• 제어로봇시스템학회논문지
• /
• 제16권7호
• /
• pp.681-687
• /
• 2010

In this paper, an implementation of force control for a slave mobile robot in tele-operation environment is presented. A mobile robot is built to have a force control capability with a force sensor and tested for force tracking control performances. Both position and contact force are regulated by a PID based hybrid control method and the impedance force control method. To minimize accumulated errors due to the adaptive impedance force control method, the novel force control method with a weighted function is proposed. Experimental studies of regulating contact forces for different control algorithms are tested and their performances are compared.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.241-245
• /
• 2004

This paper shows the development of remote control system for manipulators which consists of PHANToM Device as a master, Samsung FARA robot as a slave and TCP/IP based LAN for their Communication. This work includes the motion mapping between the master and the slave, Generation of virtual viscosity force preventing operator s unwilled action and 3D remote control simulators for the stable operation of the remote control system, etc. The remote control implementation has been performed and the results shows that the developed system can allow the operator to effectively control the manipulator.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2015년도 추계학술발표대회
• /
• pp.1819-1821
• /
• 2015

재난구조 로봇은 각종 재난상황에 투입되는 로봇으로써 현재의 로봇에 탑재된 카메라 영상 정보만으로 로봇 주변의 환경을 인식하여 작업을 수행하는 데에는 한계가 있다. 본 논문에서는 카메라 영상에 의한 시각정보 이외에 현장의 로봇과 주변환경의 접촉에 의해 발생하는 반발력을 조작자에게 전달하여 실감형 환경인지가 가능하도록 하는 시스템을 제안하고자 한다. 이를 위해 본 연구에서는 조작자에게 다양한 형태의 반발력을 전달할 수 있도록 인체 착용형 로봇인 외골격 로봇을 master 로봇으로 사용하였고, 14 자유도를 가지는 slave 로봇을 원격제어 하여 작업물 조작시의 힘 반향이 조작자에게 전달되도록 제어되고 있음을 확인하였다.

• 한국콘텐츠학회논문지
• /
• 제18권7호
• /
• pp.322-329
• /
• 2018

원격제어는 명령을 전달하는 마스터 장치와 원격지에 위치한 로봇을 슬레이브로 간주하는 방식이다. 이러한 원격제어의 경우, 양 에이전트 간의 동특성, 전송속도 차이에 의해 가상환경을 이용한 가상 슬레이브를 통해 조작자가 원격제어의 특수성을 선행 수행하는 것이 일반적이다. 기존의 가상 슬레이브는 연산량의 한계에 의해 동역학적 효과를 제거한 그래픽 모델로 구성하는 것이 일반적이나 이는 원격지 로봇의 동특성이 무시되어 실제 원격제어시의 실재감을 살리기 어렵다. 본 논문에서는 로봇의 정동역학 모델을 이용하여 이를 원격제어에 활용하고, 가상 환경에서 상대적으로 느린 제어 주기에 의해 발생하는 정동역학의 수치오류를 보완하는 보상 기법을 제안하고 이를 실제 환경과의 원격제어와 비교하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.838-843
• /
• 1991

A telemanipulator that reflects grasping force of the slave gripper to the human operator was implemented in order for manipulation to be more delicate and safe. An industrial robot gripper was used as the slave manipulator. The master manipulator was constructed to make it easy for a human operator to direct the slave and to feel the reflected gripping force. Reflected force was generated by the servomotor of the master. The force signal and position signals of the master and the slave was used to generate driving force signal. Basically position-position type control was used. Miner force feedback is added to improve the performance of the system. Implemented system was tested by colliding two fingers of the slave manipulator, and here switching was used to archive more fast and easy manipulation.

• 한국정밀공학회지
• /
• 제26권9호
• /
• pp.7-13
• /
• 2009

• 로봇학회논문지
• /
• 제16권1호
• /
• pp.64-71
• /
• 2021

This paper describes a robotic teleoperation system to perform an accurate needle insertion into a cornea for a separation between the stromal layer and Descemet's membrane during deep anterior lamellar Keratoplasty (DALK). The system can reduce the hand tremor of a surgeon by scaling the input motion, which is the control input of the slave robot. Moreover, we utilize corneal applanation to estimate the insertion depth. The proposed system was validated by performing the layer separation using 25 porcine eyes. The average depth of needle insertion was 742 ± 39.8 ㎛ while the target insertion depth was 750 ㎛. Tremor error was reduced from 402 ± 248 ㎛ in the master device to 28.5 ± 21.0 ㎛ in the slave robot. The rate of complete success, partial success, and failure were 60, 28, and 12%, respectively. The experimental results showed that the proposed system was able to reduce the hand tremor of surgeons and perform precise needle insertion during DALK.

• 제어로봇시스템학회논문지
• /
• 제2권1호
• /
• pp.35-44
• /
• 1996

A design method for a teleoperator robot system is presented in this paper. The control system consists of two phases; approach phase and contact one. The end-effector position of the estimated slave robot and the contact force between the end-effector and wall are displayed on the monitors at control site, using which the operator controls the teleoperator system. The approach phase controller is designed using Smith's principle and the contact one designed based upon the structured singular value ${\mu}$ in order to increase the robustness of the system. The uncertainatices such as communication time delay and the variations of system parameters are considered as a muliplicative pertubation. Computer simulations are conducted in order to evaluate the performance of the proposed design method. It is found that desirable control performance, especially in the contact phase, is obtained if the control mode is switched into contact phase when the estimated position of the slave robot end-effector is in front of the wall.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.132-135
• /
• 2000

The development of a robot system being able to work instead of human in the hazardous environment have been conducted for many year. In this study, the new design of controllers for the Master-Slave system is discussed. The Master-Slave system, force, velocity and torque signals are communicated between a master and a slave system. the conventional requires the enhancement of characteristics of tactility for minute force, precision signals and mechanical abrasion of loader. It is possible b controlling the viscosity of ERF(Electro-rheological fluid) since it varies with the electric field. Design of controller as well comparison between numerical simulation and experiments as will be presented. Futhermore, current methodology is also applicable to design of tele-surgery

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국제학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.951-957
• /
• 1988

A collision-free trajectory planning algorithm is proposed to optimally coordinate two robots working in a common 3-D workspace. Each link of the two robots is modeled as a line segment and by their motion priority, one of the two robots is chosen as the master and the other the slave. And the one-step-ahead minimum distance between the two robots is computed by moving the master to the next location on its specified trajectory. Then the nominal trajectory of the slave is modified such that the distance between the next locations of the master and the slave must be larger than a prespecified allowable minimum distance. Here the weighted sum of the trajectory error and the joint motions of the slave is minimized by using the linear programming technique under the constraints that joint angle and velocity limits are not violated. To show the validity of the proposed algorithm, a numerical example is illustrated by employing a two dof's and a three dof's planar robots.