• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.253-267
• /
• 2003

Inositol and phytic acic extracted from rice bran were investigated for applying cosmetics. Skin lotions containing 0∼3.0wt% inositol and 0∼1.5wt% phytic acid were applied respectively, to the arm skins of 45 Asian women 20'-40's for 7 weeks. Improvement on moisture was evaluated. In addition, improvements on sebum, elasticity, and wrinkle were examined after applying placebo, Inositol and phytic acid-containing skin lotions for face, respectively. For 1.0 wt% inositol resulted in 19% increase of moisture. The wrinkle reduction and elasticity improved 12.4% and 17.0% on average, respectively. Applying 0.5wt% phytic acid resulted in 71.6% increase the moisture. Improvements on wrinkle and elasticity were 15.9% and 21.9% respectively. Applying inositol or phytic acid regardless of dry or oily, resulted in sebum value recovery to that of the normal skin after 2- 4 weeks. Inositol is inferior to phytic acid in improvenients of the skin, and phytic acid is not suitable to sensitive skin. So 0-0.5wt% of phytic acid were added to 1.0wt% inositol and similar experiments were carried out. In case of added 0.1wt% phytic acid, moisture increased 63.8% approximately. Improvements on elasticity and reduction on wrinkle were 17.2% and 17.4%, respectively. Both skin types were turned to normal skin type after 2 weeks. It could improve the skin condition when used inositol added phytic acid. The optimized concentration of phytic acid was 0.10wt% with 1.0wt% of inositol for synergic effect.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.2
• /
• pp.222-227
• /
• 2011

The Aspergillus sp. is well known as a fungus that causes black mold disease and secretes ochratoxin A (OTA). Our study found that infection by this fungus via inoculation onto grapes produced more severe symptom in wounded berries than in fresh berries. Furthermore, OTA contents were higher on the grape skins than in the fleshy portions of the grapes. OTA accumulated during the first 3 days after inoculation, but then gradually decreased. The OTA contents in wine made from 5 kg of grapes which included 400 g of infected grapes ranged from 0.17 to 0.37 ${\mu}g/mL$. An investigation of 25 marketed commercial wines showed the OTA contents were <1.2 ${\mu}g/mL$ which is lower than the limit of 2 ${\mu}g/mL$ established by the Korea Food & Drug Administration.

• Aerospace Engineering and Technology
• /
• v.10 no.2
• /
• pp.114-120
• /
• 2011

Thermal control of satellite is mainly based on passive ways, such as the radiator made of aluminum honeycomb core with aluminum skins and OSR (Optical Solar Reflector). Additionally, for the thermal control of high dissipation unit, the aluminum doubler and heat pipe are utilized. Recently, efforts to find advanced thermal materials have been carried out to enhance heat rejection capability without increasing satellite size, weight and cost. This paper handles the carbon composites have high thermal conductivity with light weigh and have been considered as future thermal control materials to replace aluminum based radiator and doubler. Thermal analysis of satellite panel using APG(Annealed Pyrolytic Graphite) and carbon-carbon composites were performed and temperature contours were compared with the conventional thermal control methods.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.27-35
• /
• 2010

Extracting skin color is significant in adult image detection. However, conventional methods still have essential problems in extracting skin color. That is, colors of human skins are basically not the same because of individual skin difference or difference races. Moreover, skin regions of images may not have identical color due to makeup, different cameras used, etc. Therefore, most of the existing methods use predefined skin color models. To resolve these problems, in this paper, we propose a new adult image detection method that robustly segments skin areas with an input image-adapted skin color distribution model, and verifies if the segmented skin regions contain naked bodies by fusing several representative features through a neural network scheme. Experimental results show that our method outperforms others through various experiments. We expect that the suggested method will be useful in many applications such as face detection and objectionable image filtering.

• Korean Journal of Food Science and Technology
• /
• v.37 no.4
• /
• pp.562-566
• /
• 2005

Effects of amino acids (Arg, Lys, Gly, Ile, Glu, Asp, and Met) on the color intensity, stability and antioxidative properties of anthocyanins extracted from grape skins were investigated. Intensity of anthocyanins was significantly increased by the addition of Asp. Except for basic amino acids such as Arg and Lys, stabilities of anthocyanins were significantly improved by the addition of other amino acids including neutral, acidic and sulfur containing amino acids during the storage at $30^{\circ}C$ at pH 3.5. In case of control anthocyanins was remained unchanged the intensity of red color decreased significantly during the storage whereas their antioxidative activity were unchanged. Although effects of amino acids addition on electron donating abilities of anthocyanins were not differentiated by DPPH (2,2-diphenyl-1-picrylhydrazyl) method, the addition of Asp or Met resulted in increased ferric reducing ability which measured by FRAP (ferric reducing ability of plasma) assay.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.7
• /
• pp.1111-1120
• /
• 2013

Zizania latifola has used for folk medicine in Korea. It is effective in treating skin trouble and sensitivity skins. The purpose of this study was to develop high valuable types of bath preparation of Zizania latifolia. The natural materials were manufactured by the mixed ratio of Zizania latifolia. Product was manufactured by the mixed ratio of Zizania latifolia and 3 natural materials. Green tea was highest in sensory evaluation as similar with Zizania latifolia. optimum condition of mixed ratio was adaptive 50% Houttuynia cordata, 30% green tea with 20% Artemisia vularis. Product's sensory evaluation was showed best in mixing 40% and Zizania latifolia extract 60%. There were optimal condition for manufacturing of cleansing. Therefore, The development of a bath preparation used by Zizania latifolia is very useful for manufacturing cleansing. We suggest that it help for improve skin trouble and make healthy skin.

• Environmental Analysis Health and Toxicology
• /
• v.23 no.4
• /
• pp.315-323
• /
• 2008

In this study, the backs with a hair cut of 6-week-old healthy ICR male mice were once exposed to a dose of $400\;mJ/cm^2$ UVB. An acute dermal inflammation was observed, and the certified 100% pure and natural lavender essential oil were applied to the UVB-exposed mice skin twice a day. It was observed that the mice exposed to UVB resulted in an acute inflammation, and when treated with lavender oil the degree of inflammation was much alleviated, and the inflamed skins of both the control and lavender oil-treatment groups were cured almost completely after 6 days of the UVB exposure. At 24 hours after UVB exposure, the epidermal keratinocytes in the control group showed a cell-membrane damage with the destruction of intercellular junctions, agglutination of tonofilaments within the cytoplasm and nucleus damage, while the lavender oil-treatment group had much less cell damage than the control group. While the control group showed a significant increase (p<0.05) in the activity of XO up to 144 hours, the lavender oil-treatment group did not show any significant increase except for 48 hours after the UVB exposure. Both the control and lavender essential oil-treatment groups had a significant decrease in the activities of CAT and SOD up to 96 hours. Particularly, the CAT activity was significantly lower(p<0.05) in the lavender oil-treatment group than the control group up to 48 hours, and higher than the control group at and after 96 hours. The GST activity was significantly decreased in both the control and lavender oil-treatment groups up to 96 hours after the UVB exposure except for the control group at 24 hours, and that of the lavender oil-treatment group was higher than the control group at and after 96 hours. Therefore, it is assumed that the application of the lavender oil to the ultraviolet-damaged mice skin can be effective in treatment for the damaged skin.

• Journal of Biosystems Engineering
• /
• v.29 no.1
• /
• pp.45-52
• /
• 2004

The chestnut is a well-blown and important forest product in Korea. The annual production of chestnut is about 95,000 tons and its cultivating area is 80,000 ha. However, the peeling process of outer and inner skins of chestnut is very difficult due to hardness and adhesiveness of chestnut skin. The purpose of this study was to develop a prediction model for flame peeling characteristics of domestic chestnuts, and to evaluate an optimization model to determine the operation conditions of the chestnut flame peeling system. The results of this study were summarized as follows. It was found that the flame peeling characteristics of domestic chestnuts were by the flame temperature, and the flame time. The peeling ratio and the heating depth were increased as the flame temperature and the flame time were increased. The peeling ratio and the heating depth were increased linearly when those were less than 85 % and 2 mm respectively. As the hardness of chestnut shell was decreased, the peeling ratio was increased. A simulation model was developed to predict the peeling ratio and the heating depth based on the hardness of the chestnut shell, the flame temperature, and the flame time of the peeling system. The model was evaluated by comparing the measurement and the prediction of the peeling ratios and heating depths, and showed the good relationship.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.6
• /
• pp.586-594
• /
• 2009

This paper is the study on random, sinusoidal and shock vibration responses for the STSAT-3(science and technology satellite-3) proto-model which is the first small size all-composite satellite in Korea. The structure system of the STSAT-3 forms box type structure by joining several hybrid sandwich panels comprised of honeycomb core and carbon fiber reinforced laminated composite skins on both side. Mode shape, stress, displacement and acceleration responses are obtained on both the frequency domain and time domain by means of a commercial FEA software MSC/NASTRAN. From these analysis results, failure, safety factor and design validity are assessed. These results can be successfully applicable as reference data when a new satellite is developed as well as giving out an excellent criteria in satellite vibration treatment design.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.1
• /
• pp.35-42
• /
• 2016

Modern aircraft is facing the increase of power demands and thermal challenges. In accordance with the application of more electric technology and advanced mission requirement, aircraft system requires increase of power generation and it cause increase of internal heat generation. Simultaneously, restrictions have significantly been imposed to the thermal management system. Modern aircraft must maintain low radar observability and infra-red signature. In addition, new composite aircraft skins have reduced the amount of heat that can be rejected to the environment. The combination of these characteristics has increased the challenges faced by thermal management. In order to mitigate the thermal challenges, the concept of system level thermal management should be applied and new modeling and simulation tools need to be developed. To develop and utilize system level thermal management technology, three key points are considered. Firstly, the performance changes of subsystems and components must be assessed at an integrated thermal system. It is because that each subsystem and component interacts with other subsystems or components and it can directly effects on overall system performance. Secondly, system level thermal management requirements and solutions must be evaluated early in conceptual design process as vehicle and propulsion system configuration decisions are being made. Finally, new component level thermal management technologies must focus on reducing heat generation and increasing the availability of heat sinks.