• 한국해안·해양공학회논문집
• /
• 제28권1호
• /
• pp.7-12
• /
• 2016

본 연구에서는 선박충돌로부터 교량을 방호하는 파일형 선박충돌방호공과 충돌선박의 간이충돌모델을 개발하고 이를 검증하였다. 선박은 선수의 비선형반력을 고려하여 모델링하였다. 충돌방호공의 모델은 파일에서 상부슬래브의 하단과 지중에 2개의 소성힌지가 발생하는 것으로 구성하였다. 충돌중 발생하는 운동에너지와 위치에너지 및 변형에너지를 고려하여 운동방정식을 유도하고 이를 해석하는 시스템을 개발하였다. 선박과 구조물에 대한 정밀 충돌해석을 수행하여 개발된 간이모델이 충돌거동을 정확히 모사할 수 있음을 보였다.

• Ocean Systems Engineering
• /
• 제3권1호
• /
• pp.35-53
• /
• 2013

In this study, a hybrid floating structure with cylinder was introduced to reduce the hydrodynamic motions of the pontoon type. The hybrid floating structure is composed of cylinders and semi-opened side sections to penetrate the wave impact energy. In order to exactly investigate the hydrodynamic motions and structural behavior of the hybrid floating structure under the wave loadings, integrated analysis of hydrodynamic and structural behavior were carried out on the hybrid floating structure. Firstly, the hydrodynamic analyses were performed on the hybrid and pontoon models. Then, the wave-induced hydrodynamic pressures resulting from hydrodynamic analysis were directly mapped to the structural analysis model. And, finally, the structural analyses were carried out on the hybrid and pontoon models. As a result of this study, it was learned that the hybrid model of this study was showed to have more favorable hydrodynamic motions than the pontoon model. The surge motion was indicated even smaller motion at all over wave periods from 4.0 to 10.0 sec, and the heave and pitch motions indicated smaller motions beyond its wave period of 6.5 sec. However, the hybrid model was shown more unfavorable structural behavior than the pontoon model. High concentrated stress occurred at the bottom slab of the bow and stern part where the cylinder wall was connected to the bottom slab. Also, the hybrid model behaved with the elastic body motion due to weak stiffness of floating body and caused a large stress variation at the pure slab section between the cylinder walls. Hence, in order to overcome these problems, some alternatives which could be easily obtained from the simple modification of structural details were proposed.

• Steel and Composite Structures
• /
• 제39권3호
• /
• pp.261-274
• /
• 2021

In a railway bridge, the CRTS II slab ballastless track is subjected to interlayer connection failures, such as void under slab, mortar debonding, and fastener fracture. This study investigates the influences of interlayer connection failure on the safe operation of high-speed trains. First, a train-track-bridge coupled vibration model and a bridge-track deformation model are established to study the running safety of a train passing a deformed bridge with interlayer connection failure. For each type of the interlayer connection failure, the effects of the failure locations and ranges on the track irregularity are studied using the deformation model. Under additional bridge deformation, the effects of interlayer connection failure on the dynamic responses of the train are investigated by using the track irregularity as the excitation to the vibration model. Finally, parametric studies are conducted to determine the thresholds of additional bridge deformations considering interlayer connection failure. Results show that the interlayer connection failure significantly affects the running safety of high-speed train and must be considered in determining the safety thresholds of additional bridge deformation in the asset management of high-speed railway bridges.

• 한국환경과학회지
• /
• 제16권3호
• /
• pp.261-267
• /
• 2007

In this study, the Slab Ocean Model (SOM) is coupled with an Atmospheric General Circulation Model (AGCM) which developed in University of Kangnung based on the land surface model of Biosphere-Atmosphere Transfer Scheme (BATS). The purposes of this study are to understand radiative role of clouds considering of the atmospheric feedback, and to compare the Clouds Radiative Forcing (CRF) come from the analyses using the clear-cloud sky method and CGCM. The new CGCM was integrated by using two sets of the clouds with radiative role (EXP-A) and without radiative role (EXP-B). Clouds in this two cases show the negative effect $-26.0\;Wm^{-2}$ of difference of radiation budget at top of atmosphere (TOA). The annual global means radiation budget of this simulation at TOA is larger than the estimations ($-17.0 Wm^{-2}$) came from Earth Radiation Budget Experiment (ERBE). The work showed the surface negative effect with $-18.6 Wm^{-2}$ in the two different simulations of CRF. Otherwise, sensible heat flux in the simulation shows a great contribution with positive forcing of $+24.4 Wm^{-2}$. It is found that cooling effect to the surface temperature due to radiative role of clouds is about $7.5^{\circ}C$. From this study it could make an accurate of the different CRF estimation considering either feedback of EXP-B or not EXP-A under clear-sky and cloud-sky conditions respectively at TOA. This result clearly shows its difference of CRF $-11.1 Wm^{-2}$.

• KCI Concrete Journal
• /
• 제12권2호
• /
• pp.55-72
• /
• 2000

This paper proposes a mechanical model to describe the load-deformation responses of the reinforced concrete plate members under service load state. An Analytical method is introduced on the basis of the rotating crack model which considers equilibrium, compatibility conditions, load-strain relationship of cracked member, and constitutive law for materials. The tension stiffening effect in reinforced concrete structures is taken into account by the average tensile stress-strain relationship from the load-strain relationship for the cracked member and the constitutive law for material. The strain compatibility is used to find out the crack direction because the crack direction is an unknown variable in the equilibrium and compatibility conditions. The proposed theory is verified by the numerous experimental data such as the crack direction, moment-steel strain relationship, moment-crack width relationship. The present paper can provide some basis for the provision of the definition of serviceability for plate structures of which reinforcements are deviated from the principal stresses, because the present code defines the serviceability by the deflection, crack control, vibration and fatigue basically for the skeletal members. The proposed theory is applicable to predict the service load state behavior of a variety of reinforced concrete plate structures such as skew slab bridges, the deck of skew girder bridges.

• 한국철도학회논문집
• /
• 제18권3호
• /
• pp.212-222
• /
• 2015

도심 내의 트램 노선 설계 및 건설에서 환경 소음 문제를 해결하기 위해서는 트램 시스템의 소음 방사특성을 파악하여야 한다. 본 논문에서는 트램 시험 차량에 대한 전동 소음 특성을 연구하였으며, 전동 소음 관점에서의 레일 지지 구조의 적절한 강성을 검토하였다. 매립형 궤도와 탄성차륜의 모빌리티를 Timoshenko 보 모델과 유한 요소 모델을 각각 이용하여 구하였고, 측정값과 비교하였다. 선로변 방출 소음도에 대한 계산값을 측정값과 비교한 결과 300Hz 이상의 주파수 대역에서 작은 오차를 내었다. 레일 및 슬라브 지지 강성을 변화시켜가면서 레일 및 차륜의 소음원 강도를 분석하였으며, 지반 진동을 과다하게 유발하지 않으면서 레일 및 차륜으로부터 방사되는 소음이 감소될 수 있는 적정 지지 강성을 검토하였다.

• 한국철도학회논문집
• /
• 제16권3호
• /
• pp.175-182
• /
• 2013

전동 소음은 철도의 주요한 소음 중 하나이며, 차륜과 레일의 음향 조도에 의해 차륜 및 레일이 진동하면서 발생한다. 이러한 전동 소음의 저감 대책을 수립하기 위해서는 관련 인자들의 영향을 파악할 수 있는 예측모델이 필요하다. 본 논문에서는 차륜과 레일의 진동 특성을 이용해 전동 소음을 예측하기 위한 모델링에 관해 다루었다. 슬라브 도상 궤도에 대하여 1단 이산 탄성 지지 구조를 가진 보로 모델링 하였으며, 차륜 진동은 유한요소법을 이용한 수치해석을 적용하였다. 수직 및 수평방향 차륜-레일 집촉력들의 연성은 선형 Hertzian 접촉이론으로 모델링 하였고, 차륜과 레일의 진동 응답을 계산한 후 방사되는 소음을 예측하였다. 예측 모델의 신뢰성을 검증하기 위하여 시험차량에 대해 전동 소음을 측정하였다. 예측치가 측정치와 잘 일치하였으며, 특히 전동 소음이 주요하게 기여하는 200~4000Hz 주파수 대역에서 유사한 경향으로 나타남을 확인하였다.