In workplace design, an ergonomic solution should ensure low postural stress in the operator during his/her work. Stress caused by awkward working postures of the trunk, shoulders and legs can result in fatigue, discomfort, musculo-skeletal disorders and nerve entrapment syndromes. Since discomfort and musculo-skeletal disorders are both related to exposure to biomechanical load on the musculo-skeletal system, minimization of discomfort will contribute to reduction of the risk for musculo-skeletal disorders as well. Therefore, in this study, perceived discomfort on the human body joints was measured in the standing postures using the magnitude estimation in order to have a standardized numerical scale for joint discomfort. Nine healthy graduate students participated voluntarily in the laboratory study. The results revealed that perceived discomfort of all the joints increased as the joints deviated from neutral position. Especially, it showed drastic increment on perceived discomfort when deviation from neutral position in each human body joint increased from 75% to 100%. in terms of relative range of motion(R0M). On the basis of these experimental results, a preliminary ranking for assessment of stressfulness of non-neutral postures around the human body joints was suggested.
This paper presents an experimental study to assess the effectiveness of using ferrocement to strengthen deficient beam-column joints. Ferrocement is proposed to protect the joint region through replacing concrete cover. Six exterior beam-column joints, including two control specimens and four strengthened specimens, are prepared and tested under constant axial load and quasi-static cyclic loading. Two levels of axial load on column (0.2fc'Ag and 0.4fc'Ag) and two types of skeletal reinforcements in ferrocement (grid reinforcements and diagonal reinforcements) are considered as test variables. Experimental results have indicated that ferrocement as a composite material can enhance the seismic performance of deficient beam-column joints in terms of peak horizontal load, energy dissipation, stiffness and joint shear strength. Shear distortions within the joints are significantly reduced for the strengthened specimens. High axial load (0.4fc'Ag) has a detrimental effect on peak horizontal load for both control and ferrocement-strengthened specimens. Specimens strengthened by ferrocement with two types of skeletal reinforcements perform similarly. Finally, a method is proposed to predict shear strength of beam-column joints strengthened by ferrocement.
Eberhard Haug;Alain Tramecon;J. C. Allain;Park, Hyung-Yun
Journal of Mechanical Science and Technology
/
v.15
no.7
/
pp.982-994
/
2001
Commercially available software packages permit to position human models of various geometries in practical scenarios while respecting the anatomical constraints of the skeletal joints and of the bulk of the bodies. Beyond such features, the PAM-Comfort(sup)TM software has been conceived to provide direct access to the muscular forces needed by humans to perform physical actions where muscle force is required. The PAM-Comfort(sup)TM human models are made of multi-body linked anatomical skeletons, equipped with finite elements of the relevant skeletal muscles. The hyper-static problem of determination of muscle forces is solved by optimisation technique. Voluntary stiffening of muscles can be added to the basic contraction levels needed to perform a specific task. The calculated muscle forces obey Hills model. The model and software have been applied in several interesting scenarios of various fields of application, such as car industry, handling of equipment and sports activities.
Purpose : To investigate the differences between the position of the mandibular condyles in temporomandibular joints of patients presenting with normal occlusion and skeletal class III malocclusion. Materials and Methods: Forty-two subjects with normal occlusion and thirty-seven subjects exhibiting skeletal class III malocclusion prior to orthodontic treatment were included in the study. Transcranial radiographs of each subject were taken at centric occlusion and 1 inch mouth opening. The positional relationship between the mandibular condyles with articular fossae and articular eminences at two positional states were evaluated and analyzed statistically. Results: The mandibular condyles of the skeletal class III malocclusion group were found to be located more anteriorly from the center of the articular fossae compared to the normal occlusion group in centric occlusion. The mandibular condyles of the skeletal Class III malocclusion group were located more superiorly from the middle of articular height than those of the normal occlusion group in centric occlusion. However, these differences were not statistically significant. At 1 inch mouth opening, the mandibular condyles of the skeletal class III malocclusion group were placed more posteriorly from the articular eminences than those of the normal occlusion group. The mean angle of the articular eminence posterior slope were 56.51 ° ± 6.29° in the normal occlusion group and 60.37° ± 6.26° in the skeletal Class III malocclusion group. Conclusions: The mandibular condyles of the skeletal Class III malocclusion group were placed more anteriorly at centric occlusion and more posteriorly at 1 inch mouth opening when compared with those of the normal occlusion group.
Journal of mucopolysaccharidosis and rare diseases
/
v.2
no.1
/
pp.5-7
/
2016
Mucolipidoses II and III alpha/beta (ML II and ML III) are lysosomal disorders in which the essential mannose-6-phosphate recognition marker is not synthesized onto lysosomal hydrolases and other glycoproteins. The disorders are caused by mutations in GNPTAB, which encodes two of three subunits of the heterohexameric enzyme, N-acetylglucosamine-1-phosphotransferase ML II, recognizable at birth, often causes intrauterine growth impairment and sometimes the prenatal "Pacman" dysplasia. The main postnatal manifestations of ML II include gradual coarsening of neonatally evident craniofacial features, early cessation of statural growth and neuromotor development, dysostosis multiplex and major morbidity by hardening of soft connective tissue about the joints and in the cardiac valves. Fatal outcome occurs often before or in early childhood. ML III with clinical onset rarely detectable before three years of age, progresses slowly with gradual coarsening of the facial features, growth deficiency, dysostosis multiplex, restriction of movement in all joints before or from adolescence, painful gait impairment by prominent hip disease. Cognitive handicap remains minor or absent even in the adult, often wheelchair-bound patient with variable though significantly reduced life expectancy. As yet, there is no cure for individuals affected by these diseases. So, clinical manifestations and conservative treatment is important. This review aimed to highlight the extra-skeletal clinical problems in ML II and III.
Kniest syndrome (OMIM #156550) is a rare autosomal dominant disorder caused by a dysfunction of type II collagen, which is encoded by the COL2A1 gene (OMIM +120140) mapped to chromosome 12q13.11. Type II collagen, a molecule found mostly in the cartilage and vitreous tissues, is essential for the normal development of bones and other connective tissues. Kniest syndrome is a type II collagenopathy that presents as skeletal abnormality associated with disproportionate dwarfism, kyphoscoliosis, enlarged joints, visual loss, hearing loss, and cleft palate. This report describes a Korean patient with Kniest syndrome who was diagnosed with typical clinical features and radiologic findings. The patient presented with disproportionately short stature and kyphoscoliosis from birth. A skeletal survey revealed fused lamina in the thoracic spine, hemivertebrae, flexion deformities in multiple joints, and plagiocephaly.
Journal of Korean Institute of Industrial Engineers
/
v.23
no.4
/
pp.779-791
/
1997
The purpose of this study is to measure a perceived joint discomfort in the seated and standing position, and to provide ranking systems of perceived joint discomfort. Nineteen mole subjects with no history of musculo-skeletal disorders participated in the experiment. Their physical characteristics were: age $-25.4{\pm}2.7$years, stature $-171.9{\pm}6.0cm$, and body weight $-67.1{\pm}7.0kg$. The results showed that the perceived joint discomforts were different depending upon the joints involved in motion and their movement directions (degree of freedom of motions), which implied that the human body motions and their degrees of freedom should be classified into several distinct classes that need to be assigned different weights of postural stress. Therefore, three ranking systems based on the perceived joint discomforts were suggested, which were classified by the degree of freedom of motions and joints, by only degree of freedom motions, and by joints involved in motion, respectively. In the seated position, the hip movement was the most stressful, the bock was the second, and the shoulder was the third. Likewise, in the standing postures, the hip was the most, the bock was the second, and the ankle was the third. It was expected that these joint motion ranking systems could be used by practitioners of health and safety to improve the comfort of working postures in industry.
Objective: To compare condylar position and morphology among different vertical skeletal patterns. Methods: Diagnostic cone-beam computed tomography images of 60 adult patients (120 temporomandibular joints) who visited the orthodontic clinic of Hallym University Sacred Heart Hospital were reviewed. The subjects were divided into three equal groups according to the mandibular plane angle: hypodivergent, normodivergent, and hyperdivergent groups. Morphology of the condyle and mandibular fossa and condylar position were compared among the groups. Results: The hypodivergent and hyperdivergent groups showed significant differences in superior joint spaces, antero-posterior condyle width, medio-lateral condyle width, condyle head angle, and condylar shapes. Conclusions: Condylar position and morphology vary according to vertical facial morphology. This relationship should be considered for predicting and establishing a proper treatment plan for temporomandibular diseases during orthodontic treatment.
Human activity recognition in real time is a challenging task. Recently, a plethora of studies has been proposed using deep learning architectures. The implementation of these architectures requires the high computing power of the machine and a massive database. However, handcrafted features-based machine learning models need less computing power and very accurate where features are effectively extracted. In this study, we propose a handcrafted model based on three-dimensional sequential skeleton data. The human body skeleton movement over a frame is computed through joint positions in a frame. The joints of these skeletal frames are projected into two-dimensional space, forming a "movement polygon." These polygons are further transformed into a one-dimensional space by computing amplitudes at different angles from the centroid of polygons. The feature vector is formed by the sampling of these amplitudes at different angles. The performance of the algorithm is evaluated using a support vector machine on four public datasets: MSR Action3D, Berkeley MHAD, TST Fall Detection, and NTU-RGB+D, and the highest accuracies achieved on these datasets are 94.13%, 93.34%, 95.7%, and 86.8%, respectively. These accuracies are compared with similar state-of-the-art and show superior performance.
Osteoarthritis (OA), one of the most common skeletal disorders characterized by cartilage degradation and osteophyte formation in joints, is induced by accumulated mechanical stress; however, little is known about the underlying molecular mechanism. Several experimental OA models in mice by producing instability in the knee joints have been developed to apply approaches from mouse genetics. Although proteinases like matrix metalloproteinases and aggrecanases have now been proven to be the principal initiators of OA progression, clinical trials of proteinase inhibitors have not been successful for the treatment, turning the interest of researchers to the upstream signals of proteinase induction. These signals include undegraded and fragmented matrix proteins like type II collagen or fibronection that affects chondrocytes through distinct receptors. Another signal is proinflammatory factors that are produced by chondrocytes and synovial cells; however, recent studies that used mouse OA models in knockout mice did not support that these factors have a role in the central contribution to OA development. Our mouse genetic approaches found that the induction of a transcriptional activator Runx2 in chondrocytes under mechanical stress contributes to the pathogenesis of OA through chondrocyte hypertrophy. In addition, chondrocyte apoptosis has recently been identified as being involved in OA progression. We hereby propose that these endochondral ossification signals may be important for the OA progression, suggesting that the related molecules can clinically be therapeutic targets of this disease.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.