• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.5
• /
• pp.768-777
• /
• 2019

This study established a lower garment sizing system for elderly men over 65 years of age based on 535 males selected from the 5th Korean Anthropometric survey. The results are as follows. Most elderly men body measurements were smaller for adult males (except for the waist area); however, abdominal obesity has changed to body type. The standard deviation was applied around the average values of waist circumference and hip circumference for the suggestion of a lower garment sizing system for elderly men. The interval between the designation was ${\pm}2.5cm$ with an average waist circumference of 86 cm and ${\pm}2cm$ with an average hip circumference of 92 cm. A total of 13 designation sections were established in consideration of the cover ratio and cover efficiency. The cover ratio in the 13 nominal sections was 77.2%. The segmental distribution rate presented in the results will also be useful for production planning in specific sizes and enable rational production.

• Fashion & Textile Research Journal
• /
• v.16 no.5
• /
• pp.776-784
• /
• 2014

KS K 0051(2009) was established in 1990 and revised in 1994, 1999, 2004 and 2009. Recently the structure of apparel production and distribution are changing like as small quantity batch production, increase of importing abroad apparel and increase of on-line shopping mall. Based on Social and economic conditions, examine the potential for use of KS K 0051(2009) standard sizing system for female adult's garments are needed. Through which, it was intended to suggestion for the revision of standard sizing system for female adult's garments which can facilitate communication among consumer, producer and sellers. The improvement point was discussed through review of the current KS K 0051 (2009) and abroad standard sizing system for female adult's garments, ISO 3637(1977), ISO 4416(1981), BS EN 13402-2(2002), BS EN 13402-3(2004), JIS L 4005(2001) and GB/T 1335.2(2008). Also, the revision of standard sizing system for female adult's garments was suggested using data of 6th Size Korea. As a result of this study, in the revision, formal wear, casual wear, training wear and under wear were separated to simplify the classification and the classification of body type were excluded. Also, it is possible that size designation was simplified through optional notation and letter code based on bust girth could be marked together in casual wear.

• Fashion & Textile Research Journal
• /
• v.6 no.3
• /
• pp.347-356
• /
• 2004

The purpose of this study is to analyze the sizing system and size designation of ready-made jackets for women. We survey the sizing system and size labeling that have been used and presently practiced by the domestic garment industry of ready-made woman's jacket. In addition, 264 tailored jackets are measured for the sake of this study. The jackets are classified into 3 groups(young, missy, and madame) according to the target age of the brand. The result shows that size labeling involves body measurements(85-94-160), size code(55, 66) or simplified letter(S, M, L). However, the correspondence of size information and ease tolerances of jackets is not consistent and each company has its own sizing system. There are significant differences among young, missy, and madame group on the bust girth of apparel in 66size code. The average apparel size piteh measurement distributions(bust girth and hip girth respectively) of young group are 9cm and 13cm in 55 size code, those of missy group are 7 em and 3 cm in 66 size code, and those of madame group are 6cm and 4cm in 77 size code. The ease of bust girth and hip girth in missy group are much more than other groups.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.94-101
• /
• 2020

This helps plus-size consumers purchase ready-made clothes and improves fitness by analyzing the upper body shapes of abdomen-obese adult males; in addition, it creates a size system based on each size interval of obesity shapes. The criteria for the 572 male subjects surveyed were over 25 kg/㎡ of the BMI, over 90 cm of waist, and over 0.85 waist hip ratio. The results were as follows. First, the higher the age group, the higher the degree of abdominal obesity in each age group. The degree of obesity decreases age increase; however, was the risk of abdominal obesity increased. Second, Compared to standard body types, the average body size of Abdomen-obese males is significantly larger, especially in the waist area than in the chest area. Third, to propose a size system for abdominal obese adult males, 16 sections with a final 2% rate of appearance were finally adopted as suit-tops size system for abdominal obese adult males by applying a 3 cm dimension gap between each designation as specified in the KS standard. The coverage ratio for the 16 sections was 72.6% and the coverage effienciency was 4.5%. The results of this study can be used in a various clothes; in addition, the activation and segmentation of the plus-size market are also believed to be significant.

• Journal of Fashion Business
• /
• v.4 no.4
• /
• pp.135-151
• /
• 2000

The porpose of this research is helping product developments and establishment men's marketing strategies. This contents are divided into two parts; the dress shirt's wearing condition and the dress shirt's buying condition. The subjects of the research were male that aged 25-50 and their company is resided in Seoul. The conclusion of this research is summarized as below ; 1. Many consumers have wrong term recognition of dress shirt. Most of men know their dress shirt's sizing designation as casual method(ex, $\cdots$95, 100$\cdots$). Therefore it is happened fitness complains. Dress shirt's wearing frequency for a week is 1-2 days or 5days mostly. A number of dress shirt’s wearing period for one is 6-12 months. Dress shirt‘s wearing frequency fand wearing period varies according to their age, unmarried or married situation, scholarship, occupation. So the manufacturer of men's dress shirt grasps the factor's for their character. 2. The conclusion of dress shirt's buying motivation is need better than impulse buying. If company planning season event, the selling will be improved. Most of men buy their dress shirt by themselves. It means a lot of men are interested in their clothes comparing to old days. And men's favorite purchase place is a department store and agent. when they purchasing, the color and size is very important factor. But dress shirt's sizing designation is not yet established. Therefore the dress shirt's sizing designation is needed as possible.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.3
• /
• pp.391-401
• /
• 1999

For proper communication among manufactures in various countries and for consumers' convenience in purchasing garments imported from foreign countries the ISO revised the size designation system in 1969. Since 1970's various countries have revised their standard sizing system by adapting the ISO system . The purpose of this study is (1) to satisfy domestic consumer's needs by developing a sizing system based on that of ISO for Korean women in their early twenties and (2) to contribute to entering the international fashion market by manufacturing high quality apparel products The results were as follows: (1) By measuring and analyzing of 464 female between the ages for 18 and 24 the data indicated that body height could be divided into following three groups. S(Short) : 152cm (19.2%) R(Regular) : 160cm (57.8%) L(Long) : 165cm(22.6%) (2) According to the results to analyzing body type of this study the medium hip(drop 6) is 47.4% the large hip(over drop 12) is 42.7% the 2 types covers 90.3% (3) Comparing Korean women's size with foreign women's size DOB size code is 17 JIS size code is 9AR, FNOR size codes are 36n. 38n. and Italian size cods are 40, 42

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.8
• /
• pp.1240-1247
• /
• 1999

The purpose of this study was to classify size specifications of Korean adult male for the men's ready-made garments especially jacket and dress shirts By the stratified sampling method data were collected by the real anthropometric measurement. Sample size was 263 subjects as the sample and their age range was from 36 to 43 years old 66 variables from the direct anthropometric data were applied to analyze. ANOVA is SPSSWIN 8.0 package was applied to the data and the expected frequency distribution of 10.000 men was calculated by the extraction of density function. This study was performed to classify size specificatios by the control dimensions. The drop values of 9,12 and 6 have the high coverage rate of 28.52% 23.44% respectively Obese body type ; H type HD type and HE type are composed of the majority of 55.47% of the subjects. According to the drop values size specifications and distribution of control dimensions are predicted About 69.82% of the expected frequency distribution were covered by 19 size specifications.

• Korean small business review
• /
• v.41 no.2
• /
• pp.25-50
• /
• 2019

Although Korean government has implemented size-dependent policy, so called "the designation of SMEs-suitable industry", promoting SMEs growth, our understanding in the effectiveness of the policy is limited. We investigate the effect of the policy on SMEs performance in food product and beverages industry, which accounts for the majority in the SMEs-suitable industry. From the perspective of sales, profitability, and R&D intensity, which is regarded as indigenous effort for growth, we find the heterogeneity in the effectiveness of the policy across the sub-sectors in the industry. However, overall the policy does not significantly contribute to the growth of sales, profitability, and facilitation of R&D activity for indigenous innovative efforts of SMEs. Our study advances the theoretical discussion on the effect of the policy with the disaggregated level of analysis, i.e, sub-sector level. Our findings also contribute to the resolution of social and political conflicts between pros and cons of the policy. Our study suggests that policy makers should develop more sophisticated policy that incorporate the specific characteristics of individual sub-sectors. They also need to invest more resources in enhancing the effectiveness of the policy and accelerating SMEs innovative efforts.

• Proceedings of the ESK Conference
• /
• 1998.04a
• /
• pp.13.2-18
• /
• 1998

The purpose of this study was to investigate the attitude related to the purchasing and wearing dress shoes for Korean adult women. 480 adult women age from 18 to 86 years participated in the survey and they were recruited in Seoul and Taejeon. The results were as following; 1. The most common dress shoes sizes were 235 and 240. 2. The subjects age uder 30 years perceived that the fashion is mor important than the comfort when they purchase dress shoes. The suvjects age over 60 years preferred shoes design giving comfort than fashionably designed one. 3. The most frequent complainings with dress shoe design were narrow shoe width, the stiffness of material, and discomfortable sole shape. 4. The letter size designation of dress shoes was not fulled recognized by the consumers. The use of letter size designastion was extremely low when they purchased shoes that fit their foot.

• Structural Engineering and Mechanics
• /
• v.43 no.6
• /
• pp.795-821
• /
• 2012

The size and topology of geometrically nonlinear dome structures are optimized thereby minimizing both its entire weight & joint (node) displacements and maximizing load-carrying capacity. Design constraints are implemented from provisions of American Petroleum Institute specification (API RP2A-LRFD). In accordance with the proposed design constraints, the member responses computed by use of arc-length technique as a nonlinear structural analysis method are checked at each load increment. Thus, a penalization process utilized for inclusion of unfeasible designations to genetic search is correspondingly neglected. In order to solve this complex design optimization problem with multiple objective functions, Non-dominated Sorting Genetic Algorithm II (NSGA II) approach is employed as a multi-objective optimization tool. Furthermore, the flexibility of proposed optimization is enhanced thereby integrating an automatic dome generating tool. Thus, it is possible to generate three distinct sphere-shaped dome configurations with varying topologies. It is demonstrated that the inclusion of brace (diagonal) members into the geometrical configuration of dome structure provides a weight-saving dome designation with higher load-carrying capacity. The proposed optimization approach is recommended for the design optimization of geometrically nonlinear dome structures.