• 한국도로학회논문집
• /
• 제14권4호
• /
• pp.1-8
• /
• 2012

PURPOSES : Skid resistance on pavements plays an important role in reducing the risk of vehicle skidding on wet surface particularly. Almost 9.3 percent of traffic accidents were occurred under rainy condition and these are over-represented in terms of the severity of the crashes. Recently, unusual weather conditions referred widely as the intensified rainfalls justify the need of a systematic management of skid resistance. In this context, the study carried out the observational study on the skid resistance characteristics of different types of pavement with the time passage. METHODS : This study measured the skid resistance with Pavement Friction Tester at three times within five years. The skid resistance measurement has followed the method suggested by ASTM. RESULTS : As the main results under the scope of this study, skid resistance of asphalt concrete has not nearly reduced with time. On the contrary, skid resistance of cement concrete has been rapidly reduced with time though the highest resistance was gained at the early observation. Porous asphalt concrete shows a steady decrease of skid resistance with time, anyway, the reduction rate according to the increase of measurement speeds is relatively lower than the others. CONCLUSIONS : Based on our study, skid resistance of the pavement should be regarded as one of the pavement management system, so periodic measurement should be made to assure road safety as a whole.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 봄 학술발표회 논문집
• /
• pp.216-224
• /
• 1996

Recently, Korea Highway Corporation has attemped to improve the highway safety in accordance with minimizing user's imconveniences. Currently, the Anti Skidding Pavement(ASP) has been introduced as a safety countermeasure on the safety frailty sections. In this study, a series of field evaluations on pavement skid resistance have been conducted on the skid frailty sections to analyze the effects and problems of the Anti Skidding Pavement (ASP), and to understand the behavior of pavement skid resistance due to pavement type, section characteristics, vehicles' speed and traffec volume. Test results show the Anti Skidding Pavement (ASP) has the effects to induce vehicles' speed reduction. However, there are no effects to increase skid resistance. According to these results, it is demanded to improve the applying method of current Anti Skidding Pavement (ASP) to devise an effective safety countermeasure for pavement skid, and to increase pavement skid resistance.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권6호
• /
• pp.79-85
• /
• 2023

미끄럼방지포장은 도로의 부속물로서 도로 및 교통 특성으로 인해 미끄럼저항을 충분히 확보하지 못한 곳이나 도로선형의 변화가 심한 구간에서 포장의 미끄럼저항을 높여 자동차의 안전한 주행을 도모하기 위한 시설이라고 명시하고 있다. 특히, 눈, 비, 블랙아이스와 같은 기상 악천후 상황에서 미끄럼방지포장의 미끄럼저항성능은 도로교통 및 운전자의 안전에 큰 영향을 미친다. 하지만 현재 미끄럼저항성능을 측정하는 데 주로 사용되는 BPN은 시험 면적이 0.009 m²에 불과하여 전체 포장면에 대한 대표성을 나타내기 어렵기 때문에 미끄럼방지포장 유지관리를 위한 신뢰성 있는 미끄럼저항성능 평가방법이 필요한 실정이다. 본 연구에서는 지침 및 표준 조사를 통하여 BPN, SN, GN 시험의 미끄럼저항 성능평가 방법을 비교하고 현장 미끄럼저항 성능평가에 적용하고자 하였다. 또한, 미끄럼방지포장의 체계적인 유지관리를 위하여 미끄럼방지포장재 미끄럼저항 성능평가 Test-bed 및 실도로 실증 현장에 미끄럼저항성능이 다른 미끄럼방지포장을 설치하여 성능평가방법(BPN, SN, GN)별 미끄럼저항성능을 비교하였다. 실험결과, SN과 GN은 미끄럼저항성능이 비슷한 경향으로 나타났으며, GN은 BPN × 0.01 과 유사하게 도출되었다.

• 한국도로학회논문집
• /
• 제15권6호
• /
• pp.17-23
• /
• 2013

PURPOSES : This study aimed to measure the skid resistance of the sidewalk in order to find out the relationship between different surface types and skid resistance. By using British Pendulum Tester, skid resistance of sidewalk was measured in a wet after snow-melt, sludgy, and snowy conditions. METHODS : The skid resistance was measured on surfaces including Concrete Interlocking Block Paving, Colour Asphalt Pavement, Granite Block Paving, Manhole, and Tactile Paving for Visually Impaired. Five trials at each measurement were made, and the average and standard deviation were derived. RESULTS : The skid resistance measured in wet after snow-melt, sludgy, and snowy conditions for the various surface types are summarized and compared. Reduction rates of skid resistance of sludgy and snowy against wet after snow-melt are also analysed. The skid resistance variation between measurement points which mimic pedestrian route in study site are analysed to check out the consistency of the skid resistance along the sidewalk. CONCLUSIONS : The study concluded that the skid resistance of sidewalk surfaces varied depending on the surface types and weather conditions. Secondly, reduction rates of skid resistance according to weather changes are varied depending on the surface types, Thirdly, consistency of skid resistance along the pedestrian route is hardly acquired in the study site at least. So, future study on the consistency evaluation for skid resistance along sidewalk is strongly recommended.

• 한국도로학회논문집
• /
• 제6권4호
• /
• pp.35-43
• /
• 2004

미끄럼저항은 자동차의 타이 어 와 포장노면 사이에서 발생하는 미끄러짐을 방지하여 제동거리를 제어하고 주행 안전성을 확보하는데 중요한 역할을 한다. 우천시의 미끄럼저항 감소는 치명적인 교통사고를 유발할 수 있다. 노면위에 남은 토사 및 겨울철 제설재는 미끄럼저항을 감소시킬 수 있는 요소가 될 수 있다. 본 연구에서는 노면상의 잔류하는 이물질이 타이어와 포장노면사이에서 발생하는 미끄럼저항에 미치는 영향을 다양한 콘크리트 노면조직 형태 (횡방향타이닝, 종방향타이닝, 골재노출) 및 노면조직의 마모조건(신설노면, 마모된 노면)에 대하여 검토하였다. 노면상의 이물질로는 모래, 염화칼슘과 자동차에서 발생하는 폐 오일을 사용하였으며 각 경우별로 이물질의 양을 달리하여, 모래의 경우는 입도 및 양을 달리해가며 미끄럼저항에 미치는 영향을 검토하였다.

• 한국재난정보학회 논문집
• /
• 제7권2호
• /
• pp.87-95
• /
• 2011

노면의 미끄럼 저항성은 교통안전과 직결되는 도로 포장의 중요한 특성이다. 특히 우천 시 차량의 미끄러짐에 의한 교통사고를 줄이기 위해서는 도로의 성능 평가 시 반드시 고려해야 할 사항이다. 또한 자동차의 성능이 개선되고 운전자의 연령이 상대적으로 낮아짐으로써 고속주행을 하거나 급제동을 하는 운전 행태가 증가함에 따라 포장의 미끄럼저항성 역시 개선할 필요성이 더욱 증가하게 되었다. 그러므로 교통사고를 줄이기 위해서는 노면의 미끄럼저항성 시험을 통해 포장의 품질을 검증하고 또 향상시켜야 한다. 본 연구에서는 미끄럼 포장의 품질을 검증하기 위한 방법으로 휴대용 미끄럼저항 시험기 및 자동식 미끄럼저항 측정 장비의 측정원리를 분석하여 실제 포장변에 대하여 미끄럼 저항성을 평가하도록 하였다. 일반 밀입도 포장, 배수성 포장, SMA 포장에 실시한 미끄럼 저항성 평가는 배수성 포장과 SMA 포장의 노후화에 따라 일반 밀입도 포장의 미끄럼 저항성이 가장 크게 나타났다.

• 한국도로학회논문집
• /
• 제16권1호
• /
• pp.31-39
• /
• 2014

PURPOSES : Surface treatment material for pavement preventive maintenance should be inspected field applicability. This study(Part II) aimed to checkup coating characteristics and performance analysis using lab and field tests. The hydrophobic - low viscosity filling material for pavement preventive maintenance is presented in Part I, which is a series of companion study. METHODS : Relative comparison between general asphalt mixtures and surface treatment asphalt mixtures are analyzed and measured for the field application such as indirect tensile strength ratio(TSR), abrasion resistance, crack propagation resistance, temperature resistance, coating thickness, permeability resistance and skid resistance in terms of british pendulum number(BPN). RESULTS : It is found that TSR, crack propagation resistance and permeability resistance is increased as against uncoated asphalt specimen. Abrasion resistance and temperature resistance is secured from the initial coating thickness point of view, which is about 0.2~0.3mm. Skid resistance on the surface treatment pavement is satisfied with the BPN criteria of national highway because of exposed aggregate and crack sill induced pavement deterioration and damage cracks. CONCLUSIONS : The hydrophobic - low viscosity surface treatment material for pavement preventive maintenance is validated on field applicability evaluation based on quantitative analysis of coating thickness and performance analysis using lab and field tests.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권2호
• /
• pp.58-65
• /
• 2021

도로의 유지관리 방안으로 미끄럼 방지포장에 대한 시공사례가 급증하고 있다. 패턴 프레임 공법은 도로 표면에 신재료를 추가하는 방식으로 미끄럼 저항 성능향상과 함께 미관을 향상시킬 수 있는 장점을 지니고 있다. 하지만 시공되고 있는 패턴 프레임 공법은 수입산 소재에 의존하고 있으며, 수출규제로 인한 중요소재수급에도 문제를 보이고 있다.. 본 논문에서는 국내형 패턴 프레임 공법 개발을 위하여 사용되는 중요소재를 국산화 하고 개발 공법에 대한 중요지표 성능 검증을 진행하였다. 중요 성능 지표는 언더코팅 소재의 부착강도, 시공 완료된 패턴 프레임의 미끄럼 저항 성능이다. 부착강도는 1.4MPa를 목표로 진행하였으며 국산화 대체 소재는 2.35MPa로 목표 성능을 만족하였고, 미끄럼 저항 성능은 40BPN을 목표로 진행하였으며 국산화 대체 소재는 75BPN으로 목표 성능을 만족하였다. 경제성 분석 결과, 국산화 소재의 경우 패턴 프레임 전 공정에 사용되는 재료비가 1m² 기준으로 해외 소재 대비 40% 절감되는 것을 확인하였다. 추가적으로 현장 시범 시공 및 관련 지표 모니터링을 통하여 개발 공법을 검증완료 하였다.

• 한국도로학회논문집
• /
• 제19권1호
• /
• pp.53-62
• /
• 2017

PURPOSES : This research was a fundamental study on the application of an integral $TiO_2$ solution to asphalt concrete pavement. The integral $TiO_2$ solution was produced in pilot production equipment; application of the integral $TiO_2$ solution to asphalt pavement was conducted to examine the pollution-reducing capability of photocatalytic compounds such as $TiO_2$. The photocatalytic $TiO_2$ reacted with air pollutants, converting them into small amounts of relatively benign molecules. METHODS : In this study, laboratory experiments were conducted using five various testing methods. Tensile strength ratio (TSR) and British pendulum test (BPT) were conducted in order to evaluate the properties of asphalt pavement subsequent to the integral $TiO_2$ solution coating. In addition, methylene blue testing, a measurement of nitrate on the coated pavement, and nitrogen oxide (NOx) reduction testing were conducted in order to evaluate photocatalytic reaction. Lastly, a UV-A lamp was used as a light source for photocatalytic reactions. RESULTS : Test results indicated no change in the properties of asphalt pavement following the integral $TiO_2$ solution coating. In order to evaluate the performance of asphalt pavement as a function of $TiO_2$, the moisture susceptibility and skid resistance were investigated. The moisture susceptibility and skid resistance satisfied there quirements related to pavement quality and safety specification. Furthermore, the effects of reduction of air pollution were significantly improved as determined via the methylene blue test and NOx reduction test. The $TiO_2$-paved asphalt specimen exhibited approximately 43% reduction of NOx. CONCLUSIONS : This study has suggested that applying $TiO_2$ rarely impacts asphalt pavement performance measures such as moisture susceptibility and skid resistance, and that its application may be a better means of reducing air pollution. Further studies, such as proper $TiO_2$ dosage rates and compatibility with various pavement types, are required to broaden and generalize its application.

• 한국도로학회논문집
• /
• 제17권2호
• /
• pp.89-98
• /
• 2015

PURPOSES : The objective of this study is to evaluate the performance properties of chip seals and fog seals with polymer-modified emulsions. METHODS : The performance of chip seals and fog seals was evaluated on the basis of common issues in surface treatments. Granite aggregate and four types of asphalt emulsions (one of the unmodified and three of the modified emulsions) were used considering the usage in field. A Vialit test was performed to determine the aggregate retention, and the MMLS3 (Third Scale Model Mobile Load Simulator) test was conducted to determine the aggregate retention, bleeding, and rutting. In addition, the fog seal specimens were tested by the BPT (British Pendulum Test) to evaluate skid resistance. RESULTS AND CONCLUSIONS : Overall, the polymer-modified emulsions (PMEs) showed better aggregate retention and bleeding resistance for both chip seals and fog seals. When comparing the performance of the PMEs, the difference was not considerable. In addition, PMEs present significantly better rutting resistance than unmodified emulsions. For skid resistance, if the recommended mix design is applied, the specimens do not cause issues with skid resistance. Although all of the fog seal specimens were over the criteria for skid resistance, the specimen fabricated by the high emulsion application rate (EAR) of the unmodified emulsion was nearly equivalent to the skid value criteria. Therefore, the use of an unmodified emulsion with a high EAR should be carefully applied in the field.