• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.277-278
• /
• 2006

This paper presents circuit models and control algorithms of distributed generation system(DGS) which consists of Z-type converter and PWM inverter Z-type converter which employs both the L and C passive components and shoot-through zero vectors instead of the conventional DC/DC converter in order to step up DC-link voltage. Discrete time sliding mode control with the asymptotic observer is used for current control.

• 한국정보통신학회논문지
• /
• 제21권6호
• /
• pp.1203-1211
• /
• 2017

본 논문은 유연관절로봇의 추종성능과 정합과 비정합 외란 모두에 대한 강인성을 향상시키기 위한 강인한 제어기를 제안한다. 제안된 제어기는 백스테핑 외란관측기(DOB), 수동성기반 제어기(PBC)와 적분슬라이딩모드 제어기(ISMC)가 백스테핑기법 형태로 구성되어 있다. 백스테핑 DOB는 링크측의 비정합 외란을 고려하는데 사용되며 모터측의 기준입력을 제공하는 역할을 한다. IDA-PBC는 모터측의 추종제어를 수행하며 적분슬라이딩모드제어와 결합될 때 공칭제어기의 역할을 하며 전체 공칭제어시스템의 안정도를 보장받도록 한다. 반면에 적분슬라이딩모드제어는 정합조건을 만족시키는 모터측의 외란의 영향을 제거하는데 사용된다. 링크측의 제어기를 설계하는데 있어서는 PD타입의 임피던스제어기와 DOB가 결합됨으로써 강인한 제어특성과 함께 모터측의 기준입력에 적합한 연속적인 입력의 제공이 가능하도록 하였다.

• 한국정보통신학회논문지
• /
• 제21권1호
• /
• pp.173-179
• /
• 2017

본 논문은 고자유도의 로봇에 대한 강인한 임피던스제어를 제안한다. 자유도가 높은 로봇에 대해서 동특성기반으로 제어하기 위해서는 해석적인 로봇의 동특성확보가 거의 불가능하기 때문에 수치해석적인 모델을 사용하게 된다. 이에 근본적으로 모델링오차가 존재하고 작업공간에서 임피던스제어기를 설계하는 경우에 많은 개수의 관절의 움직임의 영향을 받기 때문에 강인제어의 필요성이 더욱 절실하다. 이에 모델링 불확실성과 외란의 존재와 상관없이 원하는 임피던스를 유지하기 위해서는 공칭계통의 동특성에 슬라이딩모드의 강인성을 추가할 수 있는 적분슬라이딩모드제어를 도입하였고 입력외란의 영향을 제거할 수 있는 외란 관측기를 동시에 적용한 강인한 임피던스제어기를 제안하였다. 외란과 모델 불확실성이 존재함에도 불구하고 공칭계통을 기반으로 한 임피던스제어기의 특성을 그대로 유지할 수 있는 제어기가 설계되었다.

• Journal of Electrical Engineering and information Science
• /
• 제3권1호
• /
• pp.58-66
• /
• 1998

A continuous, accurate, and robust variable structure tracking controller(CVSTC) is designed for brushless direct drive servo motors(BLDDSM). Although conventional variable structure controls can give the desired tracking performances, there exists an inevitable chattering problems in control input which is undesirable for direct drive systems. With the presented algorithm, not only the chattering problems are removed by using the efficient compensation of the disturbance observer, but also the prescribed tracking trajectory can be obtained using the sliding dynamics when an initial of the desired trajcetory is different from that of a BLDDSM. The design of the sliding mode tracking controller for the prescribed, accurate, and robust tracking performance without the chattering problem is given based on the results of the detailed stability analysis. The usefulness of the suggested algorithm is demonstrated through the computer simulation for a BLDDSM under load variations.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.214-230
• /
• 2014

This paper presents a high performance sensor less control four motorized wheels for electric vehicle. Firstly, we applied a sensor less master-slave DTC based control to both the two in wheel motors by using sliding mode observer for its quick response and its high reliability in electric vehicle application. Secondly, to overcome the possible loss of adherence of one of the four wheels which is likely to destabilize the vehicle a solution is proposed in this paper. Thirdly, a Fuzzy logic anti-skid control structure well adapted to the non-linear system is used to overcome the main problem of power train system in the wheel road adhesion characteristic. Various Simulation results have been include in this paper to show that the proposed control strategy can prevent vehicle sliding and show good vehicle stability on a curved path.

• 한국정밀공학회지
• /
• 제23권7호
• /
• pp.168-176
• /
• 2006

Nowadays, Three dimensional printing (3DP) technique that is one of solid freeform fabrication (SFF) technology has been notable issue, and has been applied by various fields. The SFF system can fabricate three dimensional objects of solid freeform with high speed and low cost using ink jet printing technology. In this research, a SFF system to analyze 3DP process technology is developed. We applied sliding mode control with sliding perturbation observer (SMCSPO) algorithm and minimized position error to the developed SFF system. We analyzed and optimized process variables such as jetted volume, layer thickness, powder bed and so on experimentally. Also. the dimensional error of a developed SFF system is evaluated. Finally, the feasibility of application to bio manufacturing is presented through successful fabrication of teeth and cranium model.

• 제어로봇시스템학회논문지
• /
• 제22권5호
• /
• pp.320-325
• /
• 2016

This paper presents a robust finite-time sliding mode control (SMC) scheme for unknown disturbance and unmodeled nonlinear friction and dynamics in the robotic manipulator. A finite-time SMC (FSMC) surface and finite-time sliding mode controller are constructed to obtain faster error convergence than the conventional infinite-time based SMC. By adding prescribed constraint control term to a finite-time SMC to compensate for unknown disturbance and uncertainties, a robust control scheme can be designed as well as faster convergence control. In addition, simpler controller structure is built by using feed-forwarding upper bound coefficients of each manipulator dynamic parameters instead of model-based control or adaptive observer to estimate unknown manipulator parameters. Simulation and experimental evaluations highlight the efficacy of the proposed control scheme for an articulated robotic manipulator.

• 한국소음진동공학회논문집
• /
• 제15권3호
• /
• pp.290-296
• /
• 2005

This paper proposes the modeling scheme of the Miniature Universal Testing Machine (MUTM) composed of 36 thin-beam-type bimorph PZTs and the control algorithm to minimize the residual vibration of the MUTM in the dynamic testing of specimens. In the operation of the MUTM, hysteresis, residual displacement and vibration of it are major issues. From the analysis of the MUTM behaviors, the hysteresis is described by the curving fitting scheme with the function of an input voltage. The dynamic characteristics of the MUTM are identified by the frequency domain modeling technique based on the experimental data. The interested bandwidth is focused on 125-315HZ for effective modeling and control. For the robust vibration control of the MUTM, the sliding mode control and the Kalman filter as observer are proposed. The paper also proposes the best input signal type to operate the MUTM effectively. The feasibility of the proposed modeling scheme and control algorithm are tested and verified experimentally.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.476-481
• /
• 2004

This paper proposes the modeling scheme of the Miniature Universal Testing Machine (MUTM) composed of 36 thin-beam-type bimorph PZTs and the control algorithm to minimize the residual vibration of the MUTM in the dynamic testing of specimens. In the operation of the MUTM, hysteresis, residual displacement and vibration of it are major issues. From the analysis of the MUTM behaviors, the hysteresis is described by the curving fitting scheme with the function of an input voltage. The dynamic characteristics of the MUTM are identified by the frequency domain modeling technique base on the experimental data. The interest bandwidth is focused on 125-315HZ for effective modeling and control. For the robust vibration control of the MUTM, the sliding mode control and the Kalman filter as observer are proposed. The paper also proposes the best input signal type to operate the MUTM effectively. The feasibility of the proposed modeling scheme and control algorithm are tested and verified experimentally.

• 한국정밀공학회지
• /
• 제14권1호
• /
• pp.174-184
• /
• 1997

This paper presents a robust force tracking control of a smart flexible gripper featured by a piezoceramic actuator characterizing its durability and quick response time. A mathematical governing equation for the proposed gripper structure is derived by employing Hamilton's principle and a state space control model is subsequently obtained through model analysis. Uncertain system parameters such as frequency variation are included in the control model. A sliding mode control theory which has inherent robustness to the sys- tem uncertainties is adopted to design a force tracking controller for the piezoceramic actuator. Using out- put information from the tip force sensor, a full-order observer is constructed to estimate state variables of the system. Force tracking performances for desired trajectories represented by sinusoidal and step func- tions are evaluated by undertaking both simulation and experimental works. In addition, in order to illustrate practical feasibility of the proposed method, a two-fingered gripper is constructed and its performance is demonstrated by showing a capability of holding an object.