• 제목/요약/키워드: Sleep Monitor

검색결과 47건 처리시간 0.021초

내과 환자의 입원후 영양상태 변화 연구 (Changes in Nutritional Status of General Medical Patients During Hospitalization)

  • 양영희;최스미;김은경
    • 대한간호학회지
    • /
    • 제27권1호
    • /
    • pp.49-60
    • /
    • 1997
  • The purpose of this study was to determine the incidence of malnutrition among patients on admission to hospital, to monitor changes in their nutritional status during hospitalization, and to determine the factors which might affect changes in nutritional status. The subjects for the study were patients who were admitted to general medicine for more than one week. Patients suffering from cardiovascular. renal disease, or dehydration were excluded. Nutritional assessment of the patients was performed on admission and nutritional status was reassessed one week and two weeks after admission. The nutritional assessment tool consisted of subjective history taking and anthropometric measurements. Biochemical measurements were performed only on admission. For anthropometric assessment : patients' body weight, subcutaneous skinfolds thickness, % of body fat, body mass index, and lean body mass were measured using caliper or Bio impedance Analyzer. Factors which might influence current nutritional status, like dietary intake, anorexia, nausea, vomiting, diarrhea, sleep disturbance, and number of days of NPO for diagnostic examinations were analyzed. The results are as follows : 1. Of the 59 patients who were studied, 61% were male and 39% female. The nutritional status of all of the 59 subjects was reassessed one week after admission, but it was only done for 22 subjects at two weeks. 2. The anthropometric measurements. including weight body mass index, lean body mass, body fat. and skin fold thickness. were all significantly decreased at one week after admission compared to the values at admission. On the other hand, two weeks after admission, only body weight and abdominal skinfolds thickness were decreased. 3. The subjects reported anorexia for an average of two days, sleep disturbance for two days, and no food intake due to diagnostic test for one day. In the second week of hospitalization, almost none of the patients complained of gastrointestinal symptoms or sleep disturbance except anorexia. Food consumption which was measured based on rice intake was 60% of the food served during the first week of hospitalization, and 66% during the second week of hospitalization. 4. There was no correlation between the subjective nutritional assessment and anthropometric assessment. 5. There was no statistical significance in anthropometric measurements among the patients with various diseases whereas sleep disturbance and no food intake due to various diagnostic test was prominent in patients with gastrointestinal diseases.

  • PDF

PVDF 필름 기반 센서를 이용한 무구속적인 누운 자세 추정 (Unconstrained Estimation of Body Postures on Bed Using Polyvinylidene Fluoride Film-based Sensor)

  • 서상원;황수환;윤희남;정다운;최재원;이유진;정도언;박광석
    • 대한의용생체공학회:의공학회지
    • /
    • 제35권5호
    • /
    • pp.169-176
    • /
    • 2014
  • As body postures on bed affects various sleep related diseases, it is considered as important information when monitoring sleeping in daily life. Though there have already been a few approaches to monitor body postures on bed conventionally, the development for simple and unconstrained methods is still needed to realize the long-term daily monitoring. Focusing on the fact that ballistocardiogram changes depending on the body postures on bed, we developed a novel method to estimate body posturesusing extremely simple, film-type ballistocardiogram sensor which is based on polyvinylidene fluoride(PVDF) film. With 10 subjects, we performed two experiments. One was for an estimation test to show that body postures on bed can be estimated by ballistocardiogram, and the other was for a reproducibility test to present the feasibility of ballistocardiogram based body postures monitoring. To estimate body postures on bed, we made an individual template set of body postures by designating one ballistocardiogram (BCG) sample as a template in each postures. Then, we calculated Pearson's correlation coefficients between a sample and each templates and estimated the body posture of the sample by choosing a posture which corresponds to the most significant correlation coefficients. As a result, we estimated body postures on bed with 99.2% accuracy in average and found that the estimation using ballistocardiogram is reproducible.

Proposed Data-Driven Approach for Occupational Risk Management of Aircrew Fatigue

  • Seah, Benjamin Zhi Qiang;Gan, Wee Hoe;Wong, Sheau Hwa;Lim, Mei Ann;Goh, Poh Hui;Singh, Jarnail;Koh, David Soo Quee
    • Safety and Health at Work
    • /
    • 제12권4호
    • /
    • pp.462-470
    • /
    • 2021
  • Background: Fatigue is pervasive, under-reported, and potentially deadly where flight operations are concerned. The aviation industry appears to lack a standardized, practical, and easily replicable protocol for fatigue risk assessment which can be consistently applied across operators. Aim: Our paper sought to present a framework, supported by real-world data with subjective and objective parameters, to monitor aircrew fatigue and performance, and to determine the safe crew configuration for commercial airline operations. Methods: Our protocol identified risk factors for fatigue-induced performance degradation as triggers for fatigue risk and performance assessment. Using both subjective and objective measurements of sleep, fatigue, and performance in the form of instruments such as the Karolinska Sleepiness Scale, Samn-Perelli Crew Status Check, Psychomotor Vigilance Task, sleep logs, and a wearable actigraph for sleep log correlation and sleep duration and quality charting, a workflow flagging fatigue-prone flight operations for risk mitigation was developed and trialed. Results: In an operational study aimed at occupational assessment of fatigue and performance in airline pilots on a three-men crew versus a four-men crew for a long-haul flight, we affirmed the technical feasibility of our proposed framework and approach, the validity of the battery of assessment instruments, and the meaningful interpretation of fatigue and work performance indicators to enable the formulation of safe work recommendations. Conclusion: A standardized occupational assessment protocol like ours is useful to achieve consistency and objectivity in the occupational assessment of fatigue and work performance.

The Prevalence and Characteristics of Positional Obstructive Sleep Apnea

  • Kim, Cheon-Sik;Lee, Yong-Seok;Cho, Cheon-Ung;Pae, Sang-Ho;Lee, Sang-Ahm
    • 대한임상검사과학회지
    • /
    • 제44권2호
    • /
    • pp.52-58
    • /
    • 2012
  • Patients with obstructive sleep apnea (OSA) often have more aggravated symptoms in the supine position. We tried to investigate the clinical characteristics and the predictive factors for positional OSA. Polysomnographic data were reviewed for OSA patients (apnea hypopnea index, $AHI{\geq}5$) from April, 2008 to April, 2011 at the Asan Medical Center. Clinical data, comorbid medical condition data and questionnaires (SF-36, MFI-20, ESS, BDI, STAI) were assessed. All patients were classified into two groups: positional patients (PP) group and non-positional patients (NPP) group. PP was defined as a patient who had the AHI in the supine position was at least twice as high as that in the lateral position. The body position of patients was confirmed by sleep position sensor and video monitor. All patients had at least 30 minutes of positional and 30 minutes of non-positional sleep. We compared clinical, medical, polysomnographic data, and questionnaire results between two (PP and NPP) groups and investigated predictive factors for the PP group using binary logistic regression analysis. In total, 371 patients were investigated. 265 (71.4%) was categorized as PP group and 106 (28.5%) as NPP group. The mean age ($mean{\pm}SD$) was higher in the PP group ($52.4{\pm}9.8$) than in the NPP group ($49.5{\pm}11.9$) (p<0.05). Comparison of sleep parameters between the PP and the NPP group showed that the PP group had significantly lower BMI (PP: $26.1{\pm}3.2kg/m^2$; NPP: $27.8{\pm}4.3kg/m^2$, p<0.001), neck circumference (PP: $39.7{\pm}2.8cm$; NPP: $41.5{\pm}3.7cm$, p<0.001) and hypertension rate (PP: n=89/265 (33.5%); NPP: n=48/106 (45.2%), p=0.0240). In the PP group, the percentage of deep sleep (PP: $8.7{\pm}8.1%$; NPP: $5.6{\pm}7.0%$, P=0.001) and rapid eye movement (REM) (PP: $17.5{\pm}6.1%$; NPP: $14.0{\pm}6.9%$, p<0.001) were significantly higher whereas the percentage of light sleep (stage N1) was significantly lower than the NPP group (PP: $30.4{\pm}12.3$; NPP: $44.5{\pm}20.8%$, p<0.001). During the sleep, the AHI in the supine position (PP: $48.6{\pm}19.5$; NPP: $60.5{\pm}22.6$, p<0.001) and in the non-supine position (PP: $9.4{\pm}8.9$; NPP: $48.4{\pm}24.8$, p=<0.001) were significantly lower and the minimal arterial oxygen saturation in non-REM sleep was significantly higher in the PP group (PP: $80.3{\pm}7.6$; NPP: $75.1{\pm}9.9$, p=<0.001). There were no significant differences in all questionnaires including quality of life. The results of the binary logistic regression analysis showed that age, the amount of REM sleep(%) and AHI were significant predictive factors for positional OSA. The significant predictive factors for positional OSA were older age, higher percentage of REM and lower AHI. The questionnaire results were not significantly different between the two groups.

  • PDF

초절전형 PLC 2구 스위치 개발 (Ultra-Power-Saving 2 Ports PLC Wall Switch Development)

  • 한재용;이순흠
    • 대한전자공학회논문지SD
    • /
    • 제44권11호
    • /
    • pp.51-55
    • /
    • 2007
  • PLC 홈 네트워크용으로 보급되고 있는 스위치, 콘센트, 가스제어기 등의 단말기들은 일반적으로 부하가 연결되지 않은 상태에도 원격제어 또는 기기 간의 제어, 상태 감시 등을 위하여 항상 Wake-up 상태를 유지하고 있어야 한다. 이로 인하여 대기 시 불필요한 전력을 소비하는 문제점을 갖고 있다. 본 논문에서는 대기 시 소비 전력 및 동작 시 소비 전력을 최소화한 절전형 PLC 2구 스위치를 개발하였다. 대기 시 소비전력 최소화를 위해 Sleep Mode 전환 및 전력선 통신부와 제어부의 분리 등 회로를 개선을 하였으며 동작 시 소비전력 최소화를 위해 유지 제어방식에서 순간 제어방식으로 전환하였으며, 이로부터 스위치 수명 연장 및 고장률을 최소할 수 있었다. 기존 스위치에 비해 대기 시 약 0.95[W] 절감, 동작 시 약 3.2[W] 절감으로 에너지 절감을 실현하였다.

노인을 위한 스마트 홈 시스템 장기 모니터링 실증 연구 (A Long-term Monitoring Demonstration of Smart Home System for the Elderly)

  • 이지헌;차승현
    • 한국BIM학회 논문집
    • /
    • 제11권3호
    • /
    • pp.75-90
    • /
    • 2021
  • A smart home system improves the elderly's quality of life by monitoring and analyzing their movements and health conditions with better health-care and social support services. Therefore, there has been an effort to adopt a smart home system for the independently living elderly. However, to the best of our knowledge, no study has investigated the usability of a smart home system on actual independently living elderly housing in long-term settings. Thus, this study aims to demonstrate the usability of a smart home system on independently living elders in living lab conditions. The BLE smart band and the BLE receiver were chosen for the smart home system to monitor the movement of the participants in their homes as well as to monitor the heart rates, step counts, sleep index. Nine independent living elderly from the senior welfare center in Kimjae participated in this living lab demonstration experiment for ten months. This demonstration experiment confirmed the effectiveness of low-cost and easily adoptable IoT-based BLE sensor sets on independent living elders and discussed the troubles and limitations of the experiment. By grasping the pros and cons of IoT-based BLE sensor sets, this study seeks to improve the accessibility and usability of smart home systems for the elderly population in independent living arrangements.

Polysomnography를 위한 열전대 호흡센서 시스템의 설계 (Design of Respiratory Sensor System for polysomnography using Thermocouple)

  • 우용규;정도언;박광석
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
    • /
    • pp.121-123
    • /
    • 2000
  • Changes in breathing pattern and apnea both can be !he result of sleep disorders. The focus of this paper is to develop methodologies to monitor the breathing pattern and to detect apnea. An accurate recording of the respiratory phase can be carried out with different methods. One of these methods is the use of a thermocouple, which reacts to the variation in air temperature, placed in the nose and mouth of the patient. The K-type thermocouple was used because it has high reliability, thermo-stability, and good corrosion resistance. And also, it has a considerable long time constant that gives a low cut-off frequency, well below the respiratory frequency and thereby causing a large phase difference. The result showed that timing of respiration was accurately obtained with the AD595, amplifier for K-type thermocouple.

  • PDF

Symptoms-Based Power-Efficient Communication Scheme in WBSN

  • Sasi, Juniven Isin D.;Yang, Hyunho
    • 스마트미디어저널
    • /
    • 제3권1호
    • /
    • pp.28-32
    • /
    • 2014
  • It is practical nowadays to automate data recording in order to prevent loss and tampering of records. There are existing technologies that satisfy this needs and one of them is wireless sensor networks (WSN). Wireless body sensor networks (WBSN) are wireless networks and information-processing systems which are deployed to monitor medical condition of patients. In terms of performance, WBSNs are restricted by energy, and communication between nodes. In this paper, we focused in improving the performance of communication to achieve less energy consumption and to save power. The main idea of this paper is to prioritize nodes that exhibit a sudden change of vital signs that could put the patient at risk. Cluster head is the main focus of this study in order to be effective; its main role is to check the sent data of the patient that exceeds threshold then transfer to the sink node. The proposed scheme implemented added a time-based protocol to sleep/wakeup mechanism for the sensor nodes. We seek to achieve a low energy consumption and significant throughput in this study.

하드웨어 저전력 기능을 활용한 웨어러블 운영체제의 하이브리드 가버너 (Hybrid Governor for Wearable OS Using H/W Low-power Features)

  • 이성엽;김형신
    • 대한임베디드공학회논문지
    • /
    • 제13권3호
    • /
    • pp.117-124
    • /
    • 2018
  • Wearable devices have become widespread. Fitness band is one of common wearable devices, providing useful functions. It helps users to monitor and collect their status such as heart rate and travel distance. Wearable devices, including fitness bands, are designed in small size and it ends up having small battery capacity. In that regard, it is necessary to expand the lifetime of wearable devices. Conventional power management scheme of wearable devices is based on DVFS Ondemand Governor and peripheral control by timeout event, such as turning off the LCD. In this paper, we propose a hybrid governor applying hardware supporting low power mode such as sleep mode to exploit the periodicity of fitness band task. In addition, we show hybrid governor outperforms in power consumption than conventional power management scheme of wearable devices based on Ondemand Governor through experiments.

Lifetime Escalation and Clone Detection in Wireless Sensor Networks using Snowball Endurance Algorithm(SBEA)

  • Sathya, V.;Kannan, Dr. S.
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제16권4호
    • /
    • pp.1224-1248
    • /
    • 2022
  • In various sensor network applications, such as climate observation organizations, sensor nodes need to collect information from time to time and pass it on to the recipient of information through multiple bounces. According to field tests, this information corresponds to most of the energy use of the sensor hub. Decreasing the measurement of information transmission in sensor networks becomes an important issue.Compression sensing (CS) can reduce the amount of information delivered to the network and reduce traffic load. However, the total number of classification of information delivered using pure CS is still enormous. The hybrid technique for utilizing CS was proposed to diminish the quantity of transmissions in sensor networks.Further the energy productivity is a test task for the sensor nodes. However, in previous studies, a clustering approach using hybrid CS for a sensor network and an explanatory model was used to investigate the relationship between beam size and number of transmissions of hybrid CS technology. It uses efficient data integration techniques for large networks, but leads to clone attacks or attacks. Here, a new algorithm called SBEA (Snowball Endurance Algorithm) was proposed and tested with a bow. Thus, you can extend the battery life of your WSN by running effective copy detection. Often, multiple nodes, called observers, are selected to verify the reliability of the nodes within the network. Personal data from the source centre (e.g. personality and geographical data) is provided to the observer at the optional witness stage. The trust and reputation system is used to find the reliability of data aggregation across the cluster head and cluster nodes. It is also possible to obtain a mechanism to perform sleep and standby procedures to improve the life of the sensor node. The sniffers have been implemented to monitor the energy of the sensor nodes periodically in the sink. The proposed algorithm SBEA (Snowball Endurance Algorithm) is a combination of ERCD protocol and a combined mobility and routing algorithm that can identify the cluster head and adjacent cluster head nodes.This algorithm is used to yield the network life time and the performance of the sensor nodes can be increased.