• 지질공학
• /
• 제34권2호
• /
• pp.317-327
• /
• 2024

대규모 암반 사면에서 비연속성의 절리계가 발달할 때, 계단상 활동면에 의한 사면 파괴가 발생할 수 있다. 계단상 활동면은 절리-절리 활동면 또는 절리-암교 활동면으로 구분할 수 있으며, 절리-암교 활동면에서 암교는 절리와 평행한 전단 저항과 절리에 수직인 인장 저항을 제공한다. 계단 경로 파괴는 활동 암괴의 하중에 의해 암교의 파괴가 발생하여 암교 양단의 두 절리가 연결되며 발생한다. 암교의 길이가 동일하다면 암석의 인장강도가 전단강도에 비해 낮으므로 절리에 수직으로 형성된 암교가 파괴에 취약하며, 불연속면 간격/길이의 비가 작을수록 계단 경로 파괴의 가능성이 커진다. 비연속성의 절리가 발달하는 암반 사면의 계단상 활동 파괴 위험에 대한 평가를 위해서는 체계적인 불연속면 조사 및 분석을 통해 계단 경로 파괴면을 구성하여 한계 평형 해석 또는 수치 해석 등의 안정성 평가를 수행하여야 한다.

• 한국안전학회지
• /
• 제31권5호
• /
• pp.149-157
• /
• 2016

This paper presents the traffic speed limit of heavy vehicles at each wind velocity region, which is based on their accident risk analysis under cross-wind. The variables for the accident risk analysis are overall height, overall length, intake weight, and friction coefficient of the road surface. It was confirmed from analysis results that the risk of overturning increased with higher overall height and length, and the risk of sliding decreased with higher intake weight. The risk of sliding was largest at the friction coefficient of 0.1, and the risk of overturning was lagest at friction coefficient more than 0.25. Finally, traffic speed limit was proposed by using the accident risk analysis.

• 동력기계공학회지
• /
• 제13권6호
• /
• pp.123-128
• /
• 2009

The effects of temperature and initial crack length on the impact fracture behavior for the side plate material of FRP ship were investigated. And the effects of the counterpart roughness and sliding distance on the volumetric wear of same material were investigated as well. Impact fracture toughness of GF/PE composites displayed maximum value when the temperature of specimen is room temperature and $50^{\circ}C$, and with decreasing the temperature of specimen, impact fracture toughness decreased. Impact fracture energy of GF/EP composites decreased with increasing the initial crack length of specimen, and this value decreased rapidly when the temperature of specimen is lowest, $-25^{\circ}C$. It is believed that sensitivity of notch on impact fracture energy were increased with decreasing the temperature of specimen. With increasing the sliding distance, the transition sliding distance, which displayed different aspect on the friction coefficient and the volumetric wear loss, were found out. Counterpart roughness had a big influence on the wear rate at running in period, however the effect of counterpart roughness became smaller with sliding speed increase in. Volumetric wear loss were increased with increasing the applied load and the counterpart roughness.

• 한국항해항만학회지
• /
• 제35권7호
• /
• pp.575-580
• /
• 2011

It is important to understand the trajectory of structure in launching process because of the short time of launching process may result in unexpected accidents or damage to structures. The high risk of structural failure is not avoidable without the fully comprehension of changing forces in launching procedure. The commercial software can evaluate the motion of launching event in calm water condition but there is the limitation of research application because of the programmed commercial software. The launching process of the spar hull is suggested with stage concept that is divided into 10 stages in time domain. A force equilibrium diagram is derived for each stage where the changes of force vector and motion characteristics take place. In particular, the effects of changes in buoyancy and drag force due to the progressive submergence of the spar hull are taken into account by means of a touch length concept. The results contained in this paper provide the valuable information of the trajectory motion evaluation with suggested methods in spar launching process with sliding barge. Furthermore, the presented stage concept and touch length concept will provide basic knowledge for understanding launching process and help to develop further research area for launching analysis.

• 열처리공학회지
• /
• 제12권2호
• /
• pp.136-144
• /
• 1999

The study on the wear characteristics of compound layers formed during gaseous nitrocarburising in the medium carbon boron steels and the plain carbon steel has been carried out by using a pin-on-disc type wear test machine under the oil lubricating condition at room temperature and by varying applied loads, sliding speeds and wear distances. Values of friction coefficient measured at the sliding speed of 0.4m/sec under the oil lubricating condition have been shown to decrease considerably with increasing applied load and become gradually a constant value as load is increased to a higher value, showing that the transition load for friction coefficient appears at an applied load of 247.2N. The length and volume wear rates of compound layer have been revealed to relatively constantly increase, also showing that the wear life per unit thickness of compound layer turns out to be superior as porous layer has a denser and thinner appearance. As the sliding speed increases during wear test performed by varying sliding speed at a load of 63.2N under the oil lubricating condition for medium carbon boron steel nitrocarburised in gas atmosphere, the wear rate has been found to increase, the friction coefficient to decrease and the wear life per unit thickness of compound layer to decrease considerably.

• Coupled systems mechanics
• /
• 제3권3호
• /
• pp.291-304
• /
• 2014

Paper discusess a dynamic engineering problem of a mass attached to a pendulum sliding along a cable. In this problem the pendulum mass and the cable are coupled together in a model described by a system of differential algebraic equations (DAE). In the paper we have presented formulation of the system of differential equations that models the problem and determination of the initial conditions. The developed model is general in a sense of free choice of support location, elastic cable properties, pendulum length and inclusion of braking forces. Examples illustrate and validate the model.

• 한국산학기술학회논문지
• /
• 제20권5호
• /
• pp.73-80
• /
• 2019

본 논문은 기존 5ton 카고 트럭의 적재함을 개조하여 농기계의 상, 하차를 손쉽게 할 수 있도록 하는 전동 유압 슬라이딩 데크를 개발하기 위하여 전동 유압 슬라이딩 데크 시스템의 기본 설계를 수행하였고, 기구학적 해석을 통하여 슬라이딩 데크의 길이와 구조를 고안 하였으며, 구조해석을 통하여 안전성과 경제성을 고려한 재질을 선정하였다. 먼저 슬라이딩 데크 시스템의 기본 설계를 위하여 운송 대상 농기계를 조사하였고, 필요한 요소들을 선정하였다. 선정한 요소들을 충족시킬 수 있는 유압실린더를 이용한 시스템을 고안하였다. 단순화 모델링과 기구학적 다이어그램을 통하여 슬라이딩 데크 시스템의 작동 구조를 파악하였으며, 기구학 해석을 통해 슬라이딩 데크의 최소길이와 그 구조를 고안하였다. 안전성과 경제성을 모두 만족하는 재질을 선정하기 위하여, 자동차 구조물에 사용되는 대표적인 4가지 재질을 선정하였다. 해석이 필요한 부분을 선정하고, 단순화 모델링을 통해 최대하중을 받는 조건에서 재질에 따른 응력과 변형량을 비교하였다. 그 결과 SS41P 재질사용하면 단가를 줄이고 안전성을 만족하는 결과를 얻을 수 있었다. 작동이 불가능한 농기계의 상, 하차를 위하여 윈치 시스템을 설계하고 적용하였다.

• 한국산학기술학회논문지
• /
• 제18권6호
• /
• pp.21-28
• /
• 2017

농기계 상하차를 위한 전동 유압 슬라이딩 데크 시스템을 개발하는데 있어 경량화가 필수적이며, 이를 해결하기 위해 덤프 각도에 따른 슬라이딩 데크의 진출길이를 계산하고, 허용가능 각도 중 가강 큰 하중 받는 각도에서 재질과 두께를 변경하며 구조해석을 진행, 최적 두께와 재질을 선정하였다. 먼저 슬라이딩 데크 진출길이 계산식을 도출하기 위해 전체 시스템의 구성을 파악하고, 시스템을 단순화 하는 작업을 시행하였다. 또한 시스템의 입 출력 관계를 파악하기 위해 자유도 계산을 수행 하였고, 단순화한 모델을 이용하여 덤프각도에 따른 슬라이딩 데크의 진출길이 계산식을 도출하였다. 도출한 계산식을 수치해석 프로그램을 이용하여 덤프각도에 따른 슬라이딩 데크 진출길이 계산을 수행하였고, 시스템의 최대 최소 각도에서의 진출길이를 파악 하였다. 신뢰성 확보를 위해 시스템의 축소모형을 제작하여 실험을 통해 계산식을 검증하였다. 슬라이딩 데크 재질과 두께를 결정하기 위해 데크를 단순화 하였고, 데크 제작에 쓰이는 대표적인 재질 두 가지를 선정하였다. 단순화한 모델을 해석 프로그램을 사용하여 최대 하중을 받는 조건에서 두께와 재질에 따른 변형량과 응력을 비교하였다. 해석결과 ATOS80을 이용할 경우 두께를 줄이면서 더 적은 변형량을 가지게 되어 경량화를 이룰 수 있다.

• The Journal of Korean Physical Therapy
• /
• 제28권6호
• /
• pp.393-397
• /
• 2016

Purpose: This study was conducted in an effort to determine the effects of various abdominal drawing-in maneuver (ADIM) on the thickness and length of the transversus abdominis (TrA) when using lumbar stabilization exercises on healthy adults. Methods: 72 healthy adults were divided into four groups of 18 subjects each, to which different ADIM methods were applied. 1) a simple ADIM exercise, 2) an ADIM with pressure bio-feedback units, 3) an ADIM exercise with sling, and 4) an ADIM exercise with sling and vibration. Changes in the thickness and sliding length of TrA were measured when ADIM was conducted in the supine position prior to exercise and again when beginning the exercises. Following exercise, changes in the thickness and sliding length of TrA were measured using the same methods. Differences in group measurements prior to and following exercise were compared using a one-way analysis of variance. A paired t-test was applied to compare the before and after differences within each group. Results: Differences in TrA thickness change revealed that the ADIM exercise with sling and vibration group showed a significant difference in measurements taken prior to and following exercise. Differences in TrA length change revealed that the ADIM exercise with sling and vibration group showed a significant difference in measurements taken prior to and following exercise. Conclusion: ADIM exercise with vibration stimulation conducted in the bridge posture while in a prone position using a sling can be recommended as an effective exercise to improve the function of lumbar TrA.

• 대한물리의학회지
• /
• 제9권3호
• /
• pp.293-299
• /
• 2014

PURPOSE: The purpose of this study was to investigate the effect of functional training using a sliding rehabilitation machine (SRM) on the mobility of the ankle joint and balance in children with cerebral palsy (CP). METHODS: The subjects consisted of 11 children who were diagnosed with spastic CP. They carried out the functional training using the SRM for 30 minutes, three times a week, for 8 weeks. Before and after all of the training sessions, the subjects were tested using the Pediatric Balance Scale (PBS) and Gross Motor Function Measurement (GMFM), range of motion (ROM) in the ankle joint, the pennation angle of the gastrocnemius muscle and the fascicle length of gastrocnemius muscle were measured to determine the mobility of the ankle joint and balance ability. RESULTS: There were significant differences between the pre-test and post-test in the PBS and GMFM. The ROM of the ankle joint was significantly increased after the functional training using the SRM. Moreover, the fascicle length was increased and the pennation angle was decreased after the functional training using the SRM, but the difference was not significant. CONCLUSION: These results suggest that functional training using the SRM may have some effect on the mobility of ankle joint and balance in children with CP. According to the results, this study could present an approach to the rehabilitation or treatment of children with CP.