• 한국자동차공학회논문집
• /
• 제22권3호
• /
• pp.179-185
• /
• 2014

Average temperature and temperature uniformity in a battery cell are the important criteria of the thermal management of the battery pack for hybrid electric vehicles and electric vehicles (HEVs and EVs) because high power with large size cell is used for the battery pack. Thus, liquid cooling system is generally applied for the HEV/EV battery pack. The liquid cooling system is made of multiple cooling plates with coolant flow paths. The cooling plates are inserted between the battery cells to reject the heat from batteries to coolant. In this study, the cooling plate with U-shaped coolant flow paths is considered to evaluate the effects of coolant flow condition on the cooling performance of the system. The counter flow and parallel flow set up is compared and the effect of flow rate is evaluated using CFD tool (FLUENT). The number of counter-flows and flow rate are changed and the effect on the cooling performance including average temperature, differential temperature, and standard deviation of temperature are investigated. The results show that the parallel flow has better cooling performance compared with counter flow and it is also found that the coolant flow rate should be chosen with the consideration of trade-off between the cooling performance and pressure drop.

• 품질경영학회지
• /
• 제48권2호
• /
• pp.269-282
• /
• 2020

Purpose: The practical design for experiments with mixtures of q components is consisted in the four types of design points, vertex, center of edge, axial, and center points in a (q-1)-dimensional simplex space. We propose a sequential method for the successful construction of the design space in Quality by Design (QbD) by allowing the different number of replicates at the four types of design points in the practical design when the quadratic canonical polynomial model is assumed. Methods: To compare the mixture designs efficiency, fraction of design space (FDS) plot is used. We search for the practical mixture designs whose the minimal half-width of the tolerance interval per a standard deviation, which is denoted as d₂, is less than 4.5 at 0.8 fraction of the design space. They are found by adding the different number of replicates at the four types of the design points in the practical design. Results: The practical efficient mixture designs for the number of components between three and five are listed. The sequential method to establish a design space is illustrated with the two examples based on the simulated data. Conclusion: The designs with the center of edge points replications are more efficient than those with the vertex points replication. We propose the sample size of at least 23 for three components, 28 for four components, and 33 for the five components based on the list of efficient mixture designs.

• 대한원격탐사학회지
• /
• 제35권6_4호
• /
• pp.1341-1350
• /
• 2019

본 연구는 산불 전후 KOMPSAT-3A 영상을 사용하여 산불피해지역을 분석하는 것을 목적으로 한다. KOMPSAT 시리즈 중 KOMPSAT-3A는 적외선 및 고해상도의 멀티 스펙트럼 밴드를 가진 VHR위성이다. 하지만, KOMPSAT-3A를 활용하여 산불피해강도를 분류하는 연구는 부족한 실정이다. 따라서 본 연구에서는 KOMPSAT-3A의 산불 피해강도를 분류하기 위한 새로운 알고리즘을 제시하는 것을 목표로 한다. 또한, 본 연구에서는 산불 피해지역에 대한 참조자료로 Sentinel-2로 생성한 dNBR을 사용하였다. 본 연구의 연구 지역은 2019년 4월 4일 강릉에서 발생한 산불 피해지역으로 선정하였다. 본 연구에서는 산불피해구간을 산정하기 위한 알고리즘으로 오픈 소스 통계 프로그램인 R software의 확률분포함수를 사용하였다. KOMPSAT-3A에서 산불 피해지역은 산불 전, 후 NDVI의 변화에 따라 생성되었다. 산불피해강도는 분포 함수의 표준 편차를 사용하여 각 등급 크기를 산정하였다. 총 5개 구간에 따른 산불 피해 강도가 효과적으로 분류되었다.

• 한국의류산업학회지
• /
• 제14권1호
• /
• pp.109-121
• /
• 2012

This study aims at developing ergonomics patterns for the sleeve of structural firefighting protective clothing through 3D motion analysis in order to ensure efficiency and safety of firefighters who are exposed to harmful environment at work. A new research pattern was developed by applying the total results of 3D motion analysis, changes of body surface length measurements, and 2D data on 3D body shape analysis on the size 3 patterns of the existing coat sleeve. For the sleeves, we used the body surface length of the range of shoulder's flexion and the joint angle of the range of wrist's ulnar deviation. And for the production of structural firefighting protective clothing using the research pattern, we recruited a recognized producer of structural firefighting protective clothing designated by KFI. Unlike everyday clothes, structural firefighting protective clothing should be able to fully protect the wearers from the harmful environment that threatens their lives and should not cause any restrictions on their movement. Therefore, the focus of research and development of such protective clothing should be placed on consistent development of new technologies and production methods that will provide protection and comfort for the wearer rather than production cost reduction or operational efficiency. This study is meaningful as it applied 3D motion analysis instead of the existing methods to develop the patterns. In particular, since 3D motion analysis enables the measurement of the range of motion, there should be continuous research on the development of ergonomics patterns that consider workers' range of motion.

• 한국광학회지
• /
• 제9권2호
• /
• pp.51-58
• /
• 1998

엄밀한 기하광학적 광선추적을 이용하여, 2차원 TPHK가 푸리에변환 렌즈로 사용될 때, 표면양각형태에 따른 특성을 분석하였다. 2차원 TPHK(F/8, 초점거리 15 mm)의 기판두께가 0, 50$\mu\textrm{m}$인 두 경우에 있어서, 표면양각형태를 평면-볼록면에서 볼록면-평면까지 51단계로 나누어, 세가지 입사각($0^{\circ},{2.5}^{\circ},5^{\circ}$)에 대한 광선추적을 실시하였다. 광선추적의 결과로 얻은 rms 스폿크기, $f{\sin}{\theta}$위치에 대한 rms편차, 최고점위치, FWHM(full width at half maximum), 추적에서 제외된 광선수 등을 평가 기준으로 사용하였는데, 그 결과, 기판의 유무에 무관하게, 표면양각높이의 80%가 상면 쪽에 존재하는 양볼록 형태를 가지는 TPHK가 푸리에변환 렌즈로서 가장 우수한 것으로 나타났다.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.65-72
• /
• 1998

The BTA drilling chip is better for deep hole drilling than other self-piloting with pad drilling chips because the large length to diameter ratio allows a unique cutting force dispersion and better supplies the high pressure fluid. Therefore the BTA is useful for many tasks, such as coolant hole drilling of large scale dies, as well as tube seat drilling, which is essential for the heat exchanger, and variable component drilling for automobiles. Deep hole drilling has several significant problems, such as hole deviation, hole over-size, circularity, straightness, and surface roughness. The reasons for these problems, which often result in quality short comings, are an alignment of the BTA drilling system and the unbalance of cutting force by work piece and tool shape. This paper analyzes the properties through an experiment which com¬pared single-edge BTA drills with multiple-edge BTA drills, as well as the shapes of the tools to cause an unbalance of cutting force, and its effect on the precision of the worked hole. Conclusions are as follows. 1) In SMSSC drilling, 60m/min of BTA with single and multi-edged tools proved the best cutting condition and the lowest wear character. 2) The roundness got a little worse as cutting speed was increased, but surface roughness was hot affected. 3) It was proved that the burnishing torque of both drills approached 26%. which is almost the same as the 24% insisted on by Griffiths, and the dispersion characteristic of the multi-edged BTA drill proved better than the single-edge BTA drill.

• 한국치위생학회지
• /
• 제12권4호
• /
• pp.675-684
• /
• 2012

Objectives : The purpose of this study was to develop an instrument for Korean Scaling Fear (KSF)-1.1 in scaling patients. Methods : 402 sample size for scaling patients was studied in Daegu city in July and August of 2011. Mean and standard deviation was calculated in 3 dimensions(FWS: fear while scaling, DDH: distrust on dental hygienist, FAS: fear after scaling). Results : Age of 402 subjects was 36.5 years. In analyzing reliability for item-level, a range of correlation coefficient(${\alpha}$) on item-internal consistency(FWS, DDH, and FAS) was 0.58~0.88(${\alpha}$=0.90), 0.40~0.71(${\alpha}$=0.82), and 0.54~0.63(${\alpha}$=0.82), respectively. Floor(%) and ceiling(%) value on 3 dimensions were also 9.2% and 4.0%, 12.4% and 0.5%, and 17.7% and 1.2%, respectively, therefore, we found statistically high reliability for those(p<0.001). With explanatory factor analysis, this study could generate 3 dimensions(factor 1, eigenvalue 5.41, proportion 0.49; factor 2, eigenvalue 1.50, proportion 0.14; factor 3, eigenvalue 1.04, proportion 0.09) and 11 sub-scales. Also confirmatory factor analysis results showed that the KSF1.1 model was fitted very well in analysis of model fit($x^2$=112.94, df=41, p=0.000; goodness of fit index=0.95; adjusted goodness of fit index=0.92; root mean square residual=0.057). Conclusions : In conclusion, The findings of this study showed that developed reliable and valid instrument for measuring the KSF1.1 in the scaling patients.

• 센서학회지
• /
• 제10권5호
• /
• pp.314-319
• /
• 2001

$CaSO_4$:Tm 열형광체 분말 20wt%를 PTFE와 혼합하여 직경 8.5mm, 두께 $90mg/cm^2$로 압축 성형한 후 중합하여 디스크 형태의 $CaSO_4$:Tm-PTFE TLD소자를 제작하였다. $^{60}Co$ 원격조사장치를 이용하여 0.5Gy의 $\gamma$-선을 조사한 TLD 소자의 균일성은 3.1%로 우수하였다. 이 중에서, 선별한 TLD를 이용하여 고에너지 전자선에 대한 polystyrene 팬톰에서의 흡수선량 분포를 측정하여 최대선량깊이, 50%선량깊이 및 실용비정의 값을 구할 수 있었으며, 조사야 내의 beam 평탄도는 4.5%로 나타났다. 이들 값은 dosimetry system으로 측정한 결과와 비교하여 다소 증가하는 경향을 나타내었다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제7권5호
• /
• pp.451-457
• /
• 2001

본 논문은 컴퓨터단층촬영 영상에서의 자동화된 결절성 폐암의 추출 및 체적계산을 수행하였다. 배경으로부터의 흉부 분리 및 흉부로부터 폐영역으로의 분리를 위해 명암값 임계치 방법이 사용되었고, 폐 경계선 주위에 위치하는 폐암을 폐영역으로 포함시키기 위해 스캔닝-볼(Scanning-Ball) 알고리즘을 사용하였다. 폐영역으로부터 높은 명암값을 가진 부분만을 추출하는데, 이는 폐암, 혈관 또는 부분볼륨중의 하나이다. 추출된 폐암 후보자중에서 폐암을 구별하기 위해 크기, 솔리드(Solid) 형태, 평균값, 표준편차, 픽셀의 빈돗수와 명암값과의 상관계수가 사용되었으며, 식별된 폐암의 체적 및 원형율을 계산하였으며, 이를 내림차순으로 분류하였다. 19개 케이스, 총 621개 영상에 적용한 결과, 95%의 폐암추출 민감도를 가진다.

• 패션비즈니스
• /
• 제20권2호
• /
• pp.181-196
• /
• 2016

This study intended to suggest criteria for selection of subjects by lower body shape types necessary for evaluating slacks. For this, the characteristics were examined by lower body parts which would influence the fit of slacks on 3D human body shape data of the front and sides of the lower body for lower body shaping. The frequency of subjects by lower body shape types and the boundary points for discrimination of each type were suggested so that they could be available in selecting subjects. Using the data from Size Korea(2004), indirect measurement values measured on the front and sides of the lower body among 3D human body shape data of 175 subjects were analyzed. Their height, waist, and hip circumference fell under the range of standard deviation based on the mean of women aged 18~24 years, and then lower body shaping was conducted by combining the front and side shapes of the lower body. The front of the lower body was classified into four sections: average waist/average hip type(F1), average waist/narrow hip tyle(F2), narrow waist/narrow hip type(F3) and narrow waist/wide hip type(F4) and the sides of the lower body were divided into four sections: average abdomen/average hip type(S1), flat abdomen/average hip type(S2), average abdomen/protrude hip type(S3)and round abdomen/flat hip type(S4), and thus total 16 lower body types were created by cross analysis. Besides, discriminant analysis suggested the boundary points for each shape type of the front and sides of the lower body as a criterion for deciding lower body shape type of each subject