• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.29-30
• /
• 2013

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.321-326
• /
• 1995

The present study provides some experimental observations on the structural developments of bubbly flow and the void wave damping in vertical, circular channel with a large diameter, and discusses the channel size effect on them. It is observed that the developing mode of bubbly flow structures and its transition mechanism are influenced by the channel size as well as the bubble size, and that they are well revealed in the behavior of wave damping.

• Carbon letters
• /
• v.4 no.2
• /
• pp.79-85
• /
• 2003

MCMB (mesocarbon microbeads) has been synthesized from coal tar pitch, petroleum pitch and polymer compound generally. But yield of MCMB was low about 20~40 wt% and was not above 50 wt%. Neither MCMB was replaced with natural graphite because of economic performance, refining MCMB, and control of the particle size distribution. This study was performed to elevate yield of MCMB and to develop technique of particle size distribution. As the result, yield of MCMB that was synthesized from coal tar pitch increased more than 60 wt% about raw material and particle size of MCMB was restrained according to control of QI (quinoline insoluble) ingredient in raw pitch, heat treatment temperature and time.

• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.228-231
• /
• 2006

In this paper, requirements of Meteorological Administration about Meteorological Imager (MI) of Communications, Ocean and Meteorological Satellite (COMS) is analyzed for the design of COMS ground station and according to the analysis results, the distribution image size of each observation area suitable for satellite Field Of View (FOV) stated at the requirements of meteorological administration is determined and the precise satellite FOV and the size of distribution image is calculated on the basis of the image size of the determined observation area. The results in this paper were applied to the detailed design for COMS ground station and also are expected to be used for the future observation scheduling and the scheduling of distribution of user data.

• Progress in Superconductivity
• /
• v.6 no.2
• /
• pp.124-128
• /
• 2005

Homogeneous and fine powders for Bi-2223 tape were prepared by ultrasonic spray pyrolysis (SP) method from an aqueous solution of metal nitrates. Bi-2223 precursor powders were synthesized with various solutes concentration and pyrolysis temperature. The synthesized precursor powders had a narrow particle size distribution and an average particle size was $\~{\cal}um$. The reactivity of precursor powder by SP method is very high, attributed to the fine and narrow particle size distribution. Bi-2223/Ag tape was prepared using PIT method and followed by various sintering conditions. The precursor powder by SP method promoted a very quick formation of the Bi-2223 phase for short sintering time while the secondary phase such as large AEC phase and $Ca_2PbO_4$ were minimized for SP tapes.

• Korean Membrane Journal
• /
• v.7 no.1
• /
• pp.42-50
• /
• 2005

Among ceramic membranes developed to date, amorphous silica membranes are attractive for gas separation at elevated temperatures. Most of the silica membranes can be formed on a porous support by sol-gel or chemical vapor deposition (CVD) process. To improve gas permselectivity of the membrane, well-controlled pores having desired size and chemical affinity between permeates and membrane become important factors in the preparation of membranes. In this article, we review the literature and introduce our technologies on the microstructure to be solved and pore size control of silica membranes using sol-gel and CVD methods.

• Korean Journal of Materials Research
• /
• v.13 no.12
• /
• pp.806-811
• /
• 2003

Ultrafine TaC powders were synthesised by spray drying using tantalum oxalate solution. The spray dried powders were spherical shape and less than 30 $\mu\textrm{m}$ in size. The powders calcined at 500 and X$700^{\circ}C$ showed amorphous structures and $Ta_2$$O_{5}$ phase was obtained by calcining at $700^{\circ}C$. The particle size and shape remains constant after calcination. The calcined spherical powders were composed of an agglomerate of primary particles under 50 nm in size. The complete formation of TaC could be achieved by heat treatment at $1050^{\circ}C$ for 6 hrs. The observed size of TaC powders by TEM was less than 200 nm.

• Journal of Powder Materials
• /
• v.13 no.6 s.59
• /
• pp.427-431
• /
• 2006

Mg-4.3Zn-0.7Y (at%) alloy powders were prepared using an industrial scale gas atomizer, followed by warm extrusion. The powders were almost spherical in shape. The microstructure of atomized powders and those extruded bars was examined using Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscope (EDS) and X-ray Diffractometer (XRD). The grain size of the powders was coarsen as the initial powder size increased. After the extrusion, the grain size became fine due to the severe plastic deformation during the extrusion with the ratio of 10:1. Both the ultimate strength and elongation were enhanced with the decrease of initial particle size.

• Journal of the Korea Furniture Society
• /
• v.17 no.3
• /
• pp.23-28
• /
• 2006

An experiment was conducted to investigate the pit structure of four kind of pine wood species grown in Korea. Torus diameter, margo width, margo lattice size, diameter of pit aperture and pit border width were taken under consideration for explaining the pit structure difference among Pinus densiflora, Pinus rigida, Pinus koraiensis and Larix kaempferi. Torus diameter was found highest in Pinus rigida and the lowest in Pinus densiflora. Margo lattice size varied with torus diameter. Wider torus lowered the margo lattice size. Highest margo width was found in Pinus rigida while the lowest one was found in Pinus koraiensis. Pit aperture diameter was found highest in Pinus densiflora and lowest in Pinus koraiensis. In Pinus rigida, pit border was found the highest and the lowest was found in Larix kaempferi. Pit aperture diameter and pit border were increased gradually from pith to bark while there was a decreasing trend in the margo lattice size measuring from the pith to bark.

• Journal of Adhesion and Interface
• /
• v.4 no.1
• /
• pp.35-42
• /
• 2003

Polystyrene nanocapsules containing octadecane as a core material were prepared by miniemulsion polymerization. The morphology and size of the nanocapsules were measured with varying the surfactant concentration, content of initiator, core/shell ratio and content of comonomer. The morphologies of the prepared nanoparticles were examined by a scanning electron microscope, a transmission electron microscope and the core material was confirmed by a differential scanning calorimeter. The particles below 70 nm in diameter were formed at a high surfactant concentration. The size of the nanoparticles was not significantly affected by the initiator content. With increasing the core/shell ratio and polar comonomer content, the particle size and its distribution were increased.