원을 늘리지 않고 효과적으로 학습하기 위하여 조건부 오토인코더(conditional autoencoder) 구조를 활용하는 조건부 멀티모달 오토인코더(Conditional Multimodal Autoencoder, CMAE)를 제안하였다. 제안한 CAME 모델은 비교 실험을 통해 검증했으며, 기존 연구들에서 많이 활용된 오토인코더와 비교하여 AUC, Accuracy, Precision, Recall, F1-score의 성능 평가를 진행한 결과 유니모달 오토인코더(UAE)와 멀티모달 오토인코더(Multimodal Autoencoder, MAE)의 성능을 상회하는 결과를 얻어 이상탐지에 있어 효과적이라는 것을 확인하였다.
Most crop damages have been occurred by vermin(e.g., wild birds and herbivores) during the period between seeding and the cotyledon level. In this study, to minimize the damage by vermin and acquire the benefits such as protection against weeds and maintenance of water content in soil, immediately vinyl mulching after seeding was devised. Vinyl mulching has been generally covered with black color vinyl, that crop seeding locations cannot be detected by visible light range. Before punching vinyl, non-contact and non-destructive methods that can continuously determine the locations are necessary. In this study, a crop position detection method was studied that uses infrared thermal image sensor to determine the cotyledon position under vinyl mulch. The moving system for acquiring image arrays has been developed for continuously detecting crop locations under plastic mulching on the field. A sliding mechanical device was developed to move the sensor, which were arranged in the form of a linear array, perpendicular to the array using a micro-controller integrated with a stepping motor. The experiments were conducted while moving 4.00 cm/s speed of the IR sensor by the rotational speed of the stepping motor based on a digital pulse width modulation signal from the micro-controller. The acquired images were calibrated with the spatial image correlation. The collected data were processed using moving averaging on interpolation to determine the frame where the variance was the smallest in resolution units of 1.02 cm. For this study, the spline method was relatively faster than the other polynomial interpolation methods, because it has a lower maximum order of formulation when using a system such as the tridiagonal linear equation system which provided the capability of real-time processing. The temperature distribution corresponding to the distance between the crops was 10 cm, and the more clearly the leaf pattern of the crop was visually confirmed. The frequency difference was decreased, as the number of overlapped pixels was increased. Also the wave pattern of points where the crops were recognized were reduced.
마찰력(friction)은 급정지나 급출발, 또는 두 동작이 동시에 이루어질 때, 미끄럼방지는 효과적으로 이루어져야 하며, 특히 테니스, 농구, 배구 등 코트 스포츠에 있어서 최적의 마찰력은 필수적이다. 이러한 마찰력은 무게가 많이 나갈수록, 다른 물체와의 접촉면이 넓을수록, 장력이 클수록 커진다. 또한 표면이 매끄러울 때보다는 거칠수록 커지는 특성을 가지며, 본 연구의 목적은 테니스화겉창과 테니스코트에 설치되어 있는 스토츠바닥재사이에 마찰력을 대해서 고찰해 보고자 하였으며, 마찰력운동 및 이의 관련 선행 국외 연구활동이 어떻게 이루어졌는지를 종단적 국외문헌조사를 통해 어떤 상관관계가 있는지를 구명해 보고자 하였다. 국내 테니스화의 연구와 테니스스포츠바닥재간의 국외 연구활동의 종단적 연구지표로서 스포츠와 스포츠바닥재간의 마찰력 관련주요연구연표를 작성해 봄으로서 연구활동의 경과추이를 조사하였다. 테니스 바닥재 현황으로는 테니스코트의 표층재는 일반적으로 천연재료를 사용한 클레이계코트와 합성재료를 사용한 전 천후계 하드코트로 구별된다. 본 연구를 통하여 테니스화 겉창과 테니스 스포츠바닥재간의 마찰력의 국외선행연구현황 이해를 돕고, 향후 국내에서 스포츠화 겉창과 마찰력, 스포츠바닥재와 마찰력의 평가에 대한 연구시 국외에서 기 실시된 연구를 중복연구하는 시행착오 방지 및 국외 선행연구에 대한 기초자료 및 연구현황을 자세히 파악할 수 있을 것으로 사료된다.
The effects of lowering ECAP temperature during ECAP process and Post-ECAP annealing on microstructure, texture and mechanical properties of the AZ31 alloys have been investigated in the present study. The as-extruded materials were ECAP processed to 2 passes at 553K prior to subsequent pressing up to 6 passes at 523K or 493K. When this method of lowering ECAP temperature during ECAP was used, the rods could be successfully deformed up to 6 passes without any surface cracking. Grain refinement during ECAP process at 553K might have helped the material to endure further straining at lower deformation temperatures probably by increasing the strain accommodation effect by grain boundary sliding, causing stress relaxation. Texture modification during ECAP has a great influence on the strength of Mg alloys because HCP metals have limited number of slip systems. As slip is most prone to take place on basal planes in Mg at room temperature, the rotation of high fraction of basal planes to the directions favorable for slip as in ECAP decreases the yield stress appreciably. The strength of AZ31 Mg alloys increases with decrease of grain size if the texture is constant though ECAP deformation history is different. A standard positive strength dependence on the grain size for Mg alloys with the similar texture (Fig. 1) supports that the softening of ECAPed Mg alloys (a negative slope) typically observed despite the significant grain refinement is due to the texture modification where the rotation of basal planes occurs towards the orientation for easier slip. It could be predicted that if the original fiber texture is restored after ECAP treatment yielding marked grain refinement, yield stress as high as 500 MPa will be obtained at the grain size of ${\sim}1{\mu}m$. Differential speed rolling (DSR) with a high speed ratio between the upper and lower rolls was applied to alter the microstructure and texture of the AZ31 sheets. Significant grain refinement took place during the rolling owing to introduction of large shear deformation. Grain size as small as $1.4{\mu}m$ could be obtained at 423K after DSR. There was a good correlation between the (0002) pole intensity and tensile elongation. This result indicates that tensile ductility improvement in the asymmetrically rolled AZ31 Mg alloys is closely related to the weakening of basal texture during DSR. Further basal texture weakening occurred during annealing after DSR. According to Hall-Petch relation shown in Fig. 1, the strength of the asymmetrically rolled AZ31 is lower than that of the symmetrically rolled one when compared at the same grain size. This result was attributed to weakening of fiber texture during DSR. The DSRed AZ31, however, shows higher strength than the ECAPed AZ31 where texture has been completely replaced by a new texture associated with high Schmid factors.
최근 IEEE (Institute of Electrical and Electronics Engineers) 802.15.4a TG (Task Group)에서는 저소비, 저전력 뿐만 아니라 다수개의 피코넷이 공존하는 즉, SOPs (simultaneously operating piconets) 환경하에서 거리 인지가 가능하도록 규정하고 있으며 거리인지 (ranging)의 서비스에 따라 Ternary 코드를 이용한 coherent/non-coherent 방안이 표준으로 채택되었다. 그러나 표준안에서 제시된 최소의 펄스 간 간격(Pulse Repetition Interval; PRI)은 채널의 최대 초과 지연 aximum Excess Delay; MED) 보다 좁아 펄스 간 간섭 (Inter-Pulse Interference; IPI) 문제가 발생되어 DS(Direct Sequence) 기반의 추정기법으로는 부정확한 최초 도착 시간(Time Of Arrival; TOA)을 얻게 된다. 따라서 본 논문에서는 IPI을 줄이면서 고정밀 TOA를 추정하기 위한 비주기적 펄스 전송 (non-periodic transmission; NPT) 패턴 기법을 제안한다. 수신단은 저속 무선 개인 영역 네트워크의 모티브를 고려하여 에너지 검출을 이용한 non-coherent 기반의 수신 구조로 구성하였다. TOA 정보는 슬라이딩 상관처리 후 역 탐색 구간 (Search Back Window; SBW)을 두어 오차를 감소시키고 사전 정해진 임계치를 이용하여 얻기 된다. 제안된 펄스 패턴 기법에 대한 성능을 검증하기 위해서 BEE 802.15.4a TG에서 제시한 두 가지 채널 모델을 적용하였고 시뮬레이션 결과로부터 제안된 기법이 다수개의 피코넷이 공존하는 다중 경로 환경에서 일반적인 기법보다 성능이 개선됨을 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.