• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.3
• /
• pp.149-158
• /
• 2024

Purpose: This study aims to investigate the effects of provisional restoration fabrication methods and surface polishing on surface roughness and microbial adhesion through in vitro experiments. Materials and Methods: 120 cylindrical provisional restoration resin blocks (10 × 10 × 2.5 mm) were manufactured according to four fabrication methods, and 30 specimens were assigned to each group. Afterwards, they were divided into non-polishing group, #400 grit SiC polishing group, and #800 grit SiC polishing group and polished to a 10 × 10 × 2 mm specimen size (n = 10). The surface roughness Ra and Ry of the specimen was measured using a Surface Roughness Tester. Three specimens were extracted from each group and were coated with artificial saliva, and then Streptococcus mutans were cultured on the specimens at 37℃ for 4 hours. The cultured specimens were fixed to fixatives and photographed using a scanning electron microscope. For statistical analysis, the two way of ANOVA was performed for surface roughness Ra and Ry, respectively, and the surface roughness was tested post-mortem with a Scheffe test. Results: The fabrication method and the degree of surface polishing of the provisional restorations had a significant effect on both surface roughness Ra and Ry, and had an interaction effect. There was no significant difference in Ra and Ry values in all polishing groups in DLP and LCD groups. Conclusion: The fabrication method and surface polishing of the provisional restoration had a significant effect on surface roughness and showed different adhesion patterns for S. mutans adhesion.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5A
• /
• pp.407-415
• /
• 2010

In Korea, more than 90% of the total number of steel bridges built for 40~70 m span length is a steel box-girder bridge type. A steel box-girder bridge is suitable for long span or curved bridges with outstanding flexural and torsional rigidity as well as good constructability and safety. However, a steel box-girder bridge is uneconomical, requiring many secondary members and workmanship such as stiffeners and ribs requiring welding attachments to flanges or webs. Therefore, in US and Japan, a plate girder bridge, which is relatively cheap and easy to construct is generally used. One type of the plate girder bridge is the two- or three-main girder plate bridge, which is a composite plate girder bridge that minimizes the number of required main girders by increasing the distance between the adjacent girders. Also, for the simplification of girder section, the stiffener which requires attachment to the web is not required. The two-main steel girder plate bridge is a representative type of plate girder bridges, which is suitable for bridges with 10 m effective width and has been developed in the early 1960s in France. To ensure greater safety of two- or three-main girder plate bridges, a larger steel section is used in the bridge domestically than in Europe or Japan. Also, the total number of two- or three-main girder plate bridge constructed in Korea is significantly less than the steel box girder bridge due to a lack of designers' familiarity with more complex design detailing of the bridge compare to that of a steel box girder bridge design. In this study, a new construction method called Turn Over method is proposed to minimize the steel section size used in a two- or three-main girder plate bridge by applying prestressing force to the member using confining concrete section's weight to reduce construction cost. Also, a full scale 20 m Turn Over girder specimen and a Turn Over girder bridge specimen were tested to evaluate constructability and structural safety of the members constructed using Turn Over process.

• Archives of Plastic Surgery
• /
• v.37 no.5
• /
• pp.547-554
• /
• 2010

Purpose: The purpose of this study is to delineate the optimal time of venous revascularization for preventing the flap necrosis due to venous occlusion, and to clarify the usefulness of tissue oxygen pressure ($TcpO_2$) in the determination of the point of time for venous revascularization. Methods: Thirty-six, $3{\times}3\;cm$ sized epigastric island flap was elevated in left abdomen of male Sprague-Dawley rat weighing 250 gram. Flaps were randomly assigned to six groups of six flaps according to the duration of venous occlusion with microvascular clamp; 10 minutes in the group I as the control, 60 minutes in the group II, 2 hours in the group III, 3 hours in the group IV, 4 hours in the group V, and 6 hours in the group VI, respectively. Just before removal of clamp after flap was reposed in situ, the ratio of $TcpO_2$ (tissue oxygen pressure) of the island flap to that of right abdomen was calculated in each group, and tissue specimen was harvested from the distal area of the flap for histological evaluation of vascular change. Five days later, survival area of the flap was estimated, and evaluated the correlation between the tissue oxygen pressure and the rate of flap survival. Results: The $TcpO_2$ and the survival rate of flap were decreased proportionally with the duration of venous occlusion. The ratio of the $TcpO_2$ of the flap is decreased abruptly to below sixty percentile compared to the $TcpO_2$ of normal tissue, and the survived area of the flap is decreased to nine-tenth of the designed size after three hours of total venous occlusion. Histologically, the number of congested vessels was increased according to venous occluded time, and proportionally increased after 3-hours of occlusion significantly. Conclusion: There is a close correlation between the $TcpO_2$ and the survival rate of flaps according to the duration of venous occlusion. Therefore, the $TcpO_2$ represents the hemodynamic changes within the flap, and thought to be an alternative effective tool in the flap monitoring for venous revascularization.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.2
• /
• pp.249-270
• /
• 1993

For understanding of anatomy, physiology, and diseases of human TMJ, it is required to evaluate quantitatively the movement of the disc and condyle head of mandible. The histologic section of cadaver TMJ were examined, and the magnification of the MR image and its details of anatomy were evaluated. And then a quantitative analytic method, by comparing the Sectograph and the MR image of vital human TMJ, was proposed. For this study, 15 subjects(Male, 24~35years) were selected from a prosthodontic examination randomly, and each subject’s five interocclusal rubber registration records were made on the ICP, and 5, 10, 15, and 20mmjaw opening positions. All subjects were radiographed with a Denar Quint Sectograph Image System(Denar Corp., USA), and imaged with a MRP-20EX MR Image System(0.2T, Permanent Magnet Type, Hitachi Medical Corp., Japan) using an 100mm diameter bilateral type surface coil. These images were traced on the acetate tracing paper, and analyzed In this study, the findings led to the following conclusions. 1. In comparison of the histologic section of autopsy specimen with the MR image at the same section, the size(dimension) of MR image was 70% of the real one. It was possible to recognize the shape of articular disc, anterior and posterior attachments, and adjacent soft tissues, because of the excellent reproducibility of anatomical structure. 2. When we compared the amount of joint space on MR image with that of joint space on sectograph, the amount of joint space on sectograph was significantly greater than that of joint space on MR image, except at the top of condylar head. 3. The position of minimum joint space on sectograph at intercuspal position didn't coincide with the middle position of articular disc on MR image, and was approximately in the anterior third of posterior band of articular disc. 4. The amount of condylar movement on MR image at opening movement was greater than that of articular disc movement. From Intercuspal position to 5mm jaw-opening movement, the condylar movement showed hinge one, and over the range 5mm jaw-opening it suggested hinge & translatory one. 5. In terms of area variation of articular disc measured on MR image in sagittal plane, the area of posterior band increased with increasing the amount of Jaw opening, but the area of anterior band decreased conversely.

• Geomechanics and Engineering
• /
• v.21 no.1
• /
• pp.63-71
• /
• 2020

Strength anisotropy is a typical feature of thin-bedded rock masses and their strength will be degraded subjected to water immersion effect. Such effect is crucial for the operation of hydropower plant because the impoundment lifts the water level of upstream reservoir and causes the rock mass of nearby slopes saturated. So far, researches regarding mechanical property of natural thin-bedded rock masses and their strength variation under water immersion based on field test method are rarely reported. This paper focuses on a thin-bedded stratified rock mass and carries out field test to investigate the mechanical property and strength variation characteristics. The field test is highlighted by samples which have a large shear dimension of 0.5 m*0.5 m, representing a more realistic in-situ situation than small size specimen. The test results confirm the anisotropic nature of the concerned rock mass, whose shear strength of host rocks is significantly larger than that of bedding planes. Further, the comparison of shear strength parameters of the thin-bedded rock mass under natural and saturated conditions show that for both host rocks and bedding planes, the decreasing extent of cohesion values are larger than friction values. The quantitative results are then adopted to analyze the influence of reservoir impoundment of a hydropower plant on the surrounding rock mass stability of diversion tunnels which are located in the nearby slope bank. It is evaluated that after reservoir impoundment, the strength degradation induced incremental deformations of surrounding rock mass of diversion tunnels are small and the stresses in lining structure are acceptable. It is therefore concluded that the influences of impoundment are small and the stability of diversion tunnels can be still achieved. The finings regarding field test method and its results, as well as the numerical evaluation conclusions are hoped to provide references for rock projects with similar concerns.

• Journal of Gastric Cancer
• /
• v.24 no.3
• /
• pp.257-266
• /
• 2024

Purpose: We conducted a randomized prospective trial (KLASS-07 trial) to compare laparoscopy-assisted distal gastrectomy (LADG) and totally laparoscopic distal gastrectomy (TLDG) for gastric cancer. In this interim report, we describe short-term results in terms of morbidity and mortality. Methods and Methods: The sample size was 442 participants. At the time of the interim analysis, 314 patients were enrolled and randomized. After excluding patients who did not undergo planned surgeries, we performed a modified per-protocol analysis of 151 and 145 patients in the LADG and TLDG groups, respectively. Results: The baseline characteristics, including comorbidity status, did not differ between the LADG and TLDG groups. Blood loss was somewhat higher in the LADG group, but statistical significance was not attained (76.76±72.63 vs. 62.91±65.68 mL; P=0.087). Neither the required transfusion level nor the operation or reconstruction time differed between the 2 groups. The mini-laparotomy incision in the LADG group was significantly longer than the extended umbilical incision required for specimen removal in the TLDG group (4.79±0.82 vs. 3.89±0.83 cm; P<0.001). There were no between-group differences in the time to solid food intake, hospital stay, pain score, or complications within 30 days postoperatively. No mortality was observed in either group. Conclusions: Short-term morbidity and mortality rates did not differ between the LADG and TLDG groups. The KLASS-07 trial is currently underway.

• Korean Journal of Veterinary Service
• /
• v.18 no.2
• /
• pp.133-151
• /
• 1995

During 2 years from Octorber 1992 to April 1994, prevalence of general respiratory diseases and atrophic rhinitis in the pig herds located in the Western Chungnam was investigated, and isolation of B. bronchiseptica was attempted for the pigs manifested with the clinical signs of atrophic rhinitis(AR). The isolates were characterized and identified in aspects of biochemical properties, antigenicity, drug sensitivity and pathogenicity. The results obtained through the experiments are summarized as follows; 1. During 2 years of investigation, the overall prevalence of the general respiratory diseases in the pi8 herds in Western Chungnam was 35.3%, consisting of 35.1% in the pig farms and 38.8% in a slaughter house. The prevalence by age groups accounts for 9.2% in adults, 44.7% in rearings and 25.3% in sucklings. By farm size, The highest prevalence of 56.5% was observed in the smallest farm with 1 to 200 heads. 2. The prevalence of clinical cases of artrophic rhinitis was recorded by 12.7% in the group that is the sows and piglets vaccinated, 28.9% in the group that is the sows only vaccinated and 39.8% in the group of the non-vaccinated groups. In the slaughter house, 53(24.8%) of 214 pigs examined exhibit the AR lesions. 3. A total of 189 strains of B. bronchiseptica were isolated from the pig herds. Isolation rates were 12.6% in the group that is the sows and piglets vaccinated, 34.1% in the group that is the sows only vaccinated and 45.7% in the group of the non-vaccinated groups. Isolation rate in the specimen from the slaughter house was 93( 43.5% ) of 214 pigs examined. Of the AR-non-vaccinated group, the piglets aged bet- ween 61 to 90 days revealed the highest isolation rate of 58.5%. 4. The titers of antibody against B. bronchiseptica were measured by tube agglutination test. The group that is the sow and piglet-vaccinated showed the highest titer of 640-2, 560 in sow and 640longrightarrow5, 120 in piglet. The group that is the sows only-vaccinated revealed 640-2, 560 in sows and 640-1, 280 in piglets. Both of the vaccinated groups showed 100% positive reaction. The group of the non-vaccinated sho-wed relatively lower titer of 0-1, 280 in both of sows and piglets. The positive rate of the sera obtained from the slaughter house was 53.3% with the antibody titer of 0-1, 280. 5. Biochemical and serological properities of 189 isolates were very similar to those of the reference B. bronchiseptical phase I type, indicating that most of isolates are B. bronchiseptica phase I type. 6. In antimicrobial drug susceptibility, 87.3% of 189 isolates was susceptible to chloramphenicol, 79.9%, to amikacin, 64.6%, to cephalothin and less than 35.4% to others. 7. In agar-gel immunodiffusion and SDS-PAGE analysis, the isolates presented the identical antigenicity and protein profiles to the reference standard strains. 8. The whole cells and bacterial filtrates of the isolates were inoculated to guinea pigs and mice. The isolates showed the hish pathogenicity and dermonecrotoxiciy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.22 no.1
• /
• pp.51-68
• /
• 1984

The purpose of this study is primarily to test the use value of tooth ash as an alternative material of the synthetic hydroxyapatite. For this purpose the author performed the experimental study to investigate the phsyical properties of sintered tooth ash and its histocompatibility in vitro. The tooth ash was made by incinerating procedure at $650^{\circ}C,\;750^{\circ}C,\;850^{\circ}C,\;950^{\circ}C\;and\;1050^{\circ}C$ respectively. The composition of tooth ash was analyzed and X-ray diffraction was done. The experimental specimens were molded to the cylinderical form 1 cm high, 1 cm in diameter under the pressure of $1000kg/cm^2$, which were divided into two groups; the one is sintered tooth ash at $1100^{\circ}C$ and the other is fired mixture of tooth ash and dental porcelain mixed to the weight ratio of 4:6, 5:5, 6:4 and 7:3. The physical propoerties of the sintered specimens were examined and their microstructure was observed under the Scanning Electron Microscope. The results obtained were as followings: 1. The difference of the tooth ash composition depending on incinerating temperature was of no significance, but the $CO_2$ disappeared from $950^{\circ}C$. 2. X-ray diffraction showed the tooth ash was mainly composed of hydroxyapatite and a small amount of - white lockite. But phase transformation was not disclosed. 3. The microstructure of the sintered specimens of the ashed tooth powder was of no difference in the structure and grain size accompanying the ashed temperature, but sintering ability seemed to be the best in the specimen incinerated at $950^{\circ}C$. 4. There was good wettability in the mixed sintered specimens of the ashed tooth powder and the porcelain powder. 5. The compressive strength of the sintered specimens of the tooth ash incinerated at $950^{\circ}C$ was the highest with $589.75kg/cm^2$ and the porosity and the absorption were the lowest as well. 6. The mixed sintered specimens of the tooth ash and porcelain powder was good in the physical properties in the case of mixed weight ratio of 6:4. 7. The animal fibroblast cultures with porcelain showed increase in the cell number, whereas the tooth ash showed a small degree of growth inhibition. But the difference of cell multiplication efficiency between control cultures and test cultures with tooth ash was not observed.

• Journal of Gastric Cancer
• /
• v.16 no.4
• /
• pp.247-253
• /
• 2016

Purpose: The aim of this study was to establish an anthropometric reference of the stomach for gastric cancer surgery and a modeling formula to predict stomach length. Materials and Methods: Data were retrieved for 851 patients who underwent total gastrectomy at the Seoul National University Hospital between 2008 and 2013. Clinicopathological data and measurements from a formalin-fixed specimen were reviewed. The lengths (cm) of the greater curvature (GC) and lesser curvature (LC) were measured. Anthropometric data of the stomach were compared according to age, body weight, height (cm), and body mass index. To predict stomach length, two multiple regression analyses were performed. Results: The mean lengths of the GC and LC were $22.2{\pm}3.1cm$ and $16.3{\pm}2.6cm$, respectively. The men's GC length was significantly greater than the women's ($22.4{\pm}3.1cm$ vs. $21.2{\pm}2.9cm$, P=0.003). Patients aged >70 years showed significantly longer LC than those aged <50 years ($16.9{\pm}2.9cm$ vs. $15.9{\pm}2.4cm$, P=0.002). Patients with body weights >70 kg showed significantly longer GC than those with body weights <55 kg ($23.0{\pm}2.9cm$ vs. $21.4{\pm}3.2cm$, P<0.001). In the predicted models, 4.11% of the GC was accounted for by age and weight; and 4.94% of the LC, by age, sex, height, and weight. Conclusions: Sex, age, height, and body weight were associated with the length of the LC, while sex and body weight were the only factors that were associated with the length of the GC. However, the prediction model was not sufficiently strong.

• Journal of the Korea Concrete Institute
• /
• v.25 no.1
• /
• pp.99-106
• /
• 2013

Concrete materials subjected to impact by high velocity projectiles exhibit responses that differ from those when they are under static loading. Projectiles generate localized effects characterized by penetration of front, spalling of rear and perforation as well as more widespread crack propagation. The magnitude of damage depends on a variety of factors such as material properties of the projectile, impact velocity, the mass and geometry as well as the material properties of concrete specimen size and thickness, reinforcement materials type and method of the concrete target. In this study, penetration depth of front, spalling thickness of rear and effect of spalling suppression of concrete by fiber reinforcement was evaluated according to compressive strength of concrete. As a result, it was similar to results of the modified NDRC formula and US ACE formula that the more compressive strength is increased, the penetration depth of front is suppressed. On the other hand, the increase in compressive strength of concrete does not affect spalling of rear suppression. Spalling of rear is controlled by the increase of flexural, tensile strength and deformation capacity.