• The korean journal of orthodontics
• /
• v.42 no.1
• /
• pp.23-31
• /
• 2012

Objective: The purpose of this study was to determine the soft tissue thickness of male and female orthodontic patients with different skeletal malocclusions. Methods: Soft tissue thickness measurements were made on lateral cephalometric radiographs of 180 healthy orthodontic patients with different skeletal malocclusions (Class I: 60 subjects, Class II: 60 subjects, Class III: 60 subjects). Ten measurements were analyzed. For statistical evaluation, one-way ANOVA and Kruskal-Wallis tests were performed. Least significant difference (LSD) and Dunnet T3 post hoc tests were used to determine the individual differences. Results: Soft tissue thicknesses were found to be greater for men than for women. Statistically significant differences among the skeletal groups were found in both men and women at the following sites: labrale superius, stomion, and labrale inferius. The thickness at the labrale superius and stomion points in each skeletal type was the greatest in Class III for both men and women. On the other hand, at the labrale inferius point, for both men and women, soft tissue depth was the least in Class III and the greatest in Class II. Conclusions: Soft tissue thickness differences among skeletal malocclusions were observed at the labrale superius, stomion, and labrale inferius sites for both men and women.

• The korean journal of orthodontics
• /
• v.44 no.1
• /
• pp.13-19
• /
• 2014

Objective: The aim of this study was to evaluate long-term changes in the pharyngeal airway dimensions after functional appliance treatment in adolescents with skeletal Class II malocclusions. Methods: Pharyngeal airway dimensions were compared between subjects with skeletal Class II malocclusions (n = 24; mean age: $11.6{\pm}1.29$ years) treated with a Class II bionator and age-matched control subjects with skeletal Class I occlusions (n = 24; mean age: $11.0{\pm}1.21$ years) using a series of lateral cephalograms obtained at the initial visit (T0), after treatment (T1), and at the completion of growth (T2). Results: The length of the nasopharyngeal region was similar between adolescents with skeletal Class I and Class II malocclusions at all time points, while the lengths of the upper and lower oropharyngeal regions and the pharyngeal airway areas were significantly smaller in the skeletal Class II adolescents before treatment when compared to the control adolescents (p < 0.05). However, following treatment with a functional appliance, the skeletal Class II adolescents had increased pharyngeal airway dimensions, which became similar to those of the control subjects. Conclusions: Functional appliance therapy can increase the pharyngeal airway dimensions in growing adolescents with skeletal Class II malocclusions, and this effect is maintained until the completion of growth.

• The korean journal of orthodontics
• /
• v.20 no.1
• /
• pp.157-168
• /
• 1990

This study was undertaken to investigate the interrelationships between the degrees of skeletal maturity of cervical vertebrae and the hand-and-wrist in skeletal Class III malocclusions. In 185 skeletal Class III malocclusions (male 62, female 123) having the lateral cephalogram and hand-wrist radiogram which were taken on the same day, 6 skeletal maturity stages of cervical vertebrae were compared with 11 skeletal maturity indicators of the hand-and-wrist. On the basis of findings of this study, the following results were obtained: 1. The stages of cervical vertebral maturity are one of the methods possible to assess the individual maturity. 2. Mean ages of male and female were obtained in each cervical vertebral stage. 3. Cervical vertebral stages 1 and 2 are considered to the accelerative growth phase, cervical vertebral stages 3 and 4 are corresponded to the peak height velocity, and cervical vertebral stages 5 and 6 were observed to occur during the decelerative phase of growth after peak height velocity in both sexes. 4. In cervical vertebral stages 1, 2, 3, 4, and 5, the degrees of skeletal maturity of cervical vertebrae in males were more retarded than females. 5. There was the high correlation between the degrees of skeletal maturity of cervical vertebrae and hand-and-wrist.

• The korean journal of orthodontics
• /
• v.20 no.1
• /
• pp.123-133
• /
• 1990

The work was undertaken to evaluate the calcification of the second and the third molars in skeletal Class II and III malocclusions. The differences in the calcification stages between skeletal Class II and III malocclusion were evaluated and statistically analysed from panoramic radiographs of 202 males and females ranging in age from 11 to 15 years old. The results were as follows, 1. The calcification stages of the second and the third molars were not different between the skeletal Class II and III malocclusions in each age groups of both sexes. 2. The calcification stages of lower second and third molars of the skeletal Class III malocclusion are more advanced than those of the skeletal Class II malocclusion in male. 3. The clacification stages of upper second and third molars are more advanced than those of lower second and third molars in skeletal Class II malocclusion. 4. The calcification stages of lower second and third molars are more advanced than those of upper second and third molars in skeletal Class III malocclusion.

• Journal of Periodontal and Implant Science
• /
• v.45 no.1
• /
• pp.8-13
• /
• 2015

Purpose: The aim of this study was to evaluate the transfer of different occlusal forces in various skeletal malocclusions using finite element analysis (FEA). Methods: Three representative human cone-beam computed tomography (CBCT) images of three skeletal malocclusions were obtained from the Department of Orthodontics, Yonsei University Dental Hospital, Seoul, South Korea. The CBCT scans were read into the visualization software after separating bones and muscles by uploading the CBCT images into Mimics (Materialise). Two separate three-dimensional (3D) files were exported to visualize the solid morphology of skeletal outlines without considering the inner structures. Individual dental impressions were taken and stone models were scanned with a 3D scanner. These images were integrated and occlusal motions were simulated. Displacement and Von Mises stress were measured at the nodes of the FEA models. The displacement and stress distribution were analyzed. FEA was performed to obtain the 3D deformation of the mandibles under loads of 100, 150, 200, and 225 kg. Results: The distortion in all three skeletal malocclusions was comparable. Greater forces resulted in observing more distortion in FEA. Conclusions: Further studies are warranted to fully evaluate the impact of skeletal malocclusion on masticatory performance using information on muscle attachment and 3D temporomandibular joint movements.

• The korean journal of orthodontics
• /
• v.17 no.1
• /
• pp.107-117
• /
• 1987

The study was designed to examinate the discrimination rate of 4 antero-posterior cephalometric measurements from Angle's malocclusion groups. The material was 246 cephalometric radiographs taken from 42 Normal occlusions, 83 Class I malocclusions, 64Class II Division I malocclusions, 57Class III malocclusions. ANB angle, APDI, AB/OP angle, and Wits appraisal as measurements of antero-posterior skeletal relationship were measured on the cephalometric radiographs and statistically analyzed by the Canonical Discriminant Function. The results of this study were as follows: 1. ANB angle, APDI, AB/OP angle, and Wits appraisal were clinically useful measurements for the evaluation of the antero-posterior skeletal relationship. 2. The rates that discriminate actual malocclusion groups were $77.45\%$ in Wits appraisal, $74.02\%$ in AB/OP angle, $71.08\%$ in ANB angle, and $70.59\%$ in APDI. 3. The discrimination rate of actual Class III malocclusion show above $93\%$, but actual Class I and Class II division I malocclusions were relatively low.

• 대한치과교정학회:학술대회논문집
• /
• 1999.11a
• /
• pp.61.2-62
• /
• 1999

• The korean journal of orthodontics
• /
• v.50 no.2
• /
• pp.98-107
• /
• 2020

Objective: The aim of this study was to compare posterior tooth inclinations, occlusal force, and contact area of adults with different sagittal malocclusions. Methods: Transverse skeletal parameters and posterior tooth inclinations were evaluated using cone beam computed tomography images, and occlusal force as well as contact area were assessed using pressure-sensitive films in 124 normodivergent adults. A linear mixed model was used to cluster posterior teeth into maxillary premolar, maxillary molar, mandibular premolar, and mandibular molar groups. Differences among Class I, II, and III groups were compared using an analysis of variance test and least significant difference post-hoc test. Correlations of posterior dental inclinations to occlusal function were analyzed using Pearson's correlation analysis. Results: In male subjects, maxillary premolars and molars had the smallest inclinations in the Class II group while maxillary molars had the greatest inclinations in the Class III group. In female subjects, maxillary molars had the smallest inclinations in the Class II group, while maxillary premolars and molars had the greatest inclinations in the Class III group. Occlusal force and contact area were not significantly different among Class I, II, and III groups. Conclusions: Premolar and molar inclinations showed compensatory inclinations to overcome anteroposterior skeletal discrepancy in the Class II and III groups; however, their occlusal force and contact area were similar to those of Class I group. In subjects with normodivergent facial patterns, although posterior tooth inclinations may vary, difference in occlusal function may be clinically insignificant in adults with Class I, II, and III malocclusions.

• The korean journal of orthodontics
• /
• v.51 no.6
• /
• pp.407-418
• /
• 2021

Objective: To investigate differences in the heritability of skeletodental characteristics between twin pairs with skeletal Class I and Class II malocclusions. Methods: Forty Korean adult twin pairs were divided into Class I (C-I) group (0° ≤ angle between point A, nasion, and point B [ANB]) ≤ 4°; mean age, 40.7 years) and Class II (C-II) group (ANB > 4°; mean age, 43.0 years). Each group comprised 14 monozygotic and 6 dizygotic twin pairs. Thirty-three cephalometric variables were measured using lateral cephalograms and were categorized as the anteroposterior, vertical, dental, mandible, and cranial base characteristics. The ACE model was used to calculate heritability (A > 0.7, high heritability). Thereafter, principal component analysis (PCA) was performed. Results: Twin pairs in C-I group exhibited high heritability values in the facial anteroposterior characteristics, inclination of the maxillary and mandibular incisors, mandibular body length, and cranial base angles. Twin pairs in C-II group showed high heritability values in vertical facial height, ramus height, effective mandibular length, and cranial base length. PCA extracted eight components with 88.3% in the C-I group and seven components with 91.0% cumulative explanation in the C-II group. Conclusions: Differences in the heritability of skeletodental characteristics between twin pairs with skeletal Class I and II malocclusions might provide valuable information for growth prediction and treatment planning.

• The korean journal of orthodontics
• /
• v.15 no.2
• /
• pp.279-289
• /
• 1985

This study was undertaken to find out the factor highly correlated to the depth of overbite among the skeletal factors of the craniofacial complex using lateral roentgenocephalograms. The subjects cconsited of fifty normal occlusions, sixty Class I malocclusions, sixty Class II division I malocclustions and sixty Class III malocclusions. The results were as follows: 1. Ans-Go-Me angle and lower genial angle showed high correlation to the depth of overbite in the total malocclusion sample. 2. The mean values of Ans-Go-Me angle and lower goinal angle for the normal sample were $49.8^{\circ}\;and\;75.6^{\circ}$, respectively. 3. Ans-Go-Me angle above $56^{\circ}$ or lower gonial angle above $84^{\circ}$ indicated a tendency toward an openbite. Conversely, Ans-Go-Me angle below $48^{\circ}$ or lower goinal angle below $73^{\circ}$ indicated a tendency toward a deepbite.