• Journal of the Korea Concrete Institute
• /
• v.16 no.5 s.83
• /
• pp.635-643
• /
• 2004

In this study, the tensile strength of 321 full-sized grout-filled splice steeve specimens were compared and analyzed in order to afford the data for a reasonable and economical design of this system. The experimental variables analyzed in this study were embedment length of reinforcing bars, compressive strength of grout, sleeve geometry, loading pattern and final failure mode of specimen. Following main conclusions are obtained : 1) The strength of grout-filled splice sleeve tends to be improved with increasing compressive strength of grout and embedment length of reinforcing bars. Specially this tendency appears apparent in specimens of bond failure rather than rebar failure. 2) The results of this study show that the sleeve geometry have influence on the bond strength of grout-filled splice sleeve. 3) The grout-filled splice sleeve of bond failure don't show the difference of tensile strength according to size of rebar. 4) It is verified that the tensile strength required in ACI and domestic code is retained either when the compressive strength of grout over 70 MPa is used with embedment length of reinforcing bars over 4.5d or when the compressive strength of grout over 80 MPa is used with embedment length of rebars over 3.9d. 5) It is verified that the tensile strength required in AIJ code is retained in case when the embedment length of reinforcing bars is 0.8 times the rebar diameter longer than in ACI code.

• Fashion & Textile Research Journal
• /
• v.2 no.4
• /
• pp.353-359
• /
• 2000

The purpose of this study was to develop the jacket pattern drafting method for Korean middle-aged women. The study was composed as follows : 1. Body measurement and statistical analysis : Two hundreds and forty four middle-aged women between the ages of forty five and fifty nine were measured on 52 items. 2. Development of new jacket pattern drafting method : Measurement items necessary to draft new jacket pattern were back waist length, bust girth, waist girth, hip girth, back interscye breadth, front interscye breadth, neck base girth, nipple length, nipple to nipple breadth, 1/2 posterior shoulder length and sleeve length. Basic jackets constructed from the experimental patterns were examined through the fitting test. 3. Evaluation of the new pattern drafting method : The sensory evaluations for appearance and comfort were applied to evaluate the new jacket pattern by comparing it with one of the conventional jacket patterns (Lee Hyung-Suk's). According to the result of sensory evaluation, the new jacket pattern was more positive.

• Journal of Fashion Business
• /
• v.6 no.5
• /
• pp.96-111
• /
• 2002

The aim of this study was to suggest appropriate factors for production pattern making of women's clothing. Sample pattern designers and production patterners of 13 women's brands were individually interviewed about pattern making process and factors necessary. The results were as follows: The factors to be considered in pattern making were categorized in three groups. 1. Factors to be considered to achieve the correct use of specific materials: elasticity, shrinkage, lining and interlining 2. Factors to be considered to satisfy the design specifications: silhouette, dart distribution, collar and sleeve, trimming 3. Factors to be considered for better sewing quality: skillfulness of the sewer, sewing methods and sewing equipment. 4. Suggestions were made for appropriate factors. A focus-group-interview in pattern design has been interviewed to verify the suggested factors. The factors were presented as a guide to develop the production pattern. 5. For better usage of the factors, standardization were suggested for making process with necessary factors for jacket, skirt.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.3 no.1
• /
• pp.20-27
• /
• 1992

A synthesized isotropic pattern antenna can be realized by arrangeing $\lambda$/ 2 dipole along each x, y, z axis. The sleeve type $\lambda$/ 2 dipole antenna is used as a basic element for a proper impedance matching at feeding point and minimum mutual coupling effect between each element at 820 MHz - 895 MHz band. The total electric field intensity radiated from the designed isotropic pattern antenna is drived from the magnetic vector potential which is produced by each sleeve $\lambda$/ 2 dipole in the far field. This total electric field intensity is inversely proportional only to distance $\gamma$from the origin of coordinates, and pattern factor variation is less than 2.1dB. The measured value of total electric field variation depending on pattern factor is less then 2.8dB, and the difference between the calculated and measured value is 0.7dB.

• The Research Journal of the Costume Culture
• /
• v.23 no.6
• /
• pp.955-971
• /
• 2015

The purpose of this study is to consider the design characteristics of Chinese traditional clothing, especially from the Ming-Qing Dynasty era, and how they have influenced contemporary fashion. Regarding research methods, this study determined the design characteristics, such as the form, color and pattern of Chinese traditional clothing of the Ming-Qing Dynasty era. In addition, 440 photos were collected from the Paris Collection from 2005 to 2014 using www.firstviewkorea.com. The results of this study are as follows. First, the most popular silhouette from Chinese traditional clothing appearing in contemporary fashion was the H-shaped one, and the internal lines appeared in the following order: Chinese collar; narrow sleeve; symmetrical front opening; round collar; wide sleeve; and the C-shaped Biwa front-end. Second, the most popular color was achromatic black, followed by white. The chromatic colors were in the order of blue, yellow, red, green, and purple. Third, the patterns appeared in the following order: Plant patterns, complex patterns, and animal patterns. The peony pattern appeared the most commonly as a plant pattern, followed by the arabesque pattern and the plum blossom pattern which appeared with a similar proportion. Dragon, bird and phoenix patterns appeared the most for animal patterns. It is considered that the results of this study will be helpful for designing products for Korean fashion brands that will advance to the Chinese market. In addition, it will help Chinese designers apply the Chinese-style design characteristics popular among people throughout the world when they advance to the West.

• Fashion & Textile Research Journal
• /
• v.14 no.1
• /
• pp.109-121
• /
• 2012

This study aims at developing ergonomics patterns for the sleeve of structural firefighting protective clothing through 3D motion analysis in order to ensure efficiency and safety of firefighters who are exposed to harmful environment at work. A new research pattern was developed by applying the total results of 3D motion analysis, changes of body surface length measurements, and 2D data on 3D body shape analysis on the size 3 patterns of the existing coat sleeve. For the sleeves, we used the body surface length of the range of shoulder's flexion and the joint angle of the range of wrist's ulnar deviation. And for the production of structural firefighting protective clothing using the research pattern, we recruited a recognized producer of structural firefighting protective clothing designated by KFI. Unlike everyday clothes, structural firefighting protective clothing should be able to fully protect the wearers from the harmful environment that threatens their lives and should not cause any restrictions on their movement. Therefore, the focus of research and development of such protective clothing should be placed on consistent development of new technologies and production methods that will provide protection and comfort for the wearer rather than production cost reduction or operational efficiency. This study is meaningful as it applied 3D motion analysis instead of the existing methods to develop the patterns. In particular, since 3D motion analysis enables the measurement of the range of motion, there should be continuous research on the development of ergonomics patterns that consider workers' range of motion.

• Fashion & Textile Research Journal
• /
• v.20 no.6
• /
• pp.690-703
• /
• 2018

The purpose of this study is to help user understand the basic principles and interfaces of each program, and to provide a base material for the development of more efficient apparel CAD systems to compensate for each program's shortcomings by comparing the function of three apparel CAD systems: Yuka CAD, Opti-tex, and Style CAD. For this purpose, the skirt waistband and sleeve armhole line creation process were selected based on these two criteria. 1) There is a big difference between principle and method between CAD systems. 2) When CAD system is used rather than paper drawing process, the process is shortened and convenience is high. In this study, pros and cons and supplement point of each CAD system are suggested by comparing the functions of the CAD system performing the selected drafting process by four criteria: icon, key, method, and characteristic point. As a result of the study, it was confirmed that the three CAD systems differ in the basic principle and interface environment. As a result of analyzing the skirt waistband method function, it was confirmed that the band line is formed directly on the outline of the skirt and the band dart recognition function is the most efficient function and as a result of the analyzing the sleeve armhole line method function, it was confirmed that the curve generation function using the shape of the actual curve measure and the length adjustment function through the automation of the dimension calculation is the most efficient function.

• Journal of the Korean Society of Costume
• /
• v.44
• /
• pp.117-129
• /
• 1999

Hudan Bangryung-Banbee was the name for a traditional dress which had a square neckline collar. Among Bangryung-Banbee, there was a particular style which, plus with the square neckline collar, had the half-length sleeve, bodice whose back length was shorter than the front. This kind of style shown a big difference from the typical pattern of traditional Korean costumes which had the V neck and had to fold the neckband of the clothes in Y-shape. This study focused on the analysis of the change of Hudan(後短) Bangryung-Banbee style. Bangryung-Banbee of the half sleeve/shortened back style had been usually excavated around the period of the Japanese invasion of Chosun dynasty(1592-1598). And up to now this kind of the costumes was never found before the fifteenth century or after the eighteenth century in Korea. Therefore it is thought that Bangryung-Banbee was worn widely in the middle of the Chosun dynasty. However, the shape of the collar and the length of sleeve and of dress were variously used, so it must be recognized that there existed much more diverse styles of Bangryung-Banbee than it was known today. But as the times passed away, the lined Bangryung-Banbee disappeared, and the collar of Bangryung-Banbee changed from square neckline to rounded Wonsam(圓衫) or Baeja(背子)-shape. And in the case of Bangryung-Banbee's front length, the original style disappeared, while a new style of longer back appeared.

• Fashion & Textile Research Journal
• /
• v.10 no.6
• /
• pp.1023-1035
• /
• 2008

This study conducted a survey to find out dermatitis patients' preferred garment performance and their sentiment in spring/summer knitwears. SPSS 12.0 program was used for factor analysis, frequency analysis, T-test, ANOVA, and Duncan test. The result was as follows; First, in garments, patients required 'health hygiene', 'practicality in use care', 'skin contact' and 'easy movement'. Especially, 'skin contact' is an important property to be considered in patients' clothes. Second, in garment sensitivity, patients importantly considered 'modesty', 'feminine', 'boldness', 'decency', 'easy movement', 'youth', and 'simplicity'. Third, patients preferred simple and modest plain knitwear in light color with thin and soft fabric such as plain knit. And especially, dot pattern in knitwears should be avoided. Fourth, the preferred style of patients was that 'appropriately fit with suitable ease.' They also preferred 'front closed,' ; 'boat neckline' and 'V neckline'; 'raglan sleeve' and 'set-in sleeve'. For hem trim, they preferred 'rib'. Male preferred simple and plain style with round collar of 'tubular trim' and 'rib trim', while female preferred sophisticated and characteristic style with setin sleeve.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.5
• /
• pp.930-942
• /
• 1996

This study was done to provide the characteristics of body surface changes at armhole area. Experiments were carried out at upper arm and upper body inchuding 67 items, 74 segments by the stanard posture and arm movements. The subjects were 15 females of twenty aged. The major conclusions of this study are; 1. On the circumference items of upper arm, armhole circumference was decreased by all arm movement, especially high contracted on front armhole line. The most contracted segments of armhole circumference were from the shonlder point to front and back interscye breadth point. Axillary circumference was increased 5 cm to the utmost, so the function of sleeve pattern would be decided by axillary circumference. 2. The lengths of upper arm were decreased near center line, sleeve cap length was contracted 3∼4 cm. Posterior armpit point area was increased both length and breadth. According to the rates of expansion and contraction, the diagram of expansion and contraction of upper arm was suggested. 3. On upper body, back side chest breadth was increased exceedingly and shoulder length was decreased most. It was apparent that surface changes of upper body were greatly larger as far away from center front and center back line. The rates of expansion and contraction of upper body were also represented as a diagram of surface changes.