• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.94-101
• /
• 2020

This helps plus-size consumers purchase ready-made clothes and improves fitness by analyzing the upper body shapes of abdomen-obese adult males; in addition, it creates a size system based on each size interval of obesity shapes. The criteria for the 572 male subjects surveyed were over 25 kg/㎡ of the BMI, over 90 cm of waist, and over 0.85 waist hip ratio. The results were as follows. First, the higher the age group, the higher the degree of abdominal obesity in each age group. The degree of obesity decreases age increase; however, was the risk of abdominal obesity increased. Second, Compared to standard body types, the average body size of Abdomen-obese males is significantly larger, especially in the waist area than in the chest area. Third, to propose a size system for abdominal obese adult males, 16 sections with a final 2% rate of appearance were finally adopted as suit-tops size system for abdominal obese adult males by applying a 3 cm dimension gap between each designation as specified in the KS standard. The coverage ratio for the 16 sections was 72.6% and the coverage effienciency was 4.5%. The results of this study can be used in a various clothes; in addition, the activation and segmentation of the plus-size market are also believed to be significant.

• Journal of the Korean Ceramic Society
• /
• v.50 no.1
• /
• pp.31-36
• /
• 2013

${\beta}$-SiC powders were synthesized by a carbothermal reduction process using $SiO_2$-C precursors fabricated by a sol-gel process using phenol resin and TEOS as starting materials for carbon and Si sources, respectively. The C/Si molar ratio was selected as an important parameter for synthesizing SiC powders using a sol-gel process, and the effects of the C/Si molar ratio (1.4-3.0) on the particle size, particle size distribution, and yield of the synthesized ${\beta}$-SiC powders were investigated. It was found that (1) the particle size of the synthesized ${\beta}$-SiC powders decreased with an increase in the C/Si molar ratio in the $SiO_2$-C hybrid precursors, (2) the particle size distribution widened with an increase in the C/Si molar ratio, and (3) the yield of the ${\beta}$-SiC powder production increased with an increase in the C/Si molar ratio.

• Journal of the Korean Society for Heat Treatment
• /
• v.31 no.5
• /
• pp.213-219
• /
• 2018

This study was carried out to investigate the effect of hot forging ratio and solution treatment temperature on the mechanical properties of incoloy 825 alloy. With an increasing of the hot forging ratio, grain size and range of grain size was decreased. With an increasing of the solution treatment temperature after 90% forging, grain size and range of grain size was increased. Cr carbides and Ti nitrides was precipitated at below $900^{\circ}C$ and volume fraction of precipitate was increased with an decreasing of the solution treatment temperature. With an increasing of the hot forging ratio, hardness, tensile strength and elongation, toughness was increased. With an increasing of the solution treatment temperature after 90% forging, hardness and strength was increased, elongation and toughness was decreased by grain refinement. With an increasing of the forging ratio, effect of solution treatment temperature on the hardness, strength and elongation was small, but on the toughness was large.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.459-460
• /
• 2009

• KIEAE Journal
• /
• v.17 no.1
• /
• pp.23-28
• /
• 2017

Purpose: Many design index that are using in planning phase have been developed. The most popular things among them are Window to Wall Ratio and Surface to Volume Ratio. However there are some limits. Window to Wall Ratio cannot consider building size and Surface to Volume Ratio cannot do Window to Wall Ratio. Accordingly, in this paper, the Window to Floor Ratio was proposed that it can be considered both building size and Window to Wall Ratio. And analyzed correlation of energy demand. Method: For the test, 16 modules with the size of $6m{\times}6m{\times}4m$ were used to make 35 models with the same volume. The simulation was conducted to 945 cases using the window-to-wall ratio of 30, 50 and 70 % in three areas such as Seoul, Gwangju and Jeju and three kinds of windows. And IES_VE was used. Result: The findings above show that the Window to Floor Ratio that can be considered both building size and Window area have to become as design index. It was found out that design criteria with SHGC is necessary, not with the thermal performance (U-value). It is needed to additional analysis about residential building and the effect of 24-hours heating and cooling condition. It plans to carry out research to establish design indicators for climatic conditions in the country and building applications.

• Animal cells and systems
• /
• v.4 no.2
• /
• pp.131-140
• /
• 2000

The pattern of variations in cone sex ratio and pollen traits such as pollen number and size was examined for two years in populations of red pines In Korea. We evaluated; (1) the relationship between tree size and cone sex ratio, (2) the relationship between year and cone sex ratio, and (3) the relationship between cone sex ratio and pollen traits. Larger trees in height and circumference at breast height produced more male as well as female cones. However, cone sex ratio was independent of these plant sizes. Across the two populations, both female cone numbers per tree and male cone numbers per new shoot increased 2.2 and 1.2 times, respectively, in 1999 compared to 1998, while the yearly pattern of male cone-bearing shoots per tree differed significantly between populations. Thus, cone sex ratio varied significantly between years in one of the two populations. Pollen traits such as the number of pollen grains and diameter did not vary significantly among populations. Pollen diameter and grain numbers per male cone were significantly negatively correlated with the cone sex ratio in two populations and one population, respectively. Trees which stopped female cone production in the first year and those which produced female cones in both years differed in the cone sex ratio and pollen size in the second year. The long duration of one reproductive episode and the potential of masting in red pines emphasize the need to conduct long-term studies on the dynamics of cone production, cone sex ratio, and simultaneous changes in pollen traits in red pines.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.217-222
• /
• 2004

The aim of this paper is to investigate the effect of micro-dimple size on reduction friction and to understand the potential of friction reduction through micro-scale dimple to fabricate by photolithography on pin-on-disk test using flat-on-flat contact geometry. It was verify that the friction property with respect to the same pitch has been influence on the size of dimple under lubricated sliding contact. Also, we can recognize from Stribeck curve that the friction property has a connection with the size of dimple. It can explain a relationship between the friction coefficient and a dimensionless parameter for lubrication condition. The friction property has been an effect on the size of surface texture on reduction friction, not only because the density of dimple, but also because the ratio of diameter/pitch. This ratio of approximately 0.5 is recommend under the tested friction condition. It suggested that the ratio of d/p is an important parameter for surface texture design.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.5
• /
• pp.36-41
• /
• 1999

Although the problems of defects and nonmetallic inclusion in metal fatigue are very complicated it is particularly important to view these problems from the perspective that defects and inclusions are virtually equivalent to small cracks. This concept will help us to understand various fatigue phenomena caused by graphite of Ductile cast iron. Therefore in this study different ferrite-pearlite matrix structure and pheroidal ratio of graphite of 70%, 80% and 90% GCD40 , GCD45-2 series have been carried out rotary bending fatigue test estimated the maxi-mum size of graphite investigated correlation. It was concluded as follows : (1) in ductile cast iron which have various spheroidal ratio of graphite the fatigue limit C series of 90% spheroidal ratio of graphite is the highest. While A series of 70% spheroidal ratio of graphite is the lowest (2) fatigue limit was predicted by vickers hardness(Hv) of matrix {{{{ SQRT {area } }}}} of maximum size graphite inputting Murakami and Endo's formula.

• Transactions of Materials Processing
• /
• v.19 no.8
• /
• pp.480-485
• /
• 2010

In this work, the closing behavior of cylindrical-shaped voids was experimentally investigated according to various parameters such as reduction ratio in height, initial void size and billet rotation during hot open die forging process. The reduction ratio in height, number of path, and billet rotation were chosen as key process parameters which influence the void closing behavior including the change of void shape and size. On the other hand, values of die overlapping and die width ratio were set to be constant. Void closing behavior was estimated by microscopic observation. Based on the observations, it was confirmed that application of billet rotation is more efficient to eliminate the void with less reduction ratio in height. The experimental results obtained from this study could be helpful to establish the optimum path schedule of open die forging process.

• The Journal of Asian Finance, Economics and Business
• /
• v.9 no.4
• /
• pp.197-212
• /
• 2022

The study uses the audited financial statements of 26 Vietnamese commercial banks listed on the Ho Chi Minh City Stock Exchange (HOSE) and Hanoi Stock Exchange (HOSE) during the 2008-2018 period to estimate the system GMM model, which provides empirical evidence on the effect of the variables of customer deposit to total assets (DEPO) ratio, loan to assets (LTA) ratio, liquidity of commercial banks (LIQ), credit development (CRD) ratio, external funding (EFD) ratio, and credit loss provision (LLP) ratio on liquidity risk. The study confirms that commercial banks' internal factors play the most important role, and there is no empirical evidence on macro variables that affect liquidity risk. Finally, in accordance with the theoretical framework, the study uses an estimation method with the R language and the bootstrap methodology to give empirical proof of the nonlinear correlation and U-shaped graph between commercial bank size and liquidity risk. The importance of commercial bank size in absorbing and moderating the effects of liquidity shocks is demonstrated, however, excessive growth in commercial bank size would increase liquidity risk in commercial bank operations.