• 한국지역사회생활과학회지
• /
• 제22권1호
• /
• pp.53-61
• /
• 2011

We have made knitwear in a different way from the typical woven pattern; it does not have the dart, even for women's tops. The purpose of this research was to compare the fit and appearance of the torso pattern for circular knitted fabric between virtual try-on garments and real garments. First, a woman in her 20's was scanned by a 3D body scanner, and thus producing a virtual avatar. I prepared knit patterns and created a torso pattern appropriate for circular knitted fabric. Next, I measured the body size of the avatar. The 2D patterns for the torso and sleeves were developed using the Yuka Super ALPHA : Plus. The 3D virtual garments were made from the imported 2D patterns and were then tried on the 3D virtual avatars. Finally, the fit of the real garments and the virtual garments was compared. While the shape of the virtual try-on garments were similar to the real garments, the folding and sagging were different. This study found the length was the same as woven wear. However the actual bust size and the clothing size were the same which is not a typical characteristic of woven wear. In the case of hem measurement, more space was needed than actual body size but less space was needed than in woven patterns.

• 패션비즈니스
• /
• 제10권6호
• /
• pp.122-130
• /
• 2006

The purpose of this study is to develop the appropriate brassiere pattern for women. Total of 6 brands with same design and 75A, 80A size brassieres(total 12 brassieres) were compared and analyzed for pattern, cup size and patterns. SPSS 10.1 statistic process was used for data analysis. The outcom of this study is summarized as follows. Total length of brassiere by grade were performed smaller than the standard difference 5cm. For 1/2 front cover length, There were no significant differences between 75 and 80. The reason for lower line of wing is shorter than upper line of wing is because side support is cut side ways considering lower line of wing is sewn more toward front than upper line of wing. Even it is same A cup size most cup related sizes become larger according to underbust comparing with cup capacity, they range from 146.67cc to 172.83cc for same A cups. Among same A cups with difference underbust there was average of 26.16cc differences. For relations of material, sewing technology and expansion rate, all 6 brands had zigzag type sewing for upper line tape. For every 0.3cm height, there were $17{\sim}21$ stitches. When urethane mixture is similar expansion rate is higher while number of 1 inch zigzag are high. For elasticity, zigzag stitch expand side ways for more expansion.

• Journal of Ecology and Environment
• /
• 제41권8호
• /
• pp.223-234
• /
• 2017

Background: Spatial structure of plants in a population reflects complex interactions of ecological and evolutionary processes. For dioecious plants, differences in reproduction cost between sexes and sizes might affect their spatial distribution. Abiotic heterogeneity may also affect adaptation activities, and result in a unique spatial structure of the population. Thus, we examined sex- and size-related spatial distributions of old-growth forest of dioecious tree Torreya nucifera in extremely heterogeneous Gotjawal terrain of Jeju Island, South Korea. Methods: We generated a database of location, sex, and size (DBH) of T. nucifera trees for each quadrat ($160{\times}300m$) in each of the three sites previously defined (quadrat A, B, C in Site I, II, and III, respectively). T. nucifera trees were categorized into eight groups based on sex (males vs. females), size (small vs. large trees), and sex by size (small vs. large males, and small vs. large females) for spatial point pattern analysis. Univariate and bivariate spatial analyses were conducted. Results: Univariate spatial analysis showed that spatial patterns of T. nucifera trees differed among the three quadrats. In quadrat A, individual trees showed random distribution at all scales regardless of sex and size groups. When assessing univariate patterns for sex by size groups in quadrat B, small males and small females were distributed randomly at all scales whereas large males and large females were clumped. All groups in quadrat C were clustered at short distances but the pattern changed as distance was increased. Bivariate spatial analyses testing the association between sex and size groups showed that spatial segregation occurred only in quadrat C. Males and females were spatially independent at all scales. However, after controlling for size, males and females were spatially separated. Conclusions: Diverse spatial patterns of T. nucifera trees across the three sites within the Torreya Forest imply that adaptive explanations are not sufficient for understanding spatial structure in this old-growth forest. If so, the role of Gotjawal terrain in terms of creating extremely diverse microhabitats and subsequently stochastic processes of survival and mortality of trees, both of which ultimately determine spatial patterns, needs to be further examined.

• 복식
• /
• 제24권
• /
• pp.193-203
• /
• 1995

The objective of this research was to study the optical illusion effect and the difference of image of textile pattern design. This research also tried to show the more useful method to make stimulus by computer simulation and to present quantitative data. For the experiment, 3 design variable were selected from design principal book as follows : size, arrangement and value harmony of motive. Size of motive variable was divided into 3 level so by use of check & dot pattern, arrangement of motive variable was manipulated to vias direction for check pattern and value harmony between motive & base color was classified into similar value harmony and contrasting value harmony. Visual stimuli which same model was wearing each design were created by ENVISION program. This photographs were given to evaluating panels, Then panels compared experiment design by slim effect and evaluated for 5-sementic differential scale expressing clothing image. The results were as follows : 1) There were significant difference is slim effect, clothing image as simplicity and boldness according to size of Motive. 2) Arrangement of motive for check pattern had significant effects on slim , clothing images as activity and attractiveness. 3) Case of low value base color and high value dot color has significant high score on slim effect, activity, attractiveness, boldness and youthful image.

• 한국의류학회지
• /
• 제26권3_4호
• /
• pp.390-401
• /
• 2002

본 연구에서는 기성복의 맞음새와 치수체계에 따른 문제점을 제시하기 위하여 현재 시판되고 있는 여성복 재킷을 중심으로 사이즈별 각 패턴의 치수 및 공극량 분석을 실시하였으며 결과는 다음과 같다. 1. 재킷에 대한 관능검사(self sensory test)결과, 패턴 B의 점수가 가장 낮았으며, 동일한 사이즈의 의복임에도 불구하고 재킷의 착용감은 유의적인 차이가 있는 것으로 나타났다. 2. 패턴 계측 결과 각 브랜드간의 패턴 그레이딩 량은 차이를 나타내어 동일한 사이즈임에도 불구하고 여유량이 서로 다르게 나타났으며, 수직방향보다는 수평방향의 증가량이 큰 것으로 나타났다. 3. 3D scanner를 이용하여 인체 및 착의인체를 스캔한 결과, 3차원 입체 형상으로 의복의 착의상태를 볼수 있으므로 2차원 정보를 얻을수 있는 사진촬영 결과에 비하여 활용성이 높으며 촬영거리에 따른 피사체의 왜곡이 없으므로 정확도가 높은 것으로 나타났다. 4. 패턴별 평균공극길이에 대한 유의성 검증 결과, B88사이즈의 허리부위를 제외한 모든 부위에서 유의성이 인정되지 않았으며 사이즈별 평균공극길이에 대한 유의성 검증결과에서는 품, 배, 엉덩이부위에서 유의성이 인정되어 사이즈가 커질수록 이들 부분의 여유량 설정에 신중을 기하여야한다.

• 패션비즈니스
• /
• 제18권2호
• /
• pp.54-65
• /
• 2014

This study developed basic pattern for competition figure skating wear for school girls. Figure skating wears are difficult for making basic patterns based on standard size chart, because girls' body size are slimmer and more slender compared to the general girl's and the competition wears such as, swim suit with sleeves are, closely in contact with the player's body. The competition wears for school girl was made with consideration of changing of the body shape, physical exercises, and various specificities according to stretch material. To raise artistic effect while doing beautiful motions, and to assist in facile technique motions, competition wears need to have enough ease on the side line from waist to armpit, from armpit to wrist, and in trunk girth including crotch girth. Also, to stand out in beauty, a costume designing has a proper skirt position, length, flare width, and a tight bodice according to the player's body proportion. Most of the customers are displeased at the high price, unfitness of size, insufficient design, and difficulty in access, since they are not sold in sporting goods store. Therefore, a competition wear's basic pattern was made through scientific and emotional process including concerns on material properties, room for activities, and ideal body proportion. Systemizing the basic patterns of production method will solve high repairing expenses, unsuitable sizing, and improve accessibility for purchase.

• Korean Journal of Radiology
• /
• 제21권11호
• /
• pp.1248-1255
• /
• 2020

Objective: To analyze long-term follow-up sonographic findings of intrathyroidal thymus in children. Materials and Methods: Among 1259 patients with congenital hypothyroidism under 15 years of age who underwent thyroid ultrasonography (US), 41 patients were diagnosed with an intrathyroidal thymus based on US criteria, i.e., hypoechoic solid lesion with punctate and linear echogenicity. In 26 patients aged one to 14 years old, the last follow-up US was performed after 6 to 132 months and compared with the initial US. The lesion was considered to decrease in size if there was a change of more than 2 mm in any dimension. The margin change was divided into well-defined and indistinct, blurred. When the echogenicity changed to a hyperechoic from a characteristic thymic echogenicity pattern, the pattern was considered a hyperechogenic. The changes in size were compared with the changes in shape, margin, and echogenicity pattern. The changes in size, shape, margin, and echogenicity were analyzed the association with the age of last follow-up. Statistical analysis was conducted using the chi-squared test and logistic regression. Results: Fifteen (57.7%) cases were stable in size, and 11 (42.3%) decreased in size, including one that disappeared. Ten (38.5%) cases changed to indistinct margins from initially well-defined margins including one case of initially indistinct margin. Six (23.1%) changed to hyperechogenic, from initially characteristic thymic echogenicity patterns. When follow-up change was compared, decreases in size were significantly associated with lesion changes to indistinct margins (p = 0.004). The age at last follow-up was significantly associated with change to hyperechogenicity (odd ratio, 2.141; 95% confidence interval, 1.144-4.010, p = 0.017). Conclusion: On follow-up US, an intrathyroidal thymus may be decreased in size, with indistinct margins, or show changes to a hyperechoic mass. Decreases in size may be associated with changing to indistinct margins, and changes to hyperechogenicity may be associated with increasing age.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.205-208
• /
• 2007

We injection molded a thin plate with micro prism patterns on its surface and investigated the fidelity of replication of the micro pattern depending on the process parameter such as mold temperature, injection rate or packing pressure. The size of the $90^{\circ}$ prism pattern is $50{\mu}m$ and the size of the plate is $400mm{\times}400mm$. The thickness is 1mm. The fidelity of the replication turned out quite different according to the process parameters and location of the patterns of the plate. We measured the cavity pressure and temperature in real-time during the molding to analyze the effect of the local melt pressure and temperature on the micro pattern replication.

• 복식
• /
• 제20권
• /
• pp.49-62
• /
• 1993

The purpose of this research was to utilize of Pattern Design System(P.D.S) by using AM-300 The conclusion were like these : 1. A coat of basic pattern was selected by design sketch. 2. The basic pattern was input into computer by digitizing. 3. The basic pattern was change into designed shape by using various skills. This system were enabled to draw straight lines, curves, delete lines, sections of lines, extend lines, cut pattern into sections, measure line or section reproduce whole pattern shape of section, rotate and mirror pattern and complete patterns. 4. Automatic grading of finished master pattern have been developed by creation and modification of grading rules of basic pattern. 5. Production pattern added seam allowance, not-ches was generated by P.D.S menu option. 6. Finished pattern design was plotted out 100% and 20% size by AM-300 Plotter. This results will be the basic materials to develop the CAD SYSTEM if some problems were improve. Furthermore, the utilization of P.D.S is expected to be developing in pattern making process.

• 한국레이저가공학회지
• /
• 제10권4호
• /
• pp.18-22
• /
• 2007

In this paper, we suggested the femtosecond laser processing using the mask which makes Gaussian spatial beam distribution to a normalized distribution by Fresenel diffraction. Holography pattern of the size of $320{\times}320{\mu}m^2$ on the Cr thin film on glass substrate with a pixel size of $5{\times}5{\mu}m^2$ was fabricated according to the pattern generated by the iterative Fourier transform algorithm(IFTA) algorithm. We analysed the damage threshold with an assumption the power distribution as Gaussian profile as 45 $mJ/cm^2$. The regenerated image of letters through the diffractive pattern was well recognized at the screen.